Topics created by frencho

@tekka unbelievable !!! I tried with NRF24 and arduino nano, it's working like a charm !!! If I use the same sketch, on a pro mini using one of my ftdi as serial interface the Tx don't go threw anymore !!! Ftdi use a 1047 chip Arduino nano use a CH340 for which I had to install a Chinese driver for it !?!? !!!!

I have not solved it yet.

@hek Thanks hek, it was indeed the problem. Now I connected the gateway to the Jeedom box, and on the node side I get this : Starting sensor (RRNNA-, 2.0.0) TSM:INIT TSM:RADIO:OK TSP:ASSIGNID:OK (ID=165) TSM:FPAR TSP:MSG:SEND 165-165-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: TSP:MSG:READ 0-0-165 s=255,c=3,t=8,pt=1,l=1,sg=0:0 TSP:MSG:FPAR RES (ID=0, dist=0) TSP:MSG:PAR OK (ID=0, dist=1) TSM:FPAR:OK TSM:ID TSM:CHKID:OK (ID=165) TSM:UPL TSP:PING:SEND (dest=0) TSP:MSG:SEND 165-165-0-0 s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=ok:1 TSP:MSG:READ 0-0-165 s=255,c=3,t=25,pt=1,l=1,sg=0:1 TSP:MSG:PONG RECV (hops=1) TSP:CHKUPL:OK TSM:UPL:OK TSM:READY TSP:MSG:SEND 165-165-0-0 s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=ok:0100 !TSP:MSG:SEND 165-165-0-0 s=255,c=0,t=17,pt=0,l=5,sg=0,ft=0,st=fail:2.0.0 TSP:MSG:SEND 165-165-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,ft=1,st=ok:0 TSP:MSG:SEND 165-165-0-0 s=255,c=3,t=11,pt=0,l=18,sg=0,ft=0,st=ok:Temperature Sensor TSP:MSG:SEND 165-165-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,ft=0,st=ok:1.1 TSP:MSG:SEND 165-165-0-0 s=0,c=0,t=6,pt=0,l=0,sg=0,ft=0,st=ok: Request registration... TSP:MSG:SEND 165-165-0-0 s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=ok:2 TSP:MSG:READ 0-0-165 s=255,c=3,t=27,pt=1,l=1,sg=0:1 Node registration=1 Init complete, id=165, parent=0, distance=1, registration=1 TSP:MSG:SEND 165-165-0-0 s=0,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=ok:22.5 I see the gateway led blinking so its receiving the messages but the jeedom box doesn't recognize the node. !TSP:MSG:SEND 165-165-0-0 s=255,c=0,t=17,pt=0,l=5,sg=0,ft=0,st=fail:2.0.0 I can't understand what this st=fail means, and if it can be the root of my problem ? any idea please