Project boxes for MySensor's nodes and gateway?
-
I ordered one of these boxes a few weeks ago (hasn't arrived yet). My requirements:
- looks nice - will be mounted where it's visible.
- reasonably deep - I'm planning on using external mini xlr connectors for things which require a 12 mm hole.
- side wall on either the top or the bottom piece (see 2) - if it's split in 1/2 some boxes, it's harder to mount connectors.
- big enough for a custom PCB with 4-5 JST style connectors
The box I ordered is a reasonable match. The thing I don't like about it is that the top of the box is the deep part (the back part is thin - like a lid). I'd like to mount a PCB into the box, then mount external connectors into the box sides, then wire the connectors to the PCB. In the box I ordered, the PCB would be on the top (outside) of the box. That makes it a lot harder/impossible to add switches, LED's, or a display to the front of the box. It's not a deal breaker, but if I could find a box that was like the one I ordered but where the top and bottom thickness dimensions were reversed, that would be nice.
I was really hoping I could find a single box that worked everywhere (including outside) so I could design a single PCB (or a few variations) for the various projects I want to build. So far that's looking unlikely...
-
Waho that box looks great ("router style"). Does anyone know a source thats available form germany? (also ebay/aliexpress).
The video isn't working for me either.
-
@chickey said:
https://www.youtube.com/ watch?v=e1y4IG6YSoc&list=WL&index=16
Thanks :)
The youtube link still doen't work for me though. I am just getting the youtube landing page
-
@chickey said:
https://www.youtube.com/ watch?v=e1y4IG6YSoc&list=WL&index=16
Thanks :)
The youtube link still doen't work for me though. I am just getting the youtube landing page
@LastSamurai you need to paste in the test after the link onto the end of the url. Else search for "Scullcom Hobby Electronics #14 - GPS System with Arduino Mini & OLED Display" in youtube.
-
The Custom Enclosure Factory on AliExpress has some nice cases.
And for a ghetto option, I've got a few old Mentos chewing gum containers around the place :) (This one is stuck to the side of the Central heating unit with magnets.
-
i will make my own cases for my 25x50 boards with 2xAA....see => http://forum.mysensors.org/topic/1901/my-own-board-50mm-x-24mm/18
-
My compact serialGateway with nrf201 long range , power indicator LED and USB cable connected to Pi.
-
@Dheeraj: Where did this case come from ? Was the board inside custom made or pro mini ?
-
My Gateway:
A Gateway and a node for a friend:
Comparison of the MysenSor and the famous RFXTRX:
And the solar powered+LiPo water proof box:
-
My Gateway:
A Gateway and a node for a friend:
Comparison of the MysenSor and the famous RFXTRX:
And the solar powered+LiPo water proof box:
-
I'm starting to think I'll need a 3D printer after all.... Any recommendations on which one to get?
-
Thanks. I looked into it this morning. I guess pre-built boxes are what's best for me. A simple black box like this or similar will probably do the job:
-
@Dheeraj: Where did this case come from ? Was the board inside custom made or pro mini ?
@GertSanders purchased it from ebay, yes inside it is mini pro and nrf radio module ..
-
Thanks. I looked into it this morning. I guess pre-built boxes are what's best for me. A simple black box like this or similar will probably do the job:
-
I've got a few of these with 2xAAA, Arduino pro + radio + DS18b20 crammed into them
@mvdarend has my vote though... much cheaper and fun
-
I've got a few of these with 2xAAA, Arduino pro + radio + DS18b20 crammed into them
@mvdarend has my vote though... much cheaper and fun
@blackdog65 said:
I've got a few of these with 2xAAA, Arduino pro + radio + DS18b20 crammed into them
@mvdarend has my vote though... much cheaper and fun
Good find.
3x AA seems like magic number to aim for. It gets you 4.5v, so you can run directly from battery with no divider.
-
@epierre said:
My Gateway:
A Gateway and a node for a friend:
Comparison of the MysenSor and the famous RFXTRX:
And the solar powered+LiPo water proof box:
What kind of box is that? Do you have a link where i can order these?
