💬 Unnamed project
-
-
Have you found an inexpensive source for the Atmega 328p-mu? So far, the cheapest I've found is:
https://www.ebay.com/itm/10pcs-ATMEGA328P-MU-MEGA328P-MU-QFN-32/292431653458?hash=item441648ea52:g:D2QAAOSwmuVacfep -
-
@berkseo Thanks! I just ordered it to test how easy/hard it is to solder. If I can manage that, then I may switch over to it.
@neverdie said in 💬 MyS Duino:
@berkseo Thanks! I just ordered it to test how easy/hard it is to solder. If I can manage that, then I may switch over to it.
0.45mm pitch, it will be a pain to hand solder and the big ground pad at the bottom is out of reach, get a stencil.
-
It is not difficult. A solder paste and a solder dryer will help you. The chip is fixed on the board with a clip, so that it does not blow away. I soldered the chip for a self-made board. It was hard to do the tracks. On a good industrial board, it will simply be a pleasure to solder. :)
-
@neverdie said in 💬 MyS Duino:
@berkseo Thanks! I just ordered it to test how easy/hard it is to solder. If I can manage that, then I may switch over to it.
0.45mm pitch, it will be a pain to hand solder and the big ground pad at the bottom is out of reach, get a stencil.
@nca78 said in 💬 MyS Duino:
0.45mm pitch, it will be a pain to hand solder and the big ground pad at the bottom is out of reach, get a stencil.
soldering paste and soldering dryer :) It's very simple :)
-
@nca78 said in 💬 MyS Duino:
0.45mm pitch, it will be a pain to hand solder and the big ground pad at the bottom is out of reach, get a stencil.
soldering paste and soldering dryer :) It's very simple :)
-
@nca78 said in 💬 MyS Duino:
0.45mm pitch, it will be a pain to hand solder and the big ground pad at the bottom is out of reach, get a stencil.
soldering paste and soldering dryer :) It's very simple :)
@berkseo said in 💬 MyS Duino:
@nca78 said in 💬 MyS Duino:
0.45mm pitch, it will be a pain to hand solder and the big ground pad at the bottom is out of reach, get a stencil.
soldering paste and soldering dryer :) It's very simple :)
No stencil?
-
@berkseo said in 💬 MyS Duino:
@nca78 said in 💬 MyS Duino:
0.45mm pitch, it will be a pain to hand solder and the big ground pad at the bottom is out of reach, get a stencil.
soldering paste and soldering dryer :) It's very simple :)
No stencil?
@neverdie said in 💬 MyS Duino:
No stencil?
will add later ...PCB manufacturing process
https://www.youtube.com/watch?v=8tg0u7rf7Xg
