Nodo 485



  • this is the message sent by the well known Arduino 2009 :
    TSF: MSG: SEND, 9-9-255-255, s = 255, c = 3, t = 7, pt = 0, l = 0, sg = 0, ft = 0, v = OK:
    this is the message sent by the well known Arduino micro ;
    TSF: MSG: SEND, 255-255-255-255, s = 255, c = 3, t = 7, pt = 0, l = 0, sg = 0, ft = 0, v = OK:
    the program is the same for the two cards
    how does this happen?


  • Mod

    @bocmau that's a strange format of the debug log. Where does it come from? The log parser is unable to understand it.

    Could you post the rest of the logs? Just a single line without context is quite hard to make sense from.



  • @mfalkvidd said in Nodo 485:

    that's a strange format of the debug log. Where does it come from? The log parser is unable to understand it.
    Could you post the rest of the logs? Just a single line without context is quite hard to make sense from.

    Thanks I solved in 485 the registration does not work
    We must add #define MY_NODE_ID XX


  • Mod

    @bocmau that's very strange. Which controller are you using?


 

522
Online

7.9k
Users

8.7k
Topics

93.6k
Posts