Arduino NRF24L01 simple universal board
-
Is there somewhere on seeedstudio where I can order some? looks nice! Or is there other similar mini and radios integrated products?
-
@shabba i have a similar integrated product much smaller in size. You may message me if you are interested!
@vikasjee said:
i have a similar integrated product much smaller in size. You may message me if you are interested!
Could you please give some more information and share the design files?
This is your first post here on the forum and we will be extra picky on you to keep spam out. If you want to promote a product we will require it to be open hardware and you should contact info@mysensors.org for further instructions.
-
@shabba also have a look at http://www.mysensors.org/hardware/
-
@vikasjee said:
i have a similar integrated product much smaller in size. You may message me if you are interested!
Could you please give some more information and share the design files?
This is your first post here on the forum and we will be extra picky on you to keep spam out. If you want to promote a product we will require it to be open hardware and you should contact info@mysensors.org for further instructions.
@hek said:
@vikasjee said:
i have a similar integrated product much smaller in size. You may message me if you are interested!
Could you please give some more information and share the design files?
This is your first post here on the forum and we will be extra picky on you to keep spam out. If you want to promote a product we will require it to be open hardware and you should contact info@mysensors.org for further instructions.
Sure! Am sorry didnt know about that. Will contact info@mysensors.org for instructions.
-
There is a trick.
Arduino pro mini you can always pull out and replace prereproshit. For example, you can take out and do it with low power consumption and frequency of 1 MHz.For me it is important that the board did not have anything extra. Everything else is a module connects to the motherboard.
Here are photos of how I put together in a box:
![2015-02-23%2B21.36.23[1].jpg](/uploads/upload-360c6b81-2681-4d08-ba14-51db78c17b5d.jpg)
-
There is a trick.
Arduino pro mini you can always pull out and replace prereproshit. For example, you can take out and do it with low power consumption and frequency of 1 MHz.For me it is important that the board did not have anything extra. Everything else is a module connects to the motherboard.
Here are photos of how I put together in a box:
-
Have you noticed any range reduction or orientation sensitivity from putting the antenna over a PCB plane?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login