Sensebender Micro Case
-
Here is my take on a case for the Sensebender Micro. I left space at the top so it could be adapted for a proxy sensor, etc. These are for my refrigerator and freezer so they don't need to hang.
They still need a little sanding...
Here is my attic sensor w/ a hanging tab:
-
@Ironbar
Nice design! Can you post the files or link to a depository?
-
Cool. I like the stacking of the batteries. Are you using two singe-battery holders in series or were did you find that variant of holder?
Edit: series, not parallel. Words are confusing
-
Sure. Here it is on thingiverse:
http://www.thingiverse.com/thing:1410004
The battery holder is a single holder with two AA batteries. The batteries are ran in series. To be honest, I can't remember where I bought the holders but I like them because they clip on like a 9 volt so you can easily disconnect the battery holder from your project.
Suggested Topics
-
Welcome
Announcements • 23 Mar 2014, 08:24 • hek 2 Apr 2014, 14:39 -
A low cost energy meter
My Project • 25 Jan 2024, 01:03 • OldSurferDude 12 Aug 2024, 06:03 -
Long time test done with soil sensor!
My Project • 7 Jan 2025, 09:13 • Nicklas Starkel 13 Jan 2025, 09:10 -
Auxiliary Loads and Mains Charger Controller for my Smart Mobile Home
My Project • 6 Jan 2024, 13:32 • fsgraz 6 Jan 2024, 13:32 -
Simulate Online-Recreating 'Flappy Bird' with Arduino Nano
My Project • 15 Jan 2025, 09:13 • Skylar Jones 15 Jan 2025, 09:13 -
Water Meter or "How to get Home Assistant to send saved data to an Arduino"
My Project • 18 Oct 2024, 02:19 • OldSurferDude 18 Oct 2024, 02:19