💬 MyGateway
-
-
@Gerator - Nice project! How did you solve dual SPI channels for ethernet and RFM radio?
Ethernet gateway using Arduino UNO with Ethernet shield stacked JP1 should be 1-2 and JP2 2-3.
-
RFM69 and Ethernet shield share SPI bus, each one with its own CS line. Ethernet shield uses pin 10 so JP1 should use pin 6 for the radio. Issues sharing SPI bus seems to be due to bad SEN line handling as described here. The official Arduino ethernet shield suffered from this, but most commonly used clones work ok. Shields including 74LVC14 as in the pic should work ok.
-
This project is very cool!
I received my pcbs to try it this morning , i'll tell you if i can make it work
-
Works perfectly ! So many thanks to @Gerator
-
@hlehoux glad to hear that!!
1 out of 6
Suggested Topics
-
Parallel Gateways
General Discussion • 29 May 2020, 11:12 • jocke4u 29 May 2020, 12:35 -
💬 NModule Temperature, Humidity, Light, Door sensor shield
OpenHardware.io • 28 May 2017, 16:09 • openhardware.io 27 May 2018, 12:32 -
💬 Arduino Serial Gateway for RFM69HW
OpenHardware.io • 24 Jan 2017, 12:49 • openhardware.io 8 Jun 2017, 10:06 -
Building a gateway with two transport layers
Hardware • 15 Aug 2021, 10:31 • Giovanni Chiva 15 Aug 2021, 18:02 -
Do we have any option to enable queue in Gateway node?
General Discussion • 7 Sept 2018, 07:12 • jkandasa 7 Sept 2018, 08:29 -
Communication problems between MQTT Gateway (OrangePi) and Node (Arduino Nano)
Troubleshooting • 1 May 2019, 19:22 • gammlerstyle 5 May 2019, 18:01 -
Issues Converting to Ethernet Gateway (Uno)
Vera • 8 Oct 2014, 15:57 • RyanAHolland 15 Oct 2014, 01:10 -
Gateway USB and Gateway Ethernet
General Discussion • 23 Aug 2020, 07:36 • Daniel RUIZ9 15 Nov 2020, 20:11
