okay thank you for your help,
i'm trying an other way to run mysensors, i'll post a fix when it works.

the result of lsmod :

Module                  Size  Used by
spidev                  6217  12 
spi_sun7i              17802  0 
mali_drm                2608  0 
drm                   209226  1 mali_drm
mali                  111427  0 
ump                    52415  1 mali

I'll try the second SPI bus but it seems be the good bus.
After add spi-sun7i in /etc/modules, what i'm supposed to do ? reboot ? just try to run PiGateway ?

To enable SPI, I run :

sudo modprobe spi-sun7i

sudo raspi-config

I got :

FATAL: Module spi-bcm2708 not found

But when I check in /dev/ SPI seems enabled

ls /dev/spi*
/dev/spidev0.0  /dev/spidev0.1

Now, when I execute PiGatewaySerial, I have a "check wires" message. But it can still be the drivers, or maybe I plugged the NRF on the wrong SPI port ?

@Jan-Gatzke said:

I think the problem is, that the banana pi uses another cpu and needs another spi driver. As the Raspberry master seems to compile against the broadcom driver there will be no easy fix for this.

Agreed ! But if I do :

sudo raspi-config

It should work ... but here, there is an error :

FATAL: Module spi-bcm2708 not found.

Now, I merged these files : https://github.com/LeMaker/bcm2835_BP with mysensors Lib and it partially works. I can compile but PiGateway doesn't work ...
Nobody used a Banana Pi with mySensors before ?

Hi !

I'm here because I have some problems with my Banana Pi.

I downloaded the Zip file on : https://github.com/mysensors/Raspberry
Read the README file and do the following step :

sudo apt-get update
sudo apt-get upgrade

raspi-config

and then enabled SPI module.
At the end of the config, an error appeared

FATAL: Module spi-bcm2708 not found.

I ignored this error and tried to build librf24-bcm.

cd Raspberry-Master/librf24-bcm
make all

the result is

g++ -Wall -fPIC -Ofast -mfpu=vfp -mfloat-abi=hard -mtune=arm1176jzf-s -march=armv6zk -D BCM2835_PERI_BASE=0x -c RF24.cpp
gcc -Wall -fPIC -Ofast -mfpu=vfp -mfloat-abi=hard -mtune=arm1176jzf-s -march=armv6zk -D BCM2835_PERI_BASE=0x -c bcm2835.c
bcm2835.c: In function ‘bcm2835_init’:
bcm2835.c:1207:28: error: invalid suffix "x" on integer constant
bcm2835.c:1208:28: error: invalid suffix "x" on integer constant
bcm2835.c:1209:28: error: invalid suffix "x" on integer constant
bcm2835.c:1210:28: error: invalid suffix "x" on integer constant
bcm2835.c:1211:28: error: invalid suffix "x" on integer constant
bcm2835.c:1212:28: error: invalid suffix "x" on integer constant
bcm2835.c:1213:28: error: invalid suffix "x" on integer constant
bcm2835.c:1214:28: error: invalid suffix "x" on integer constant
bcm2835.c:1228:83: error: invalid suffix "x" on integer constant
bcm2835.c:1232:81: error: invalid suffix "x" on integer constant
bcm2835.c:1236:81: error: invalid suffix "x" on integer constant
bcm2835.c:1239:83: error: invalid suffix "x" on integer constant
bcm2835.c:1242:83: error: invalid suffix "x" on integer constant
bcm2835.c:1246:83: error: invalid suffix "x" on integer constant
bcm2835.c:1249:83: error: invalid suffix "x" on integer constant
bcm2835.c:1253:79: error: invalid suffix "x" on integer constant
Makefile:52: recipe for target 'bcm2835.o' failed
make: *** [bcm2835.o] Error 1

someone has an idea ?