Domoticz full integration
-
@hek I am almost done with the python -Domoticz "full integration" but strugling with a few message types. The code for Vera is a good source for information but it is hard to determine the role of the controller in the construction/routing of the network. For now I assumed only node numbering and keeping track of the sensors. Is the controller supposed to do something with the relay nodes? what is the function of the I_CHILDREN message?
-
I've managed to get it to work.
First issue - since always I've reported temperature and humidity altogether (from DHT sensors).
Currently I can't specify one IDX for two values and I can't see in code where I could put two values to report in Domoticz at once.
They use to be reported in one URL.@andriej I will be posting a new version tomorrow which adds maximum functionality for Domoticz (from my view): combined sensors (trick), node numbering, inclusion and an external database in JSON. I will keep it running tonight to test the stability. ...
-
Major update (but still very beta...,) supports:
- dynamic sensor inclusion i.s.o. fixed nodes.
- more sensor types and support for combined domoticz devices (e.g. Temp, Hum, Baro)
- external JSON database
The python script is built around a 'dictionary' based Database with the MySensor-Domoticz translation. The script is running stable with 20+ sensor/actuators and limited cpu load on raspberry pi (15%).
Known issues:
- You need to edit the JSON database yourself if you need combined Domoticz devices eg. (Temp/Hum/Baro). Not difficult
- Need to create Switch types yourself in Domoticz , then assign these in the database
- Usage/power not supported yet (need a "multiple value" trick..)
You can find the attempt at: Domoticz-MySensors with a small instruction in the first few lines
all suggestions welcome..
-
Domoticz:
Starting with a native implementation, thanks to Ad for providing the RF interfaces.
Maybe best (for domoticz) to continue on the forum,
i need serial logs of all possible combinations and meaningnode-id;child-sensor-id;message-type;ack;sub-type;payload
we developers probably have to do some special tricks to get some nice sensors
for instance, it would be nice if there where subtypes for:
- Temp+Hum
- Temp+Hum+Baro
- Kwh+Watt
- Wind+Gust+Direction
I can not watch this forum, if you want to contribute, plz use the domoticz forum
-
Domoticz:
Starting with a native implementation, thanks to Ad for providing the RF interfaces.
Maybe best (for domoticz) to continue on the forum,
i need serial logs of all possible combinations and meaningnode-id;child-sensor-id;message-type;ack;sub-type;payload
we developers probably have to do some special tricks to get some nice sensors
for instance, it would be nice if there where subtypes for:
- Temp+Hum
- Temp+Hum+Baro
- Kwh+Watt
- Wind+Gust+Direction
I can not watch this forum, if you want to contribute, plz use the domoticz forum
-
In latest release of Domoticz I can see first implementations of MySensors!
Maybe it's worth a shot for someone to register on Domoticz forum and help their team out? -
Posted a new beta of domoticz.
Lots have been changedIf anyone can supply me with serial log messages of:
S_LIGHT_LEVEL
S_WATT
S_KWHThat would be helpfull
With regards,
Rob -
@AWI said:
@hek I am almost done with the python -Domoticz "full integration" but strugling with a few message types. The code for Vera is a good source for information but it is hard to determine the role of the controller in the construction/routing of the network. For now I assumed only node numbering and keeping track of the sensors. Is the controller supposed to do something with the relay nodes? what is the function of the I_CHILDREN message?
@hek said:
Just skip it. It's deprecated and will be removed.
@hek:
The I_CHILDREN+"C" message is useful during development/implementation/repositioning of nodes with repeater functionality (changing node location may alter routing).From my experience, this function is helpful and should even be expanded to clearing the parent_node_id: i.e. I faced the situation where the parent node (not gw) was out of range and the node could not communicate back to the gateway. The only resolution is to clear the eeprom or sending the I_CHILDREN + "C" command
-
@andriej I have managed to get a MySensor DHT11 sensor reporting consistently in Domoticz, via the Ethernet option. My next steps are to try a couple of other sensor types (eg distance, switches) and multiple sensors on one arduino node. After a first look at how the Serial and Ethernet options have been done in Domoticz, it looks to me like MQTT might also provide a third 'transport' option for integrating MySensors, with some development. I will be building my knowledge across MySensors and Domoticz over the coming week or two, so might be able to contribute to integration development in the future.
-
I've motion sensors, barometer, lux sensors 4 dallas sensors on 4 arduinos fully working on domoticz.
It's al working fine, sensors don't always appear in the right tab, but that's no problem for now, new to mysensors, very happy with it! -
Status of native Domoticz MySensors support:: For the ones who are interested @GizMoCuz did a great job in building native MySensors support in Domoticz. As documentation is lagging behind ;) I have examined the code and come up with a basic understanding of functionality.
First of all: you need the beta version of Domoticz (can be enabled in setup->settings) for now to get MySensors support. By enabling the MySensors hardware (setup->hardware) you can enable MySensors USB/ LAN interface.The supported "V" types as of today for "SET" (read from the code):
V_TEMP:, V_HUM, V_PRESSURE, V_VARx, V_TRIPPED, V_ARMED, V_LOCK_STATUS, V_LIGHT, V_DIMMER, V_DUST_LEVEL, V_WATT, V_KWH, V_DISTANCE, V_FLOW, V_VOLUME:, V_WIND, V_GUST, V_DIRECTION, V_LIGHT_LEVEL,:V_FORECAST,: V_VOLTAGE, V_UV, (so almost all )The list for 'REQ' is (and will be.?) limited to V_LIGHT, V_DIMMER and V_VAR types. If anyone needs more please address this on the Domticz forum as I am out of arguments.
Be aware that the MySensor support is beta, but very promissing.
