I need some help regarding repeaters SOLVED!
5546dug last edited by 5546dug
So the question is , I have my minipro o/s with a humidity sensor and using the standard radio, but cannot receive signal i/s home. I have enough parts to build a repeater and install it adjacent to the o/s sensor in hopes of bouncing the signal. I have not found the required info on the learning pages of My Sensors, and so need to ask the form once again what needs to be done . Guessing it needs a sketch and anything else. what would this sketch be called ?
Think I found the answer in the ardunio library , once again under my sensors must have bad eyes.
I have set up the repeater node called repeater 2
I wish to have o/s humidity sensor 3 which cant see the gw to report to repeater 2.
Using the my sensors repeater sketch on lib 1.4 ver 1.4
Not getting any action from anything.
If I look in the work area of repeater it indicates it is clearing childs is there a step or steps missing do I need to input more info into repeater on humidity sensor here are sceenshots
just needed to make the repeater node the mother( or reporting to node ) in the humidity parmeters . In my case, change the node from a 0 to a 2. simple!