ESP8266 MySensors Gateway stop working after sometime !!!
-
I built a wifi gateway with ESP8266 and connected to my vera edge . then added mysensors and all of devices is correct and working true . but sometime the gateway is failure (without reason!) and I should be to reboot my vera...
after reboot will work again.
but I dont know why my gateway failure sometime !
failure means that my relays and my sensors are on , but there is not any connect to my vera and no report from sensors and no reactions for relays....
I use a static IP for my vera and a static IP for my gateway , also I use a 1A power supply for my gateway. -
@Reza Hi my friend.
I had the same problem. For me adding the capacitor closer to the radio solved it.
-
oh
in site said use a 47µF capacitor ! but I wrong and use 4.7µF . is that my problem ? if I use 47µF will be solve my problem ? -
@Reza I use 4.4 uF works like a charm. Do you power the radio with the large antenna from the Arduino??? Might be worth powering it not directly from the Arduino
@TheoL
I use a NRF24L01+PA+LNA without anntena. and i use a 5V 1A power for nodemcu and radio is connect to nodemcu module.
But i think problem is related to wifi communication .
look at pics ! NRF networks dont have problem , problem related to wifi network !
is my setting correct ?:( pics can not upload now !
so in vera dashborad and devices my gateway is "Can't Detect Device(red)"
so i think related to wifi network . do i change gateway setting? -
One solution - refer to: [https://forum.mysensors.org/topic/3894/esp8266-unexpected-crash-or-reset](link url)
