IRQ D2 connection of NRF24L01+
-
Some sketches here on the forum use D2 as an input.
Acording to http://www.mysensors.org/build/connect_radio this port is used by the NR24L01+.
And according to https://arduino-info.wikispaces.com/Nrf24L01-2.4GHz-HowTo, the connection of the IRQ pin is not needed by most software.
Which leads to the question: is this connection really used by mysensors?
-
No D2/IRQ functionality is currently not used by the MySensors library. So you can safely use the pin for something else if you want. But I'd still like to have it connected in the guides for future needs.
-
Some sketches here on the forum use D2 as an input.
Acording to http://www.mysensors.org/build/connect_radio this port is used by the NR24L01+.
And according to https://arduino-info.wikispaces.com/Nrf24L01-2.4GHz-HowTo, the connection of the IRQ pin is not needed by most software.
Which leads to the question: is this connection really used by mysensors?
@FotoFieber said in IRQ D2 connection of NRF24L01+:
is this connection really used by mysensors?
It is not used by default. It is possible to use it. There have not been any changes regarding this in MySensors so far.
-
@FotoFieber said in IRQ D2 connection of NRF24L01+:
is this connection really used by mysensors?
It is not used by default. It is possible to use it. There have not been any changes regarding this in MySensors so far.
@mfalkvidd Thanks - you are on fire today (that was quick reply)! ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login