HASS.IO not doing anything
-
Hello I have loaded Hass.IO for raspberry Pi 2 and it boots showing the Logo but nothing else ever happens. I go to the webpage it says it should load , http://hassio.local:8123 but it never connects. I know the raspberry Pi works because I ran raspierian on it before I put sd card in and booted from Hass.io.
Any help
Thank You -
you should wait about 10-20min to first time to setup all... after that try http://local_ip_addres_here:8123 and it should be working..
than you need to add mysensors as component, look here: https://www.home-assistant.io/components/mysensors/ -
I can suggest you to try and flash version prior to v0.67 with "etcher" (That's what I flashed and then updated to V0.67 so can't tell you if there is an issue with v0.67) and wait for about 20 min after booting it up from the sd card (for installation). But before that, did you try to ping the address of the hassio to see if it's connected to the same net ? to see if you can access it at all... start with "ping hassio" in the cmd and see if it has a reply
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login