MyController+Domoticz at same time?

[ErrK]

@mfalkvidd do you have both MyController and Domoticz on the same Raspberry Pi?
I will start from the Domoticz Raspberry Pi image and then try to install MyController.
I use a ESP8266 gateway. Do you have any tips before i start?

[mfalkvidd]

Yes I use the same raspberry pi for both controllers. You probably need the newer models with 1GB ram.

I'm not really using mycontroller yet, have not spent time working with it.

[sundberg84]

I tried both on a ethernet gw, but both freeze after some minutes. This has worked before but when domoticz included the gateway ping it begun. Im.now using domoticz and ethenret and build a serial gw and run with mysc for ota updates.

[ErrK]

@mfalkvidd i have the new Raspberry pi 2.
The installation was simple.
But i now i only have my gateway in MyController. Using Domoticz for my z-wave.

@sundberg84 ok.
Are you using MYSbootloader or Dualoptiboot?

[sundberg84]

@ErrK MYSBootloader, i showed Tekka this so he is aware of the problem.

[ErrK]

@sundberg84 ok.
I will try with MYSBootloader.
Need to figure out how to do it on osx.
Have only find the tutorial for windows yet.

[jkandasa]

Currently we are working for MyController 0.0.3 version. almost done. we will release it soon. It has many changes in front end(Enterprise level) and back end.

If you want to try, please compile yourself from development branch https://github.com/mycontroller-org/mycontroller or let me know I will post compiled image.

It will be helpful for MyController if you report any issue on this 0.0.3 version, we can fix it before release

beta testers required...

If you want MyController in your language send request here https://www.transifex.com/mycontrollerorg/gui-angularjs/

[petewill]

@sundberg84 said:

I tried both on a ethernet gw, but both freeze after some minutes. This has worked before but when domoticz included the gateway ping it begun. Im.now using domoticz and ethenret and build a serial gw and run with mysc for ota updates.

Can you describe this a little more? I have been experimenting with Domoticz as a secondary controller (on a Raspberry Pi using Node-Red) but my Ethernet Gateway has been crashing fairly regularly (about once a every other day on average). I'm not totally sure where the problem is occurring but it seems to be related to my Pi setup. If I shut the Pi down the Ethernet Gateway seems to stay alive longer (I haven't had too much time to test this theory though because I'm testing a sensor with the Pi). I also recently updated to 1.5.1 so I'm not sure if that has anything to do with it. Previously I was on 1.4.1 and the gateway ran for months without any issues. Just thought I'd reach out to you since it seems you may have had a similar issue. Thanks!

[sundberg84]

@petewill My Domoticz crashed 30sec after i connect Myscontroller to same ethernet gateway. Also Myscontroller seems to crash and when i disconnect Myscontroller, Domoticz resets the connection and reconnects itself with a error in the log.

[petewill]

@sundberg84 Thanks! Ok, this behavior is different from mine. I was hoping we had a similar experience.

I just downgraded from the beta to the latest stable release. I'll see if that helps...