Blink on nodeMCU / RFM69 gateway
-
My gateway works fine with the vanilla wiring as per RFM69/95 & ESP8266 at https://www.mysensors.org/build/connect_radio and the example GatewayESP8266MQTTClient sketch.
I have tried adding the Radio Traffic LEDs as per https://www.mysensors.org/build/advanced_gateway but whichever available pins I use:
D2 / D3 / D4 : leds blink but comms to nodes seem to fail with NOACK
D9 / D10 : seems to work but lose serial output for debug.I expect someone has made this work before - what am I doing wrong?
Thanks
Richard
-
@rmh same here
-
In the default wiring, D1 is the only unused pin that is easy to work with.
D2 is used for CE so using it to blink a led as well will not work.
1 out of 3
Suggested Topics
-
NRF24L01 and rfm69 in one gateway
General Discussion • 29 Dec 2016, 10:32 • Omemanti 29 Dec 2016, 14:46 -
Changing setIndication behavior
Development • 28 Jun 2017, 09:10 • robosensor 28 Jun 2017, 09:10 -
Double watermeter on NodeMCU
My Project • 5 Jun 2018, 13:38 • marsault6 5 Jun 2018, 13:38 -
How do I push Notification within Arduino IDE sketch?
My Project • 2 Dec 2018, 16:50 • Goddur 2 Dec 2018, 22:19 -
Over the air updates
General Discussion • 23 Mar 2014, 21:38 • ToSa 1 Mar 2015, 11:21 -
Node-red msg queue form Controller to Gateway over MQTT
Development • 16 Sept 2020, 07:43 • alexelite 16 Sept 2020, 07:43 -
💬 Central MA-02
OpenHardware.io • 1 Feb 2017, 12:47 • openhardware.io 1 Feb 2017, 12:47