Ethernet Gateway On Arduino Mega 2056 Issues

[wergeld]

@sundberg84
I had read that. But, to be honest I could not make heads or tails about what the posters said did or did not work. There was no definitive answer on that thread. Some said try pins x/y/z and other said to try a/b/c. Yet, no one said "hey, this actually works". Closest was the comment by spugna85. But, looking at the v2 libraries it was already done (hence me using A0-2 pins).

[sundberg84]

@wergeld - ok, to bad :( give google search a go, it might help you find other threads.
I cant help you more, not a mega user myself. By the way, ethernet gw works great on Uno or Nano as well.

[wergeld]

@sundberg84
Yea, by my UNO is used for templating projects for my slimNode. I am only making the ethernet gateway because the direct-connection of the nrf to the RPi is not yet supporting v2 library. Just seems silly to include extra hardware (uno/mega and ethernet shield) when the RPi has GPIO and the nrf can be connected to it. I am using domoticz on the RPi using serial gateway but only with v1.4.

[FotoFieber]

Try with following defines and wire accordingly:

#define MY_RF24_CE_PIN 40
#define MY_RF24_CS_PIN 53

[wergeld]

@FotoFieber
Builds and still I get the error:

0;255;3;0;9;Starting gateway (RNNGA-, 2.0.0)
0;255;3;0;9;TSM:INIT
0;255;3;0;9;!TSM:RADIO:FAIL
0;255;3;0;9;!TSM:FAILURE
0;255;3;0;9;TSM:PDT

[tlpeter]

I have this error also with a ENC28J60 module.
I have used the 1.6.8/9 and 11 ide but that doesn't matter.
This was on an Nano by the way.

[FotoFieber]

@wergeld
My gateway is based on a mega 2560 with following wiring:

40 CE
51 MOSI
50 MISO
52 SCK
53 CSN

and the defines from above:

#define MY_RF24_CE_PIN 40
#define MY_RF24_CS_PIN 53

Do you have this wiring?

[wergeld]

@FotoFieber, no. As I stated above this is my wiring:

A2 --> MISO
A1 --> MOSI
A0 --> SCK
6 --> CSN
5 --> CE

When I changed CSN/CE to the 2 pins you mentioned above it was and I was still getting this error:

A2 --> MISO
A1 --> MOSI
A0 --> SCK
53 --> CSN
40 --> CE

To use your wiring I would need to modify the rest of the pin definitions in the code, yes?

[korttoma]

Wiring like this does not apply for the Mega 2056

A2 --> MISO
A1 --> MOSI
A0 --> SCK

If you see from here -> https://arduino-info.wikispaces.com/file/view/Mega2-900.jpg/421499040/Mega2-900.jpg

Pinout for Mega 2056:
51 MOSI
50 MISO
52 SCK

You need to change your wiring.

[wergeld]

@korttoma, excellent! I will try this out when I get home from work.

[wergeld]

@korttoma
Success! Got this ethernet gateway up and running! Thank you very much.