I would also like to know if this is doable on the the Domoticz platform as well

@awi @Sparkman

Thanks guys, will implement these and see how it goes

@5546dug @hek

Thanks guys. Will jump in and see what happens.

Hi all,

Just wondering if it is OK to have two gateways running within range of each other. I have a home system running, but want to build a system for a friend and do the testing at home. That means I will have two gateways (and their nodes) within range of each other when doing the test and build.

I would imagine both gateways will pickup all nodes. Would this cause confusion in the systems?

Thanks for the advice

@jkandasa as discussed on chat, but thought I would put the info her as well.

Using one of the 4 USB ports on the PI.

Versions

Linux raspberrypi 4.1.6-v7+ #810 SMP PREEMPT Tue Aug 18 15:32:12 BST 2015 armv7l GNU/Linux

@jkandasa I do have an AMA0, but it does not work on that one either. The gateway is definitely connected to ACM0. Which is the one it works on when I have Domoticz connected up.

Something odd is happening with the PI USB side of things. Tried switching to another port but no luck there either.

As a side, I installed on windows and it works fine, so I know the gateway is OK, but I really want it running on the PI at some point

@jkandasa Checked my settings and they were already set as per that article, so I don't believe that is the trouble I am facing. From the logs I sent you, anything else you think could be causing the issue. Was the port being opened OK in the system?

@jkandasa OK thanks

At least I am not going crazy

@davidbd Thanks for the reply.

Yep, can connect to the port and see the node / gateway data in the line.

Still nothing though in the Mycontroller

All my settings seem pretty standard, so not sure what the issue would be or what to check next.

#========================================================================
# MySensors Gateway settings
# Select Type of gateway will be used, Only one gateway will be used
# Types -> serial, ethernet, mqtt
#========================================================================
mcc.ethernet.gateway.type=serial

#========================================================================
# MySensors Serial port settings
# In this section select: Driver, port name and baud rate
# Available drivers -> [pi4j, jssc, jserialcomm, auto]
#========================================================================
mcc.serialport.driver.type=auto
mcc.serialport.name=/dev/ttyACM0
mcc.serialport.baud.rate=115200

#========================================================================
# MySensors Ethernet Gateway settings
# Update host name/ip and port number, Default: 192.168.178.6:5003
# Keep alive check frequency in seconds
#========================================================================
mcc.ethernet.gateway.host=192.168.178.6
mcc.ethernet.gateway.port=5003
mcc.ethernet.gateway.keep.alive.frequency=60

#========================================================================
# MySensors MQTT Gateway settings
# Update broker host name/ip and port number, Default: 192.168.178.6:1883
# Root topic name of broker
# Note: MQTT_TRANSLATE_TYPES will be not supported
# Disable MQTT_TRANSLATE_TYPES in your MQTT gateway
#========================================================================
mcc.mqtt.gateway.broker.host=192.168.178.6
mcc.mqtt.gateway.broker.port=1883
mcc.mqtt.gateway.broker.root.topic=MyMQTT

#========================================================================
# Database
# Where do you want to keep your database.
# It is highly recommended  to take a backup of this db on upgrade. 
# Database: H2DB, location and name, example:/tmp/mycontroller
#========================================================================
mcc.h2db.location=../conf/mycontroller

#========================================================================
# Web files, will be located under ../www by default
# For web used angularjs
#========================================================================
www.file.location=../www/

#========================================================================
# Web Application server configuration
# bind.address - interface to bind. 0.0.0.0 - all available interfaces
# You can use either http or https, enable.https - https is enabled
# if https is enabled specify keystore file details
# It is highly recommended to use https also change default keystore file
#========================================================================
bind.address=0.0.0.0
enable.https=true
http.port=8443
ssl.keystore.file=../conf/keystore.jks
ssl.keystore.password=password
ssl.keystore.type=JKS

#logger configuration - logback.xml

@jkandasa Thanks

Have now done all that. Stopped the Domoticz server, started Mycontroller. I get the webpage up now, but still no nodes showing up and for some reason nothing is being written to my logs the past few hours at all.

What can I look at?

@jkandasa Thanks for that.

The latest Java version has go me going as far as server access goes, but I am having issues opening the serial port it seems.

I am trying to run in parallel with Domoticz, but I maybe having an issue trying to access the same port I am guess.

Suggestions on how to get around that?

2015-09-27 15:45:16,568 ERROR [main] [org.mycontroller.standalone.gateway.serialport.SerialPortPi4jImpl:68] Failed to load serial port,
java.io.IOException: Unable to open the serial port/device. (Error #2)
        at com.pi4j.jni.Serial.open(Native Method) ~[mycontroller-standalone-0.0.2-alpha4-single.jar:na]
        at com.pi4j.io.serial.impl.SerialImpl.open(SerialImpl.java:151) ~[mycontroller-standalone-0.0.2-alpha4-single.jar:na]
        at com.pi4j.io.serial.impl.SerialImpl.open(SerialImpl.java:242) ~[mycontroller-standalone-0.0.2-alpha4-single.jar:na]
        at org.mycontroller.standalone.gateway.serialport.SerialPortPi4jImpl.initialize(SerialPortPi4jImpl.java:61) [mycontroller-standalone-0.0.2-alpha4-single.jar:na]
        at org.mycontroller.standalone.gateway.serialport.SerialPortPi4jImpl.<init>(SerialPortPi4jImpl.java:40) [mycontroller-standalone-0.0.2-alpha4-single.jar:na]
        at org.mycontroller.standalone.StartApp.startServices(StartApp.java:217) [mycontroller-standalone-0.0.2-alpha4-single.jar:na]
        at org.mycontroller.standalone.StartApp.main(StartApp.java:78) [mycontroller-standalone-0.0.2-alpha4-single.jar:na]
2015-09-27 15:45:16,646 INFO [main] [org.mycontroller.standalone.db.TimerUtils:144] Updated Time:[SunRise:Sun Sep 27 10:36:00 AEST 2015, SunSet:Sun Sep 27 22:41:00 AEST 2015], City:[latitude:11.2333, longit$
[Sun Sep 27 15:45:21 AEST 2015] TJWS httpd 0.0.0.0 - [SSL: ServerSocket[addr=0.0.0.0/0.0.0.0,localport=8443]] is listening.