Gateway to support dual radio

[Westie]

I am looking to extend my nrlf01 Mysensor network using rfm95.

Can this be done at the gateway?

[BearWithBeard]

@Westie Yes, with the 2.4 (alpha) development version of the MySensors library you can combine multiple transports in a single network. Defining both the NRF24 and RFM95 in the gateway sketch should be all you need to do.

See here for more info including example sketches:
https://forum.mysensors.org/topic/11135/something-s-cooking-in-the-mysensors-labs/18

You can download the latest 2.4 release from here:
https://github.com/mysensors/MySensors/tree/development

[Westie]

@BearWithBeard thanks for the info.

I see a few different mcus have been tried.

Anyone had success with a nano or is that beyond its capability?

[BearWithBeard]

@Westie That feature can also be used with the Arduino Nano, or any other ATmega328P-based board.

I had NRF24 + RFM69 running for a couple of days using a Nano as an Ethernet MQTT gateway and it worked fine as far as I remember.