💬 Power Meter Pulse Sensor

flopp

@Fat-Fly
I think something is wrong in your code.

Is the pulse setup correct?

miljume

Can someone please explain how the sleep mode works?

My sensor works like a charm when sleep mode is "false" but when changing to "true" i get nothing to the GW

Exactly the same setup, the only thing I changed is from "false" to "true"

flopp

@miljume
Use sleep mode if you have battery for the node.

Maybe it need lots of Kwh before sending new data. If you don't use sleep mode it will send watt more often.

miljume

@flopp Yes, that was my intention

But I wonder how often the sensor send data to the gateway in that mode i.e. how the mechanism works

I might not have waited long enough but it would be good to know what "long enough" is

flopp

it need to change 0,02 kWh before sending new value

see more information here
https://forum.mysensors.org/topic/4727/energy-meter-not-sending-at-expected

flopp

This post is deleted!

miljume

@flopp Thanks for the link but I still cant get anything in sleep mode

Now I have waited for over an hour with simulated blinks approx twice/second but so far the device havent reported one single time!

By the way, does anyone know how to reset the value stored in the GW?

After some testing the value get's quite high :smiley:

asgardro

Hi. I built this sensor and loaded the example. It appears the sensor registers with my serial gateway and appears in domoticz. The problem is it hasn't updated the value in 24h? Any ideas?
Thanks

flopp

@asgardro
What does the serial output in arduino says?

asgardro

In the end it displays the watt value and then just hangs. I haven't modified the example at all. I am @ work now but will be able to check again later

asgardro

Came back from work and checked. it is sending to the gateway the first value and gets displayed in domoticz. then dead.. it appears it does not get the pulse count from the gateway respectively from domoticz. has anyone got this working with domoticz?

flopp

@asgardro
I am using two of these to DZ.
One has been working perfect for 1,5 month the second I had some problem with initialize after 3 weeks.

asgardro

would you mind please sharing the sketch? i don't know whats wrong. i even forced it with "bool pcReceived = false" puting it to true. thanks

asgardro

i do not get Serial.print("Received last pulse count from gw:"); in serial output

flopp

@asgardro
this is my sketch
i use MS 1.5.1

/**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 *******************************
 *
 * REVISION HISTORY
 * Version 1.0 - Henrik EKblad
 * 
 * DESCRIPTION
 * This sketch provides an example how to implement a distance sensor using HC-SR04 
 * Use this sensor to measure KWH and Watt of your house meeter
 * You need to set the correct pulsefactor of your meeter (blinks per KWH).
 * The sensor starts by fetching current KWH value from gateway.
 * Reports both KWH and Watt back to gateway.
 *
 * Unfortunately millis() won't increment when the Arduino is in 
 * sleepmode. So we cannot make this sensor sleep if we also want 
 * to calculate/report watt-number.
 * http://www.mysensors.org/build/pulse_power
 */

#include <SPI.h>
#include <MySensor.h>  

#define DIGITAL_INPUT_SENSOR 3  // The digital input you attached your light sensor.  (Only 2 and 3 generates interrupt!)
#define PULSE_FACTOR 1000       // Number of blinks per KWH of your meeter
#define SLEEP_MODE false        // Watt-value can only be reported when sleep mode is false.
#define MAX_WATT 15000          // Max watt value to report. This filters outliers.
#define INTERRUPT DIGITAL_INPUT_SENSOR-2 // Usually the interrupt = pin -2 (on uno/nano anyway)
#define CHILD_ID 1              // Id of the sensor child
unsigned long SEND_FREQUENCY = 5*60000; // Minimum time between send (in milliseconds). We don't want to spam the gateway.
MySensor gw;
double ppwh = ((double)PULSE_FACTOR)/1000; // Pulses per watt hour
boolean pcReceived = false;
volatile unsigned long pulseCount = 0;   
volatile unsigned long lastBlink = 0;
volatile unsigned long watt = 0;
unsigned long oldPulseCount = 0;   
unsigned long oldWatt = 0;
//double oldKwh;
unsigned long lastSend;
MyMessage wattMsg(CHILD_ID,V_WATT);
MyMessage kwhMsg(CHILD_ID,V_KWH);
MyMessage pcMsg(CHILD_ID,V_VAR1);


void setup()  
{  
  gw.begin(incomingMessage);

  // Send the sketch version information to the gateway and Controller
  gw.sendSketchInfo("Energy Huset", "1.1");
//1.1 no check for old value, always send
  // Register this device as power sensor
  gw.present(CHILD_ID, S_POWER);

  // Fetch last known pulse count value from gw
  gw.request(CHILD_ID, V_VAR1);
  
  attachInterrupt(INTERRUPT, onPulse, RISING);
  lastSend=millis();
}


void loop()     
{ 
  gw.process();
  unsigned long now = millis();
  // Only send values at a maximum frequency or woken up from sleep
  bool sendTime = now - lastSend > SEND_FREQUENCY;
  if (pcReceived && (SLEEP_MODE || sendTime)) {
    
    // New watt value has been calculated  
    if (!SLEEP_MODE && watt != oldWatt) {
    
      // Check that we dont get unresonable large watt value. 
      // could hapen when long wraps or false interrupt triggered
      if (watt<((unsigned long)MAX_WATT)) {
      
        gw.send(wattMsg.set(watt));  // Send watt value to gw 
      }  
      Serial.print("Watt:");
      Serial.println(watt);
      oldWatt = watt;
    }
  
    // Pulse cout has changed
    
    if (pulseCount != oldPulseCount) {
    
      gw.send(pcMsg.set(pulseCount));  // Send pulse count value to gw 
      double kwh = ((double)pulseCount/((double)PULSE_FACTOR));     
      oldPulseCount = pulseCount;
      
      //if (kwh != oldKwh) {
        gw.send(kwhMsg.set(kwh, 4));  // Send kwh value to gw 
        //oldKwh = kwh;
      //}
    }    
    lastSend = now;
  } else if (sendTime && !pcReceived) {
    // No count received. Try requesting it again
    gw.request(CHILD_ID, V_VAR1);
    lastSend=now;
  }
  
  if (SLEEP_MODE) {
    gw.sleep(SEND_FREQUENCY);
  }
}

void incomingMessage(const MyMessage &message) {
  if (message.type==V_VAR1) {  
    pulseCount = oldPulseCount = message.getLong();
    Serial.print("Received last pulse count from gw:");
    Serial.println(pulseCount);
    pcReceived = true;
  }
}

void onPulse()     
{ 
  if (!SLEEP_MODE) {
    unsigned long newBlink = micros();  
    unsigned long interval = newBlink-lastBlink;
    if (interval<10000L) { // Sometimes we get interrupt on RISING
      return;
    }
    watt = (3600000000.0 /interval) / ppwh;
    
    lastBlink = newBlink;
  } 
  pulseCount++;
}

asgardro

0 MCO:BGN:INIT NODE,CP=RNNNA--,VER=2.1.0
3 TSM:INIT
4 TSF:WUR:MS=0
11 TSM:INIT:TSP OK
13 TSF:SID:OK,ID=254
14 TSM:FPAR
51 TSF:MSG:SEND,254-254-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
2058 !TSM:FPAR:NO REPLY
2060 TSM:FPAR
2096 TSF:MSG:SEND,254-254-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
2121 TSF:MSG:READ,0-0-254,s=255,c=3,t=8,pt=1,l=1,sg=0:0
2126 TSF:MSG:FPAR OK,ID=0,D=1
4104 TSM:FPAR:OK
4105 TSM:ID
4106 TSM:ID:OK
4108 TSM:UPL
4113 TSF:MSG:SEND,254-254-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1
4123 TSF:MSG:READ,0-0-254,s=255,c=3,t=25,pt=1,l=1,sg=0:1
4128 TSF:MSG:PONG RECV,HP=1
4131 TSM:UPL:OK
4132 TSM:READY:ID=254,PAR=0,DIS=1
4140 TSF:MSG:SEND,254-254-0-0,s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=OK:0100
4164 TSF:MSG:READ,0-0-254,s=255,c=3,t=15,pt=6,l=2,sg=0:0100
4172 TSF:MSG:SEND,254-254-0-0,s=255,c=0,t=17,pt=0,l=5,sg=0,ft=0,st=OK:2.1.0
4183 TSF:MSG:SEND,254-254-0-0,s=255,c=3,t=6,pt=1,l=1,sg=0,ft=0,st=OK:0
4203 TSF:MSG:READ,0-0-254,s=255,c=3,t=6,pt=0,l=1,sg=0:M
4210 TSF:MSG:SEND,254-254-0-0,s=255,c=3,t=11,pt=0,l=12,sg=0,ft=0,st=OK:Energy Meter
4224 TSF:MSG:SEND,254-254-0-0,s=255,c=3,t=12,pt=0,l=3,sg=0,ft=0,st=OK:1.0
4235 TSF:MSG:SEND,254-254-0-0,s=1,c=0,t=13,pt=0,l=0,sg=0,ft=0,st=OK:
4241 MCO:REG:REQ
4246 TSF:MSG:SEND,254-254-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=OK:2
4253 TSF:MSG:READ,0-0-254,s=255,c=3,t=27,pt=1,l=1,sg=0:1
4258 MCO:PIM:NODE REG=1
4260 MCO:BGN:STP
4267 TSF:MSG:SEND,254-254-0-0,s=1,c=2,t=24,pt=0,l=0,sg=0,ft=0,st=OK:
4273 MCO:BGN:INIT OK,TSP=1
4283 TSF:MSG:READ,0-0-254,s=1,c=2,t=24,pt=0,l=1,sg=0:1
Received last pulse count from gw:1

asgardro

here is my serial output. and remains like this.
i have found your sketch but can not seem to get it to work to gw 2.0

asgardro

And this is my log from DZ

2017-01-10 22:00:28.664 MySensors: Node: 254, Sketch Name: Energy Meter
2017-01-10 22:00:28.675 MySensors: Node: 254, Sketch Version: 1.0
2017-01-10 22:00:33.737 (Gate) General/kWh (Meter)
2017-01-10 22:00:33.761 (Gate) General/kWh (Meter)
2017-01-10 22:01:34.631 (Gate) Temp + Humidity (GatewayBed1)
2017-01-10 22:01:37.207 (Gate) Temp (Radio Room)
2017-01-10 22:01:46.109 (Gate) General/Barometer (Pressure)
2017-01-10 22:02:34.570 (Gate) Temp + Humidity (GatewayBed1)
2017-01-10 22:02:34.573 (Gate) Temp + Humidity (GatewayBed1)
2017-01-10 22:03:34.510 (Gate) Temp + Humidity (GatewayBed1)
2017-01-10 22:03:34.513 (Gate) Temp + Humidity (GatewayBed1)
2017-01-10 22:03:50.973 (Gate) Temp (Radio Room)
2017-01-10 22:04:03.239 (Gate) Temp (Outside)
2017-01-10 22:04:03.249 (Gate) General/Barometer (Pressure)

flopp

can you please print your code?

I am not so good to read the Message structure but it look like it present temperature and other stuff

asgardro

Ah the gateway works fine with other sensors
The code for the pulse power meter is the one in the example

💬 Power Meter Pulse Sensor

18

11.7k

11.2k

113.1k