"0" Temp and Pressure readings from BMP280
-
Please assist if possible,
I am using an Arduino UNO as well as a ESP8266 card with a BMP280 installed
I am using the following sketch to try to get familiar with this operation
SparkFun_BME280/I2C_ReadAllData.ino at master · mhaack/SparkFun_BME280 (github.com)
On the serial port I am getting a "0" reading for Temp C and "0" Pa which possibly accounts for an extremely high Altitude reading.
From my untrained eye, this looks like a calibration issue but I am probably wrong. Possibly a coding issue.
I cannot see what the issue is.
-
Hi @Merlotmaker,
If you want more reactions from members, you should provide more information.
- what for sensor do you have, because you are speaking about BMP280 and BME280
- the lib you are referring to is a specific one for the https://www.sparkfun.com/products/13676
- how did you connect your sensor to the UNO?
- did you follow this guide already? https://learn.sparkfun.com/tutorials/sparkfun-bme280-breakout-hookup-guide
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login