Assistance on sensor project
-
I am new to the whole sensor family, however I have to build gas sensors(about 2) in a network for gas leakage detection. I will like to know the full components to buy urgently. Thank you
-
Besides the obvious 2 gas sensors, I'd say a RPI3 (for controller and gateway), 2 arduino pro mini 3.3V for the sensors or 2 Nano (since I guess you will have the sensors not battery powered), some assorted capacitors, 3 NRF24 radio modules (maybe you could get a shielded NRF24 PA LNA for the gateway), personally I like these modules but it is up to you if you have other voltage regulators.
-
Besides the obvious 2 gas sensors, I'd say a RPI3 (for controller and gateway), 2 arduino pro mini 3.3V for the sensors or 2 Nano (since I guess you will have the sensors not battery powered), some assorted capacitors, 3 NRF24 radio modules (maybe you could get a shielded NRF24 PA LNA for the gateway), personally I like these modules but it is up to you if you have other voltage regulators.
@gohan thanks a lot
-
While you are at it, get some extra parts too, just in case you fry something since in the beginning it is not that hard.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login