Problem with sketch IRSender/Receiver (A/C control)
-
Hello everyone,
I'm trying to control with HA my A / C just to turn on and off. For this I am using the sketch of mysensors about IRSender / Receiver.
I'm starting in this wonderful world, but I've been stuck with this error for several days: Not a valid message: value must be either 0 or 1 for dictionary value @ data ['payload']
I show you an image where it is collected:
- on the screen top left, mysgwd
- on the screen at the top right, IDE Arduino
- on the screen below to the left, HA log
- on the screen below to the right, serial monitor
The code is exactly the same as the sketch. I hope to receive your advice and be able to realize this objective.
Greetings and thank you!
-
Hello everyone,
I'm trying to control with HA my A / C just to turn on and off. For this I am using the sketch of mysensors about IRSender / Receiver.
I'm starting in this wonderful world, but I've been stuck with this error for several days: Not a valid message: value must be either 0 or 1 for dictionary value @ data ['payload']
I show you an image where it is collected:
- on the screen top left, mysgwd
- on the screen at the top right, IDE Arduino
- on the screen below to the left, HA log
- on the screen below to the right, serial monitorThe code is exactly the same as the sketch. I hope to receive your advice and be able to realize this objective.
Greetings and thank you!
-
Hello everyone,
I'm trying to control with HA my A / C just to turn on and off. For this I am using the sketch of mysensors about IRSender / Receiver.
I'm starting in this wonderful world, but I've been stuck with this error for several days: Not a valid message: value must be either 0 or 1 for dictionary value @ data ['payload']
I show you an image where it is collected:
- on the screen top left, mysgwd
- on the screen at the top right, IDE Arduino
- on the screen below to the left, HA log
- on the screen below to the right, serial monitorThe code is exactly the same as the sketch. I hope to receive your advice and be able to realize this objective.
Greetings and thank you!
V_IR_RECORD isn't yet supported by home assistant.
-
V_IR_RECORD isn't yet supported by home assistant.
@martinhjelmare Oh it's true, I've tried it with V_IR_SEND and it worked. Thank you.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login