Hi John,
appLog.txt
I also tried using datatype string but it doesen't work. Meanwhile I have studies the log files more detailed and found the following behavior:
when defining the device skeletal and when updating the derived device (first approx. 25 lines in the log file V_STATUS is declared as string with values 51 resp. 52 as specified in the web interface. The entity is "Modul 433 MHz".
Later on, when using the toggle switch in the web interface the value has changed in the decription in the log file (see line 164 or 185) value has been changed to on/off. With this definition it seem that the mysensors-Plugin is feeded has been changed from the specified values.
My conclusion is that the change is taking place somewhere outside the mysensors-plugin.
By the way, if I change the type to string do I have to use quotation marks in the web interface?
Thanks a lot for your support.
Martin
i think i finally get it.
It is impossible... well the only way to let nodes communicate with each other is when a gateway is available (directly or trough other nodes) when the node is starting up.
This forum discussion is explaining me the most..
a solution may be.. transform the node that is always on to an gateway. And use antoher channel.. Sidenode; then you can't tell the controller what the status is.
Is there realy no way that this can supported? Node to node comunication without the need of an gateway inside the network? Skipping the registration and just send the message around.
perhaps i will dive into the source one day and change the registration behavior.
Thanks anyway for the help and the very fast responding.
Hi all
we are working on a new web client for our domotic framework.
Here some screenshots
It's a WIP so we need any help to complete it.
The code is available at https://github.com/freedomotic/fd-vue-webapp/
It's been a while since I posted here, but openLuup has continued development and is now a really very capable controller with extensive plug-in compatibility with Vera. Latest version always available from GitHub here https://github.com/akbooer/openLuup
