Custom made ethernet gateway based on atmega128

[RJ_Make]

@axillent Would you happen to have links?

[axillent]

@ServiceXp sure

M3 & M2

http://ru.aliexpress.com/item/M3-x-10-Insert-round-nuts-Brass-Rohs-PASS-1000-pieces/745448307.html?recommendVersion=1
http://ru.aliexpress.com/item/M2-x-3-5-x-5-Insert-round-nuts-Brass-Rohs-PASS-1000-pieces/745540578.html?recommendVersion=1

[RJ_Make]

@axillent Thanks..

[DanielD]

hey axillent,

Could you upload the source code of your gateway?
You use another slave that?(Type of This gateway send a RF to anther module and control de lamp?)
If Yes could you post the schema and de souce code?
Thx

[axillent]

@DanielD sorry, did not get your question
my gateways are using standard ethernet gateway sketch

[DanielD]

Hmm, you use the ethernet gateway sketch:),

Okay,I will do the question again, because it was a bit confusing.

This getway control another things? For exemple "Smart Plug" Module?
If yes, how you control this Plug?

Thx

[axillent]

@DanielD my gateways are not doing other things for now

i have two issues with my gateways 1. it is hard to manage multi-gateway network, you need to use hardcode 2. NRF24 is not the single network I plan to integrate to mysensors

there is an idea to redo class structure of the MS library to create a simple way of embedding drivers other than NRF24
as soon as this will be developed we can do a new driver for RF433

the idea on how to integrate RF433 is simple, bud without class restructuring it will be a deep hardcode

[DanielD]

Okay, I understand
Sorry my silliness, but what do you mean hardcore 2?
I will do this sketch today(Ethernet Getway), but my big problem will do sync the getway to this sensor(Plug) or another sensor and control via web/cellphone
:/

[DanielD]

This post is deleted!

[DanielD]

@axillent
You modified the code base, alright?
Could you send me the new code?
Thx

[axillent]

@DanielD 2 is stands for the second issue )

before class restructure I will recommend you to use sensor sketch as a gate between RF433 and mysensors

[DanielD]

@axillent
Okay, I will try :)
The sketch of the Plug, I will see that do many challenges, but let's go.
I was reading the code the Ethernet getway, but i learn how i sync it with another sensor.

Thx for your help