RFM69 range issues

[scalz]

mainly inspired from Lowpowerlab at the beginning.
But now it looks like other Mysensors radio drivers. for harmonization, and better support.
So, the base flow implementation for instance, is from tekka (structure, and spi handling).
It should be faster, and memory efficient compared to the old one (lowpowerlab version) which was c++ etc..
Compilation with all features (atc, listenmode) takes now less memory than with the previous lowpowerlab version. Even with some nice addition from tekka like a version number+sequence number in the header.
And, marceloagno is also checking the linux part.
etc..
Also, regarding tx times, we still use packetmode with automatic sequencer if this is what you're talking.
for a door contact switch, depending of its purpose, signing (and so ack) may be needed to have "security" and reliable delivery packet.
As it's rf, i'm trying to find a way to have this reliable delivery by adding a random delay (optional feature) before talking. the Listen Before Talk to avoid for instance to have two node waiting for free channel and startng to send at send time..not often implemented in libs though.

[mihai.aldea]

Souds great. I took a short pause because believe it or not, I was back to square one with the issues. A couple of days and one Adafruit Feather RFM69 plus one Sparkfun RFM69HCW breakout board later I still have no conclusion to what leads to the problems, at first I thought of bypassing the MySensor's directive and call the RFM69 drivers directly. It worked until it didn't, with no explanation whatsoever.
So I started from a couple of sketches I knew worked and slowly build up the correct configuration that's now working (partly but more on that in a separate topic). The most useful debug tool was an RTL-SDR stick so I could actually hear the nodes whisper :grin:
So, it appears that in order to use the 433/868/915 W/HW modules with MySensors, it's best to add theses at the top of your sketches:

// Select the RFM69 radio type
#define MY_RADIO_RFM69
// Enter your model's frequency
#define MY_RFM69_FREQUENCY RF69_433MHZ
// If you're using RFM69HW / RFM69HCW modules, they won't work until this is set.
// Leave it commented for the normal power modules.
#define MY_IS_RFM69HW
// Your network ID
#define MY_RFM69_NETWORKID 100

The library is pretty much preconfigured for RF24 so using the RFM69 modules is possible but with a bit of trial and error until all things are set.

[scalz]

sure! you have to set all your defines for your node. before the mysensors include.
for the possible defines you can take a look at docs
https://www.mysensors.org/download/sensor_api_20
i also have an rtl-sdr. can be useful. cool :)

[DavidZH]

I find it very strange you experience these kind of problems. I have been using the RFM69 (both W and HW) since I started with MySensors a year ago.
The only time I had trouble with the range (or any transmission at all..) was when I used double sided perf-board to build my circuits on. Somehow the extra exposed copper reflects the RF energy in an unpredictable way so the radio will not send at all.

Can you post a picture of your setup? Maybe we spot a tiny little thing that eff's up your testing.

[mihai.aldea]

I believe this one is on me. It wasn't clear to me that MySensors is actually wrapper of the original LowPowerLab's RFM69 lib and you can't mix #define's from MySensors and the embedded RFM69 driver.
MySensors is really plug&play if you're using the NRF24L01+ modules, follow the guides, upload the sketches and fire up the gateway, but if you want to use RFM69, I at least, needed some serious trial and error.
Maybe it's just my hectic style of trying new setups, or maybe because I found no concise guide on how to switch from RF24 to RFM69 or maybe something in between :yum:

[mfalkvidd]

@mihai.aldea great that you got it working. I believe many people would find such a guide useful. Would it be possible for you to summarize your experience? That summary could then be the base for a guide that we can add to the MySensors documentation.

[mihai.aldea]

@mfalkvidd I will definitely do that. I'll tinker with them for a while just to be confortable with stating the facts and I will compile such a guide. It'll take me no more than a couple of days.

[mfalkvidd]

@mihai.aldea great!

[maman]

I configure the ESP8266 MQTT gateway using RFM69HW.

I define as follows

#define MY_RADIO_RFM69
#define MY_RFM69_FREQUENCY RF69_433MHZ
#define MY_IS_RFM69HW
#define MY_RFM69_NETWORKID 100
#define RF69_IRQ_PIN 4
#define RF69_SPI_CS 15
#define MY_RF69_IRQ_PIN RF69_IRQ_PIN
#define MY_RF69_SPI_CS RF69_SPI_CS

For node side, I use Promini ATMEGA328
#define MY_NODE_ID 7
#define MY_PARENT_NODE_ID 0
#define MY_RADIO_RFM69
#define MY_RFM69_FREQUENCY RF69_433MHZ
#define MY_IS_RFM69HW
#define MY_RFM69_NETWORKID 100
#define RF69_IRQ_PIN 2
#define RF69_SPI_CS 10
#define MY_RF69_IRQ_PIN RF69_IRQ_PIN
#define MY_RF69_SPI_CS RF69_SPI_CS

But, the node (Promini) can not communicate with the gateway

1487370 !TSM:FPAR:NO REPLY
1487372 TSM:FPAR
1487503 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
1489510 !TSM:FPAR:NO REPLY
1489512 TSM:FPAR
1489643 TSF:MSG:SEND,7-7-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
1491650 !TSM:FPAR:FAIL
1491652 TSM:FAIL:CNT=7
1491654 TSM:FAIL:PDT

Is there any hint to do ?

[Yeitso]

@maman Try to downgrade to 2.0.0 if you are using any newer lib.
The newer libs over 2.0.0 does not work for my esp8266 mqtt gateway either.

[maman]

@Yeitso Thanks, I will try to downgrade the mysensors library.

Can you share the #define script that working on ATMEGA328 and ESP8266 board ?

Thanks for your help.

Regards,
Maman

[manutremo]

Hi @executivul ,

You mentioned in your post that the length of the antenna must be tuned to the circuit - would you mind sharing the process to do the tuning?

Thanks!

[Chester]

@manutremo said in RFM69 range issues:

Hi @executivul ,
You mentioned in your post that the length of the antenna must be tuned to the circuit - would you mind sharing the process to do the tuning?

https://www.mysensors.org/build/connect_radio

Down near the bottom of the page is the lengths of antenna needed for the three primary frequencies used by the RFM board.

[manutremo]

@Chester

I've seen that page, thanks. If you read the post I'm referring to, @executivul used some specific procedure to tune the antenna further than just using the theoretical length.