Problem with Domoticz

[arduino_89_89]

I understand, but the only sensors that connect are: The temperature sensor and the gas sensor, which send periodic signals. My system is structured on 3 floors. The first floor has the Gateway, and off the first floor has a Node Repeater. Then the second floor has another Node Repeater and has 2 Relay Nodes. And finally the Third Floor with another repeater and 2 sensors, Gas and Temp / Hum.

[gohan]

Without the serial logs of when you are experiencing the problem, it is kind of impossible to help.

[arduino_89_89]

But should I use watchdog? To reset nodes automatically every day?

[gohan]

That is a workaround, it is not a solution. You need to debug the issue and find the root cause. Also posting the logs can be helpful for us to help

[arduino_89_89]

How do I send it to you? It's too long.

[gohan]

Just paste it here using a different "insert code block" tag for each log, also try to cleanup the logs so they are not hundreds of lines each.

[arduino_89_89]

It's too long.

[arduino_89_89]

0_1502269526374_Log.txt

[arduino_89_89]

0_1502270247458_Log.txt

[pjr]

@arduino_89_89 said in Problem with Domoticz:

Hi everyone, I wanted to know how ever whenever the PC reboots, I also change the com port. And why when I break the gateway, are the sensors no longer connected?

What environment? Could this help? https://www.domoticz.com/wiki/Assign_fixed_device_name_to_USB_port