What will need:

1. Any arduino board with flashed serial gateway sketch (in my situation is arduino mega 2560)
2. Radio module NRF24L01+
3. Radio module Bluetooth SPP HC-05
4. Some wire
5. Some free time
6. Good mood)

What will do:

1. Configure Bluetooth SPP HC-05 in AT mode on 115200 bps (AT+UART=115200,0,0). If you want set unique passrord (AT+PSWD=1234), and Name (AT+NAME=BluetoothGateway)
2. Connect bluetooth and nrf24L01+ like on picture (or analogic on your arduino board)
3. Search on PC new bluetooth device (pc make new virtual COM port)
4. Connect from your program to this COM port and enjoy serial gateway wihout wires)

That's all)

This method may be solution for situation of bad usb-serial driver, or uncompatible usb-serial hardware, or problem driver in Linux systems, android systems, ios, macOs and other situation. Now i work on fix serial gateway sketch to may reflash arduino without connect to USB (trout this module HC-05). When i finished - post here.

you welcome) i live in Belarus, our upload speed 512kb)) it take some time)

download from here:

https://drive.google.com/drive/folders/0BxvqyJLoduGbbWdPUk80UXBMdnM?usp=sharing

total weight 4,2

reloaded Generic USB SD Reader 1.00_inc_b1_s2_v1 , Generic USB SD Reader 1.00_inc_b1_s3_v1 lastest version(Generic USB SD Reader 1.00_inc_b1_s3_v1)will be working!

@Planer said:

on true, in dropbox have b1_s1_v1 b1_s2_v1 and b1_s3_v1.tib archuves , no1 it will be downloaded firstly, but has 3 another, wait some time i reload its, where uploaded i have some trouble

on true, in dropbox have b1_s1_v1 b1_s2_v1 and b1_s3_v1.tib archuves , no1 it will be downloaded firstly, but has 3 another, wait some time i reload its

wait for image files

you welcome) i live in Belarus, our upload speed 512kb)) it take some time)

hi, already work on pi2, all works fine, i saved rom via acronis software, if it like so, download from my stuff (some late)

What will need:

1. Any arduino board with flashed serial gateway sketch (in my situation is arduino mega 2560)
2. Radio module NRF24L01+
3. Radio module Bluetooth SPP HC-05
4. Some wire
5. Some free time
6. Good mood)

What will do:

1. Configure Bluetooth SPP HC-05 in AT mode on 115200 bps (AT+UART=115200,0,0). If you want set unique passrord (AT+PSWD=1234), and Name (AT+NAME=BluetoothGateway)
2. Connect bluetooth and nrf24L01+ like on picture (or analogic on your arduino board)
3. Search on PC new bluetooth device (pc make new virtual COM port)
4. Connect from your program to this COM port and enjoy serial gateway wihout wires)

That's all)

This method may be solution for situation of bad usb-serial driver, or uncompatible usb-serial hardware, or problem driver in Linux systems, android systems, ios, macOs and other situation. Now i work on fix serial gateway sketch to may reflash arduino without connect to USB (trout this module HC-05). When i finished - post here.