Big Wish - a working system including up-to-date Reference

hek

Sorry to hear that you are experiencing problems.

The core team is working on releasing 2.0.0 and we will update the main site (including the examples) when it's been released. It still needs testing though, that's why we urge people to run it.

All the examples in 2.0 has been updated to work with the new sketch structure. So if you run it your local IDE it shouldn't be much troubles.

The ESP8266 still suffers from stability problems, most seems to stem from powering issues and things out of our controls (like bugs in the ESP core). But the latter should get better with time as the the ESP-Arduino seems to get much attention by a great community and the tremendous work done by Igrr.

As for documentation and updates of the main site, it suffers, as my time is limited and I've been prioritising other MySensors related things like getting the openhardware.io site up and building a sensor testing ground for the community [not released yet].
But when 2.0 has been released, the main site surely needs some attention.

And Yes, I've got a 8h full time work and a family like all the other core team members.

kr0815

Hello Hek,

thanks a lot for your answer, i hopefully wasn´t to harsh ?

When do you expect 2.0.0 to come out ? Maybe it makes more sense for me to wait and put the project aside till then?

I didn´t want to change to the developer version, no need for the extra features, all i wanted was one / some wifi gateways because i have some positions in the house i couldn´t cover with wired gateways - and especially for the wifi gateway many people here said go with the dev version, it solves a lot of problems.
That´s where the problems started then, the mixture between old and new doesn´t work well in the arduino IDE.
Also some older examples here in the forum, i can´t use because i get compiling errors with the new developer version

I try to investigate further - so are the 1.5 version and the 2.0 dev compatible regarding already existing sensors ?
( I have to confess Arduino IDE makes it even worse, even when installing the portable version, it uses files from wherever...)

As you are speaking about stabilty problems regarding the Wifi-Gateway - i was thinking i made some faults, tried almost everything, but as i have many of the ESP8266 running without any problems with ESP-Easy, i couldn´t make that much faults regarding power supply and such things
(Easy thing to try , dev. Wifi Gateway, just connected to a putty sesion, dev relais sketch, as soon as powering the relais node on, it will crash)

So would you or others here suggest to use the wifi client at the moment, or better wait ?

At the moment, at germen FHEM Forum, some ordered about 100 PCBs to build Wifi Gateways, at the moment they are sending the first out, sounds stupid but i´d be lucky if they all work and i know a have to find the fault in my doing

hek

Mostly a structural thing left before the release of 2.0 (so the library can be downloaded directly from the Arduino Library Manager).
So I suggest you try to use it.

1.5 and 2.0 sensors should be compatible over the air.

If the relays are connected directly to gateway it sounds like a powering issue. Do you have the same problem if you try removing the relay and run the same command?

If the relay is attached to some other node and the gateway crash when you try to turn it on over the air, it sounds like a bug.

kr0815

Not really something for feature request, more trouble shooting...

But the relay sensor was just an example, not connected to the gateway, node by itself.
I don´t even have to switch the relay - just the Wifi Gateway running, connected to putty
As soon as a sensor sends his startup message, Wifi Gateway crashes, no longer reachable

I´d be really happy if someone could try it, maybe it´s still my fault:
Power Up Wifi Gateway, then power up relay node ( both dev version) , i think it has something to do because relay node is also a repeater ?

hek

Ok, I just verified your setup on the latest dev branch.

Uploaded the relay sketch on a node (unmodified).
Flashed an esp with attached NRF-radio (static ip).

> telnet 192.168.178.87 5003
Trying 192.168.178.87...
Connected to 192.168.178.87.
Escape character is '^]'.
0;255;3;0;14;Gateway startup complete.
2;255;0;0;18;2.0.0-beta
2;255;3;0;6;0
2;255;3;0;11;Relay
2;255;3;0;12;1.0
2;1;0;0;3;

And the same time on the gateway while powering up the relay node.

ip:192.168.178.87,mask:255.255.255.0,gw:192.168.178.1
.IP: 192.168.178.87
0;255;3;0;9;Init complete, id=0, parent=0, distance=0
pm open,type:2 0
0;255;3;0;9;Client 0 connected
0;255;3;0;9;read: 2-2-0 s=255,c=3,t=15,pt=0,l=2,sg=0:
0;255;3;0;9;send: 0-0-2-2 s=255,c=3,t=15,pt=0,l=2,sg=0,st=ok:
0;255;3;0;9;read: 2-2-0 s=255,c=0,t=18,pt=0,l=10,sg=0:2.0.0-beta
0;255;3;0;9;read: 2-2-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0
0;255;3;0;9;read: 2-2-0 s=255,c=3,t=11,pt=0,l=5,sg=0:Relay
0;255;3;0;9;read: 2-2-0 s=255,c=3,t=12,pt=0,l=3,sg=0:1.0
0;255;3;0;9;read: 2-2-0 s=1,c=0,t=3,pt=0,l=0,sg=0:
0;255;3;0;9;read: 4-4-0 s=255,c=2,t=0,pt=1,l=1,sg=0:75
0;255;3;0;9;read: 4-4-0 s=1,c=3,t=8,pt=7,l=5,sg=0:23.5
0;255;3;0;9;read: 4-4-0 s=2,c=1,t=1,pt=2,l=2,sg=0:40

No crashes or nothing. It even picked up another sensebender module reporting temperature.

The only difference I can see is that you use putty to connect.

martinhjelmare

@hek

The second and third lines from the end of the last log don't make sense to me. Sensor 255 requests temperature, payload 75? Sensor 1 internal message parent response 23.5?

hek

@martinhjelmare said:

The second and third lines from the end of the last log don't make sense to me. Sensor 255 requests temperature, payload 75? Sensor 1 internal message parent response 23.5?

Yes, strange. I suspect it is some trace of my "production" serial gateway (on the same freq) that is doing hardware acks while the esp node is listening to all of this (and also acks the same message). Hmm.. I should probably have turned the serial gw off before the test to get a cleaner log.

kr0815

Hello Hek,

thanks a lot for all the effort trying to help me

Thats what the relay node gives me when plugging in power:

Starting sensor (RNNNA-, 2.0.0-beta)
Radio init successful.
send: 100-100-0-0 s=255,c=3,t=15,pt=0,l=2,sg=0,st=ok:
send: 100-100-0-0 s=255,c=0,t=17,pt=0,l=10,sg=0,st=ok:2.0.0-beta
send: 100-100-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0
read: 0-0-100 s=255,c=3,t=6,pt=0,l=1,sg=0:M
send: 100-100-0-0 s=255,c=3,t=11,pt=0,l=5,sg=0,st=ok:Relay
send: 100-100-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,st=ok:1.0
send: 100-100-0-0 s=1,c=0,t=3,pt=0,l=0,sg=0,st=ok:
Init complete, id=100, parent=0, distance=1

Thats what the Gateway logs, after that it´s unreachable

0;255;3;0;14;Gateway startup complete.
100;255;0;0;17;2.0.0-beta
100;255;3;0;6;0

That´s the serial output of the gateway, 111 is another node:

0;255;3;0;9;Radio init successful.
....scandone
state: 0 -> 2 (b0)
.state: 2 -> 3 (0)
state: 3 -> 5 (10)
add 0
aid 7
pm open phy_2,type:2 0 0
cnt 

connected with Power-LAN, channel 6
dhcp client start...
chg_B:-60
...ip:192.168.178.90,mask:255.255.255.0,gw:192.168.178.1
.IP: 192.168.178.90
0;255;3;0;9;Init complete, id=0, parent=0, distance=0
0;255;3;0;9;read: 111-111-0 s=1,c=1,t=16,pt=0,l=1,sg=0:0
0;255;3;0;9;read: 111-111-0 s=1,c=1,t=16,pt=0,l=1,sg=0:1
0;255;3;0;9;read: 111-111-0 s=1,c=1,t=16,pt=0,l=1,sg=0:0
0;255;3;0;9;read: 100-100-0 s=255,c=3,t=15,pt=0,l=2,sg=0:
0;255;3;0;9;send: 0-0-100-100 s=255,c=3,t=15,pt=0,l=2,sg=0,st=fail:
0;255;3;0;9;read: 100-100-0 s=255,c=0,t=17,pt=0,l=10,sg=0:2.0.0-beta
0;255;3;0;9;read: 100-100-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0
0;255;3;0;9;read and forward: 0-0-100 s=255,c=3,t=6,pt=0,l=1,sg=0

strange you don´t have this "read and forward" message ?

hek

Looks like the second fast consecutive send kills the gateway. What measures have you taken to ensure ESP/radio powering?

What type of NRF radio are you using?

kr0815

I tried many things regarding power supply, 47uF and 100nF both on the ESP and NRF, even feeded it with a good laboratory power supply (max 3A).
I can´t imagine it´s a power problem, but could try tonight to even feed them with different power sources ?

But i found a similar thread / same problem:
http://forum.mysensors.org/topic/3012/packet-freezes-wifi-gateway-esp8266

But i don´t use any bootloader

kr0815

So just to be totally sure and to help me and hopefully others, i did the following:

I feeded ESP and NRF from different power supplys-result is still the same, ESP hangs, no response

The Power supply of the ESP is the same as i use for many ESP-Easy-Projects, i even flashed ESP-Easy on these 2 boards i try to get the MySensors-Gateway running, no problems

You asked which nRF i use - they are from china :-) different sellers, different looking, some with external antenna, all the same results

hek

I've tried to stress test again here but I still cannot reproduce the hangs.

Are you using this gateway sketch:
https://github.com/mysensors/Arduino/tree/development/libraries/MySensors/examples/GatewayW5100

And this Relay sketch:
https://github.com/mysensors/Arduino/tree/development/libraries/MySensors/examples/RelayActuator

Unmodified (except for WLAN SSID)?

kr0815

The second one yes, but the first one, i´m not using a Ethernet Gateway, but a Wifi Gateway with the ESP8266

that´s the one i use: https://github.com/mysensors/Arduino/tree/development/libraries/MySensors/examples/GatewayESP8266
nothing modified, even still with DHCP

I also have a Ethernet Gateway, which is running since months, the problems started with the Wifi / ESP Gateway

Could you maybe have a look at the link above ? In this thread, Yveaux asked you for some help, maybe tha´t the point the problem comes from ?

hek

Yes, I meant GatewayESP8266 ;)

I don't get the "read and forward" print at all. Even when sending out a command to the node (from telnet/nc).

I guess you've updated library to the latest and ESP as well in Board Manager?

kr0815

Yes, i erased and downloaded everything new 2 days ago

Did you see the other forum post ?

Really strange problem, i´d say i have a fake chip or something, but as it´s working with ESPEasy, i can´t imagine...

In Board manager, i´m using 2.0, should i also go to the developer version ?

hek

Yes, really strange. Just wish I could reproduce. Make things much easier to debug!

I'm using 2.1.0-rc2 of the esp.

kr0815

Could maybe someone upload the compiled binary ? Just to check all possible faults ?
The needed settings are:

With DHCP
SSID Power-LAN
key kr08151020

drock1985

Hi @hek

Thank you again for all the work you and the team do for the MySensors community - maybe we can help back? I read your post, and understand the family and full time job - it's two careers. Maybe if there was a community Wiki that we all could help maintain - this way when things change they are instantly updated?

Just throwing it out there.

kr0815

Hello Hek,

i just saw in the german FHEM Forum, somebody has exactly the same Problems as me - but when switching back to the old / regular version, it works as expected, except the other problem with the long values.
SO it musst be a software thing, nothing hardware related

But as it is really strange you don´t get this problen, did any body else see it ?

hek

If you can reproduce this, It would be helpful if you could start adding debug prints in the library code to locate where it hangs to narrow down things.

Big Wish - a working system including up-to-date Reference

16

11.7k

11.2k

113.0k