Problem building MQTT Gateway ver 2.0
-
Hi,
I would like to update my actual MQTT Gateway to the new MySensors 2.0 version library. Unfortunately I wasn´t able to just upload the sketch to another arduino, first it was asking for "DigitalIO.h" which I copied from an older arduino IDE version on my computer to the latest arduino IDE library. But after that it asks for "MySigningNone.h". Don´t know where to find that.
Why can´t it finally be just a simple task to upload code using an updated library?
T:\Programme\Arduino 1.6.10\arduino-builder -dump-prefs -logger=machine -hardware "T:\Programme\Arduino 1.6.10\hardware" -tools "T:\Programme\Arduino 1.6.10\tools-builder" -tools "T:\Programme\Arduino 1.6.10\hardware\tools\avr" -built-in-libraries "T:\Programme\Arduino 1.6.10\libraries" -libraries "T:\Arduino Projekte\libraries" -fqbn=arduino:avr:uno -ide-version=10610 -build-path "C:\Users\Cito\AppData\Local\Temp\build3eff58a7a75746fb3d7ac5b9b27eba4c.tmp" -warnings=none -prefs=build.warn_data_percentage=75 -verbose "T:\Arduino Projekte\MQTTClientGateway_Ver_2.0\MQTTClientGateway_Ver_2.0.ino" T:\Programme\Arduino 1.6.10\arduino-builder -compile -logger=machine -hardware "T:\Programme\Arduino 1.6.10\hardware" -tools "T:\Programme\Arduino 1.6.10\tools-builder" -tools "T:\Programme\Arduino 1.6.10\hardware\tools\avr" -built-in-libraries "T:\Programme\Arduino 1.6.10\libraries" -libraries "T:\Arduino Projekte\libraries" -fqbn=arduino:avr:uno -ide-version=10610 -build-path "C:\Users\Cito\AppData\Local\Temp\build3eff58a7a75746fb3d7ac5b9b27eba4c.tmp" -warnings=none -prefs=build.warn_data_percentage=75 -verbose "T:\Arduino Projekte\MQTTClientGateway_Ver_2.0\MQTTClientGateway_Ver_2.0.ino" Using board 'uno' from platform in folder: T:\Programme\Arduino 1.6.10\hardware\arduino\avr Using core 'arduino' from platform in folder: T:\Programme\Arduino 1.6.10\hardware\arduino\avr Detecting libraries used... "T:\Programme\Arduino 1.6.10\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10610 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IT:\Programme\Arduino 1.6.10\hardware\arduino\avr\cores\arduino" "-IT:\Programme\Arduino 1.6.10\hardware\arduino\avr\variants\standard" "C:\Users\Cito\AppData\Local\Temp\build3eff58a7a75746fb3d7ac5b9b27eba4c.tmp\sketch\MQTTClientGateway_Ver_2.0.ino.cpp" -o "nul" "T:\Programme\Arduino 1.6.10\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10610 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IT:\Programme\Arduino 1.6.10\hardware\arduino\avr\cores\arduino" "-IT:\Programme\Arduino 1.6.10\hardware\arduino\avr\variants\standard" "-IT:\Programme\Arduino 1.6.10\libraries\DigitalIO" "C:\Users\Cito\AppData\Local\Temp\build3eff58a7a75746fb3d7ac5b9b27eba4c.tmp\sketch\MQTTClientGateway_Ver_2.0.ino.cpp" -o "nul" "T:\Programme\Arduino 1.6.10\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10610 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IT:\Programme\Arduino 1.6.10\hardware\arduino\avr\cores\arduino" "-IT:\Programme\Arduino 1.6.10\hardware\arduino\avr\variants\standard" "-IT:\Programme\Arduino 1.6.10\libraries\DigitalIO" "-IT:\Programme\Arduino 1.6.10\hardware\arduino\avr\libraries\SPI\src" "C:\Users\Cito\AppData\Local\Temp\build3eff58a7a75746fb3d7ac5b9b27eba4c.tmp\sketch\MQTTClientGateway_Ver_2.0.ino.cpp" -o "nul" "T:\Programme\Arduino 1.6.10\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10610 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IT:\Programme\Arduino 1.6.10\hardware\arduino\avr\cores\arduino" "-IT:\Programme\Arduino 1.6.10\hardware\arduino\avr\variants\standard" "-IT:\Programme\Arduino 1.6.10\hardware\arduino\avr\libraries\SPI\src" "-IT:\Programme\Arduino 1.6.10\libraries\DigitalIO" "C:\Users\Cito\AppData\Local\Temp\build3eff58a7a75746fb3d7ac5b9b27eba4c.tmp\sketch\MQTTClientGateway_Ver_2.0.ino.cpp" -o "C:\Users\Cito\AppData\Local\Temp\build3eff58a7a75746fb3d7ac5b9b27eba4c.tmp\preproc\ctags_target_for_gcc_minus_e.cpp" T:\Arduino Projekte\MQTTClientGateway_Ver_2.0\MQTTClientGateway_Ver_2.0.ino:80:27: fatal error: MySigningNone.h: No such file or directory #include <MySigningNone.h> ^ compilation terminated. Bibliothek DigitalIO im Ordner: T:\Programme\Arduino 1.6.10\libraries\DigitalIO (legacy) wird verwendet Bibliothek SPI in Version 1.0 im Ordner: T:\Programme\Arduino 1.6.10\hardware\arduino\avr\libraries\SPI wird verwendet exit status 1 Fehler beim Kompilieren für das Board Arduino/Genuino Uno.```
-
@siod There must be something wrong with your installation, as DigitalIO.h is included in the MySensors 2.0.0 release (https://github.com/mysensors/MySensors/tree/development/drivers/AVR/DigitalIO).
Better remove the digitalio library you installed manually and clear any remaining MySensors directories left in the 'libraries' folder.
Furthermore the Arduino 1.6.10 release currently faces some stability issues in combination with MySensors, so I would advise you to stick with 1.6.9, until the issue is solved.
-
Hi Yveaux, thanks for your quick reply. So, I installed Arduino IDE 1.6.9, downloaded Mysensors library 2.0 again and copied it into the libraries folder. Still getting this error:
T:\Programme\arduino-1.6.9\arduino-builder -dump-prefs -logger=machine -hardware "T:\Programme\arduino-1.6.9\hardware" -tools "T:\Programme\arduino-1.6.9\tools-builder" -tools "T:\Programme\arduino-1.6.9\hardware\tools\avr" -built-in-libraries "T:\Programme\arduino-1.6.9\libraries" -libraries "T:\Arduino Projekte\libraries" -fqbn=arduino:avr:uno -ide-version=10609 -build-path "C:\Users\Cito\AppData\Local\Temp\build3eff58a7a75746fb3d7ac5b9b27eba4c.tmp" -warnings=none -prefs=build.warn_data_percentage=75 -verbose "T:\Arduino Projekte\MQTTClientGateway_Ver_2.0\MQTTClientGateway_Ver_2.0.ino" T:\Programme\arduino-1.6.9\arduino-builder -compile -logger=machine -hardware "T:\Programme\arduino-1.6.9\hardware" -tools "T:\Programme\arduino-1.6.9\tools-builder" -tools "T:\Programme\arduino-1.6.9\hardware\tools\avr" -built-in-libraries "T:\Programme\arduino-1.6.9\libraries" -libraries "T:\Arduino Projekte\libraries" -fqbn=arduino:avr:uno -ide-version=10609 -build-path "C:\Users\Cito\AppData\Local\Temp\build3eff58a7a75746fb3d7ac5b9b27eba4c.tmp" -warnings=none -prefs=build.warn_data_percentage=75 -verbose "T:\Arduino Projekte\MQTTClientGateway_Ver_2.0\MQTTClientGateway_Ver_2.0.ino" "T:\Programme\arduino-1.6.9\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10609 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IT:\Programme\arduino-1.6.9\hardware\arduino\avr\cores\arduino" "-IT:\Programme\arduino-1.6.9\hardware\arduino\avr\variants\standard" "C:\Users\Cito\AppData\Local\Temp\build3eff58a7a75746fb3d7ac5b9b27eba4c.tmp\sketch\MQTTClientGateway_Ver_2.0.ino.cpp" -o "nul" "T:\Programme\arduino-1.6.9\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10609 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IT:\Programme\arduino-1.6.9\hardware\arduino\avr\cores\arduino" "-IT:\Programme\arduino-1.6.9\hardware\arduino\avr\variants\standard" "C:\Users\Cito\AppData\Local\Temp\build3eff58a7a75746fb3d7ac5b9b27eba4c.tmp\sketch\MQTTClientGateway_Ver_2.0.ino.cpp" -o "C:\Users\Cito\AppData\Local\Temp\build3eff58a7a75746fb3d7ac5b9b27eba4c.tmp\preproc\ctags_target_for_gcc_minus_e.cpp" T:\Arduino Projekte\MQTTClientGateway_Ver_2.0\MQTTClientGateway_Ver_2.0.ino:77:23: fatal error: DigitalIO.h: No such file or directory #include <DigitalIO.h> ^ compilation terminated. exit status 1 Fehler beim Kompilieren für das Board Arduino/Genuino Uno.```
-
Where did you download the mqtt-gateway ino from? Is it this one:
-
No Sir, I´ve downloaded it from here: https://www.mysensors.org/build/mqtt_gateway
-
Ok, I could upload your posted code, seems to work, but MQTT messages don´t have the same format as before. Why was this changed (e.g. #define MY_MQTT_PUBLISH_TOPIC_PREFIX "mygateway1-out"
#define MY_MQTT_SUBSCRIBE_TOPIC_PREFIX "mygateway1-in")? I don´t want to edit all my controllers code...But I must admit I did not update my sensors yet, but if I cannot easily change the MQTT message format I´ll stick with the older MySensors library.
-
Ok, was experimenting a bit, I guess I have to change my Openhab code...
So this is what I had until now:
Contact FensterSzR "Fenster Rechts" (FF_Sz) {mqtt="<[mysensor:MyMQTT/1/2/V_TRIPPED:state:OPEN:1],<[mysensor:MyMQTT/1/2/V_TRIPPED:state:CLOSED:0]"}Now, with library ver 2.0, I think I have to change it to sth. like this, but it doesn´t work, yet. I hope you can help me here:
Contact FensterKzR "Fenster Rechts" (FF_Kz) {mqtt="<[mysensors-1:mygateway1-out/3/2/V_TRIPPED:state:OPEN:1],<[mysensors-1:mygateway1-out/3/2/V_TRIPPED:state:CLOSED:0]"}edit: oops, now with correct code snippet
edit 2: I recieve this in my serial monitor and mosquitto also receives the messages:
0;255;3;0;9;TSP:MSG:READ 3-3-0 s=2,c=1,t=16,pt=2,l=2,sg=0:0 0;255;3;0;9;Sending message on topic: mygateway1-out/3/2/1/0/16 0;255;3;0;9;TSP:MSG:READ 3-3-0 s=4,c=1,t=0,pt=7,l=5,sg=0:21.2 0;255;3;0;9;Sending message on topic: mygateway1-out/3/4/1/0/0 0;255;3;0;9;TSP:MSG:READ 3-3-0 s=3,c=1,t=1,pt=7,l=5,sg=0:62.5 0;255;3;0;9;Sending message on topic: mygateway1-out/3/3/1/0/1
-
@siod said:
Contact FensterKzR "Fenster Rechts" (FF_Kz) {mqtt="<[mysensors-1:mygateway1-out/3/2/V_TRIPPED:state:OPEN:1],<[mysensors-1:mygateway1-out/3/2/V_TRIPPED:state:CLOSED:0]"}
Can't tell if you fixed this yet but your Contact Item is incorrect. You've stated the topic in the MQTT part as "mygateway1-out/3/2/V_TRIPPED" when it should actually be "mygateway1-out/3/2/1/0/16"
