Sensebender Module Problem
-
I just received my Sensebender today and I am having an issue getting it work correctly.
When I tie A0 to GND for the self test this is what I get from the Serial Monitor:
Sensebender Micro FW 1.3 - TestMode
Testing peripherals!
-> SI7021 : ok!
-> Flash : failed!
-> SHA204 : Ok (serial : 0123753C526A1A06EE)
Test finished
----> Selftest failed!Also, in normal mode no data gets transmitted to my Gateway. The only change I made to the sketch was to specify a unique Node ID (4) in this case.
Any suggestions?
Thanks,
Tony
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login