Sensor Repeat

[t1m0]

I have found no answer in the forum . therefore a new topic .

I have a gateway in 10m and in 5 meter any sensor . 0m is now a signal triggered .
10m to the gateway can not be reached.
It will then be automatically amplified by sensor standing on 5 meter ????
The meter disclosures are fictive

Thanks for answers

[flopp]

If the sensor is a normal node it will not repeat any sensor data.

You can install a Repeater between the not working sensor and the GW.

[sundberg84]

This post is deleted!

[mfalkvidd]

@t1m0 Which radio are you using? You should get more than 10 meters unless your walls are mean to radio signals. See the range troubleshooting flow diagram at https://forum.mysensors.org/topic/666/debug-faq-and-how-ask-for-help

[t1m0]

the meter pay are only examples !!!
I wanted to know just generally

[t1m0]

@flopp they do!!!!!
i found the answer of my question! :)

image url)

[flopp]

@t1m0
Repeater-sensor-node is a Repeater node
What I meant with Normal node is Sensor node and they don't send others data to GW

Sorry if I was not clear 😉