💬 Unnamed project
-
Have you found an inexpensive source for the Atmega 328p-mu? So far, the cheapest I've found is:
https://www.ebay.com/itm/10pcs-ATMEGA328P-MU-MEGA328P-MU-QFN-32/292431653458?hash=item441648ea52:g:D2QAAOSwmuVacfep -
-
@berkseo Thanks! I just ordered it to test how easy/hard it is to solder. If I can manage that, then I may switch over to it.
@neverdie said in 💬 MyS Duino:
@berkseo Thanks! I just ordered it to test how easy/hard it is to solder. If I can manage that, then I may switch over to it.
0.45mm pitch, it will be a pain to hand solder and the big ground pad at the bottom is out of reach, get a stencil.
-
It is not difficult. A solder paste and a solder dryer will help you. The chip is fixed on the board with a clip, so that it does not blow away. I soldered the chip for a self-made board. It was hard to do the tracks. On a good industrial board, it will simply be a pleasure to solder. :)
-
@neverdie said in 💬 MyS Duino:
@berkseo Thanks! I just ordered it to test how easy/hard it is to solder. If I can manage that, then I may switch over to it.
0.45mm pitch, it will be a pain to hand solder and the big ground pad at the bottom is out of reach, get a stencil.
@nca78 said in 💬 MyS Duino:
0.45mm pitch, it will be a pain to hand solder and the big ground pad at the bottom is out of reach, get a stencil.
soldering paste and soldering dryer :) It's very simple :)
-
@nca78 said in 💬 MyS Duino:
0.45mm pitch, it will be a pain to hand solder and the big ground pad at the bottom is out of reach, get a stencil.
soldering paste and soldering dryer :) It's very simple :)
-
@nca78 said in 💬 MyS Duino:
0.45mm pitch, it will be a pain to hand solder and the big ground pad at the bottom is out of reach, get a stencil.
soldering paste and soldering dryer :) It's very simple :)
@berkseo said in 💬 MyS Duino:
@nca78 said in 💬 MyS Duino:
0.45mm pitch, it will be a pain to hand solder and the big ground pad at the bottom is out of reach, get a stencil.
soldering paste and soldering dryer :) It's very simple :)
No stencil?
-
@berkseo said in 💬 MyS Duino:
@nca78 said in 💬 MyS Duino:
0.45mm pitch, it will be a pain to hand solder and the big ground pad at the bottom is out of reach, get a stencil.
soldering paste and soldering dryer :) It's very simple :)
No stencil?
@neverdie said in 💬 MyS Duino:
No stencil?
will add later ...PCB manufacturing process
https://www.youtube.com/watch?v=8tg0u7rf7Xg
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login