Sensebender Gateway with W5100 trouble



  • Hi all,

    I have the Sensebender Gateway working fine with the default serial sketch.
    However, as soon as I load, the W5100 ethernet default sketch, I cannot get it to work. There are no messages in the terminal. The only way to force messages in the terminal is to take out the nrf24l01+ , connect the GW to the computer and insert the nrf24l01+ into the socket while running the terminal. I have the following message:

    0;255;3;0;9;TSM:FAIL:RE-INIT
    0;255;3;0;9;TSM:INIT
    0;255;3;0;9;!TSM:INIT:TSP FAIL
    0;255;3;0;9;TSM:FAIL:CNT=2
    0;255;3;0;9;TSM:FAIL:PDT
    0;255;3;0;9;TSM:FAIL:RE-INIT
    0;255;3;0;9;TSM:INIT
    0;255;3;0;9;TSM:INIT:TSP OK
    0;255;3;0;9;TSM:INIT:GW MODE
    0;255;3;0;9;TSM:READY:ID=0,PAR=0,DIS=0
    0;255;3;0;9;MCO:REG:NOT NEEDED
    IP: 0.0.0.0
    0;255;3;0;9;MCO:BGN:STP
    0;255;3;0;9;MCO:BGN:INIT OK,TSP=1
    

    This is very strange as I set IP to 10.1.1.120.
    When I connect the ethernet cable, I can ping 10.1.1.120, but the GW does not work

    Can anyone help please?


  • Mod

    Sorry if I ask, but what pins did you use to connect the W5100 and the nrf24 radio?



  • @gohan

    There is only one 10 pins socket - this is for W5100
    0_1494433385299_IMG_4962.PNG


Log in to reply
 

Looks like your connection to MySensors Forum was lost, please wait while we try to reconnect.