3. First MySensors project with hard start :-)

First MySensors project with hard start :-)

  • MrRose

    Hey together,

    I try my first MySensors Project with two Nodemcu´s and NRF24 radios.

    The first Nodemcu working as gateway with a additional NRF24 radio (wired by the manual, sketsh GatewayESP8266 ). And shows after boot the following.

    ⸮-S⸮⸮40 MCO:BGN:INIT GW,CP=RNNGE---,VER=2.2.0
83 TSF:LRT:OK
98 TSM:INIT
111 TSF:WUR:MS=0
135 TSM:INIT:TSP OK
155 TSM:INIT:GW MODE
scandone
state: 0 -> 2 (b0)
state: 2 -> 3 (0)
state: 3 -> 5 (10)
add 0
aid 2
cnt 

connected with MyWlan, channel 1
dhcp client start...
ip:192.168.7.35,mask:255.255.255.0,gw:192.168.7.1
380 TSM:READY:ID=0,PAR=0,DIS=0
412 MCO:REG:NOT NEEDED
scandone
937 GWT:TIN:CONNECTING...
964 GWT:TIN:IP=192.168.7.35
993 MCO:BGN:STP
1010 MCO:BGN:INIT OK,TSP=1

    The second Nodemcu uses the same NRF24 radio with a simple sketsh BinarySwitchSleepSensor shows the following serial Log:

    57 MCO:BGN:INIT NODE,CP=RNNNE---,VER=2.2.0
72 TSM:INIT
73 TSF:WUR:MS=0
80 TSM:INIT:TSP OK
82 TSF:SID:OK,ID=2
84 TSM:FPAR
2329 TSF:MSG:SEND,2-2-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
4336 !TSM:FPAR:NO REPLY
scandone
no Sevelen found, reconnect after 1s
4342 TSM:FPAR

Soft WDT reset

ctx: cont 
sp: 3ffef720 end: 3ffefa90 offset: 01b0

>>>stack>>>
3ffef8d0:  40106870 00000000 3ffefb68 40106969  
3ffef8e0:  00000000 3ffefb68 00000000 40202486  
3ffef8f0:  001e8480 3ffe0001 3ffefaf3 402024e6  
3ffef900:  00000000 0000000e 00000000 000000ff  
3ffef910:  00000000 00000000 000000ff 00000030  
3ffef920:  00000000 0000ef8e 0000000e 402025a1  
3ffef930:  00000000 3ffefaec 00000000 40202668  
3ffef940:  00000007 52415046 3ffe000a 40204850  
3ffef950:  3ffefb3c 40237470 3ffefd74 000000ff  
3ffef960:  3ffefb3c 3ffefb38 3ffefaec 40203037  
3ffef970:  000a594c 3fffc6fc 00000001 00000000  
3ffef980:  3ffefb68 3ffefb3c 0000004a 00000030  
3ffef990:  00000000 3ffefb3c 0000004a 00000030  
3ffef9a0:  00000002 00000002 000000ff 00000017  
3ffef9b0:  00000000 3ffefb68 3ffef9e0 3ffef9d0  
3ffef9c0:  00000004 00000000 3ffefb68 40106969  
3ffef9d0:  00000000 00000020 00000011 0000004a  
3ffef9e0:  3ffefb3c 000000ff 3ffefb3c 40203157  
3ffef9f0:  00000001 00000000 3ffefb3c 40203310  
3ffefa00:  0000001d 00000000 00000000 402029ed  
3ffefa10:  3ffefb3c 00000000 3ffefb3c 40202abc  
3ffefa20:  00029cc0 00000000 00000000 40202bd9  
3ffefa30:  00000525 00a61ac0 00000000 40203d25  
3ffefa40:  3fffdad0 3ffefae8 00000000 40203ee3  
3ffefa50:  600000ff ff000000 3ffefd54 3ffeea68  
3ffefa60:  3fffdad0 3ffefae8 3ffefd54 40203fa8  
3ffefa70:  feefeffe 00000000 3ffeea18 4020416c  
3ffefa80:  feefeffe feefeffe 3ffeea70 40100108  
<<<stack<<<

 ets Jan  8 2013,rst cause:2, boot mode:(3,6)

load 0x4010f000, len 1384, room 16 
tail 8
chksum 0x2d
csum 0x2d
v4ceabea9
~ld

    To me looks not like the GW get any connection to the second node. Due to i put to each radio the explained capacitor (100uF)

    As Controller i try FHEM and Domoticz both connect to the gw without problems.

    But the result is the same. Any ideas?

    Thanks for your help.

    0 mfalkvidd 1 Reply
  • mfalkvidd
    Mod

    Hi @mrrose, welcome to the forum!

    Yes all nrf24 radios need capacitor for stable operation.

    Could you post the gateway log from where the (second) node boots up and asks for parent?

    0
  • MrRose

    Hi

    each nrf24 has as 100uF capacitor.

    The log did at the GW did not change during the ask for parent. In remains on the posted log.

    0 mfalkvidd 1 Reply
  • mfalkvidd
    Mod

    @mrrose interesting. Could there be another MySensors gateway within range? Maybe a neighbor?

    Edit: I am asking because st=OK means that a node has acknowledged that it did receive the message.

    0
  • MrRose

    Ok that will be a good idea in that case a change the nrf24 channel inside the myConfig.h will change the situation right?

    0 mfalkvidd 1 Reply
  • mfalkvidd
    Mod

    @mrrose yes that's the easiest way. Remember to re-upload sketches to both nodes after the change.

    0
  • MrRose

    This post is deleted!
    0
  • MrRose

    Channel now: 83

    Gw:

    ⸮⸮⸮=C⸮⸮40 MCO:BGN:INIT GW,CP=RNNGE---,VER=2.2.0
83 TSF:LRT:OK
97 TSM:INIT
110 TSF:WUR:MS=0
134 TSM:INIT:TSP OK
155 TSM:INIT:GW MODE
scandone
state: 0 -> 2 (b0)
state: 2 -> 3 (0)
state: 3 -> 5 (10)
add 0
aid 2
cnt 
262 TSM:READY:ID=0,PAR=0,DIS=0
295 MCO:REG:NOT NEEDED
scandone
819 GWT:TIN:CONNECTING...

connected with SevelenKeller, channel 1
dhcp client start...
ip:192.168.7.35,mask:255.255.255.0,gw:192.168.7.1
1346 GWT:TIN:CONNECTING...
1374 GWT:TIN:IP=192.168.7.35
1405 MCO:BGN:STP
1422 MCO:BGN:INIT OK,TSP=1
2014 GWT:TSA:C=0,CONNECTED
3006 GWT:RFC:C=0,MSG=0;0;3;0;2;
3041 GWT:RFC:C=0,MSG=0;0;3;0;2;Get Version
3086 GWT:RFC:C=0,MSG=0;0;3;0;18;PING
pm open,type:2 0
13056 GWT:RFC:C=0,MSG=0;0;3;0;18;PING
23091 GWT:RFC:C=0,MSG=0;0;3;0;18;PING
33126 GWT:RFC:C=0,MSG=0;0;3;0;18;PING
43059 GWT:RFC:C=0,MSG=0;0;3;0;18;PING
53097 GWT:RFC:C=0,MSG=0;0;3;0;18;PING
63129 GWT:RFC:C=0,MSG=0;0;3;0;18;PING

    Node:

    __  __       ____
|  \/  |_   _/ ___|  ___ _ __  ___  ___  _ __ ___
| |\/| | | | \___ \ / _ \ `_ \/ __|/ _ \| `__/ __|
| |  | | |_| |___| |  __/ | | \__ \  _  | |  \__ \
|_|  |_|\__, |____/ \___|_| |_|___/\___/|_|  |___/
        |___/                      2.2.0

51 MCO:BGN:INIT NODE,CP=RNNNE---,VER=2.2.0
66 TSM:INIT
67 TSF:WUR:MS=0
75 TSM:INIT:TSP OK
77 TSF:SID:OK,ID=2
78 TSM:FPAR
2323 TSF:MSG:SEND,2-2-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
scandone
state: 0 -> 2 (b0)
state: 2 -> 0 (2)
reconnect
scandone
no Sevelen found, reconnect after 1s
reconnect
4333 !TSM:FPAR:NO REPLY
4335 TSM:FPAR

Soft WDT reset

ctx: cont 
sp: 3ffef710 end: 3ffefa90 offset: 01b0

>>>stack>>>
3ffef8c0:  00000000 3ffefb68 3ffefb68 402046c3  
3ffef8d0:  40106870 00000000 3ffefb68 40106969  
3ffef8e0:  00000000 3ffefb68 00000000 402024e6  
3ffef8f0:  001e8480 3ffe0001 3ffefaf3 402024e6  
3ffef900:  00000000 0000000e 00000000 000000ff  
3ffef910:  00000000 00000000 000000ff 00000030  
3ffef920:  00000000 0000efd6 0000000e 402025a1  
3ffef930:  00000000 3ffefaec 00000000 40202668  
3ffef940:  00000007 52415046 3ffe000a 40204850  
3ffef950:  3ffefb3c 40237470 3ffefd74 000000ff  
3ffef960:  3ffefb3c 3ffefb38 3ffefaec 40203037  
3ffef970:  000a594c 3fffc6fc 00000001 00000000  
3ffef980:  3ffefb68 3ffefb3c 00000045 00000030  
3ffef990:  00000000 3ffefb3c 00000045 00000030  
3ffef9a0:  00000002 00000002 000000ff 00000017  
3ffef9b0:  00000000 3ffefb68 3ffef9e0 3ffef9d0  
3ffef9c0:  00000004 00000000 3ffefb68 40106969  
3ffef9d0:  00000000 00000020 00000011 00000045  
3ffef9e0:  3ffefb3c 000000ff 3ffefb3c 40203157  
3ffef9f0:  00000001 00000000 3ffefb3c 40203310  
3ffefa00:  000003f9 00000000 00000000 402029ed  
3ffefa10:  3ffefb3c 00000000 3ffefb3c 40202abc  
3ffefa20:  00029cc0 00000000 00000000 40202bd9  
3ffefa30:  00000750 00a61ac0 00000000 40203d25  
3ffefa40:  3fffdad0 3ffefae8 00000000 40203ee3  
3ffefa50:  600000ff ff000000 3ffefd54 3ffeea68  
3ffefa60:  3fffdad0 3ffefae8 3ffefd54 40203fa8  
3ffefa70:  feefeffe 00000000 3ffeea18 4020416c  
3ffefa80:  feefeffe feefeffe 3ffeea70 40100108  
<<<stack<<<

 ets Jan  8 2013,rst cause:2, boot mode:(3,6)

load 0x4010f000, len 1384, room 16 
tail 8
chksum 0x2d
csum 0x2d
v4ceabea9
~ld

    GW Log did not change by power on the node. Only now i get Ping again and again.

    0
Log in to reply
 

Suggested Topics

  • hek


    Announcements •  

    3
  • adds666


    Troubleshooting •  

    3
  • Oumuamua


    Troubleshooting •  

    2
  • ncollins


    Troubleshooting •  

    24
  • eiten


    Troubleshooting •  

    2
  • OldSurferDude


    Troubleshooting •  

    2

0
Online

11.2k
Users

11.1k
Topics

112.5k
Posts



Copyright 2019 Sensnology   |   Forum Guidelines   |   Privacy Policy   |   Terms of Service