Combine RFlink Gateway instead of building mysensors gateway?

[meanmrgreen]

First off im fresh of the boat and is about to begin my first projects.

I have a few 433mhz switches in the house already and zwave is expensive i went and bought an arduino mega and a 433mhz transmitter/reciver and hooked em up last night.

Using em in domoticz.

The question is.. I have a order of alot of stuff from aliexpress for mysensors projects incomming.
The plan was to build a usb gateway and use it on the same raspberry as my RFlink gateway.

But now i see that the RFlink supports mysensors since oktober 2016?
Does this mean if i add a 2,4ghz trancever on my mega i can controll both my 433mhz AND the mysensors network from it?

Ive tried googleing and searching but i cant get any clear answer.
Anyone with knowlage about this

[meanmrgreen]

Hmmm found out that it only will recieve data not send it.

Oh well, another gateway it is

[hek]

Probably better to build a separate gateway, especially if you later decide to enable signing/encryption which I doubt the RFLink gateway handles.

[ijobain]

Is there any way to connect mysensors gateway to RFlink Gateway board: Rx/Tx or SDA/SCL

How enable: Wire connections (OPTIONAL)

[Marcoblacks]

@ijobain Hi, I am in the same condition: RFlink Gateway ---> Raspberry--->Domoticz, just built a MySensor node (Power Pulse meter using arduino mini pro 3.3v) but it doesn't work using the original sketch.... ia m looking for some fix... or built a new real MySensor Gateway running on Raspberry... Any advise?!
PS: Why RFLink don't use a complete MySensor Gateway (not a just RX GW) ?? It's based on MEGA, it can manage it...!?!

[scalz]

Hi.
like posted posted above, better use a true Mysensors gw.
Someone can correct me if i'm wrong, but i don't think RFLink (traffic sniffer??) run the true Mysensors serial gw sketch, nor can use signing feature.
I've no rflink so i'm not exactly sure how it works in software, i just took a look a while ago at the code.

[gohan]

I think it's not worth spending time on a half working solution when there is a working one that's very cheap