Raspberry Gateway
-
@skywatch He mentioned using the 'standard ethernet version', so he's not using a serial device as the gateway. This means it's a bit more complicated.
-
I plan to set up a Raspberry Gateway (as standard ethernet version).
Since I do use different Gateways, on different frequencies, I like to know, if there is a way to configure the channel on the Gateway.
I use the NRF24 Radio.@alru use
--my-rf24-channel=<0-125> RF channel for the sensor net. [76]See https://www.mysensors.org/build/raspberry#configure and https://www.mysensors.org/apidocs/group__RaspberryPiGateway.html for detailed documentation.
-
@alru use
--my-rf24-channel=<0-125> RF channel for the sensor net. [76]See https://www.mysensors.org/build/raspberry#configure and https://www.mysensors.org/apidocs/group__RaspberryPiGateway.html for detailed documentation.
@mfalkvidd Thank you, this should be the solution I'm locking for.
Meanwhile I found the config-description...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login