pimatic-mysensors controller plugin

[ricardot]

I manually installed the pimatic-mysensors, seems it works, but I'm receiving this message:

13:46:47.360 [pimatic] Cannot find module 'bluebird'

Later I added two devices, a PIR and a relay-switch, and I'm receiving this message:

13:46:49.289 [pimatic] no plugin found for device "Switch" of class "MySensorsSwitch"!
13:46:49.305 [pimatic] no plugin found for device "PIR" of class "MySensorsPIR"!

[Dheeraj]

@ricardot said:

atic] Cannot find module 'bluebird'

Later I added two devices, a PIR and a relay-switch, and I'm receiving this message:

13:46:49.289 [pimatic] no plugin found for device "Switch" of class "MySensorsSwitch"!
13:46:49.305 [pimatic] no plugin found for device "PIR" of

give me sometime will fix this issue.

[Dheeraj]

@ricardot

I have fixed the issues, plugin published to public npm registry . now i think it should work perfectly

[ricardot]

@Dheeraj

It worked now, but I had to change the ttyUSB0 to ttyACM0. I'm using the uno for the gateway.

[ricardot]

Dheeraj,

When we can expect more variables available to mysensors plugin? I miss a simple on off switch.

Thanks!

[Dheeraj]

@ricardot
contact/door/light mysensor add to list.. just check :)

[gogomartin]

@Dheeraj

This is my first try at getting MySensors to work.

I've connected a SerialGateway to the Pi, and configured a DHT22 sensor. But no values are recorded.

Logs from the pi:

<- I_LOG_MESSAGE 0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
<- I_ID_REQUEST 255;255;3;0;3;
<- I_LOG_MESSAGE 0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
<- I_ID_REQUEST 255;255;3;0;3;

Serial output from the sensor:

req node id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,st=ok:
T: 22.70
req node id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,st=ok:
H: 31.10
req node id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,st=ok:
H: 31.00

What can I be doing wrong? Seems like the sensor is requesting a node ID but not getting any?

Thank you for any kind of response!

Regards, Martin

[Dheeraj]

@gogomartin

Currently mysensors plugin only support static node id. Try configuring static node id in sensor code. Hint.. Gw. Begin (null, node id)

Let me know if it's works

[ricardot]

Dheeraj,

Good work!

Is possible to send sensor battery level info?

[Dheeraj]

@ricardot

battery sensor visualization is WIP..

[Ralf H]

hey,
I really like your plugin now that I finally managed to get everything working. :)
But I would also like to use a BH1750 Light sensor with your plugin. I made a sensorbox with PIR to switch on lights for a minute when movement is detected, but I only want to switch on light when it's dark enough. Is it planned to add support for this?

[Dheeraj]

This post is deleted!

[Dheeraj]

@ricardot added support for battery level stats 0.8.9

[Dheeraj]

@Ralf-H sure will add support for light sensor

[Vladut Grecu]

I would like to help you make a color picker for rgb leds and a slider for random pwm outputs :D
-edit-

deviceClasses = [
        MySensorsDHT
        MySensorsBMP
        MySensorsPIR
        MySensorsSwitch
        MySensorsPulseMeter
        MySensorsButton
        MySensorBattery
        MySensorsDevDimmer
      ]

and

 class MySensorsDevDimmer extends env.devices.DimmerActuator

    constructor: (@config,lastState, @board) ->
      @id = config.id
      @name = config.name
      @_state = lastState?.state?.value
      env.logger.info "MySensorsDevDimmer" , @id , @name, @_state

      @board.on('rfValue', (result) =>
        if result.sender is @config.nodeid and result.type is
        V_LIGHT and result.sensor is @config.sensorid
          state = (if parseInt(result.value) is 1 then on else off)
          env.logger.info "<- MySensorDevDimmer " , result
          @_setState(state)
        )
      super()

    changeStateTo: (state) ->
      assert state is on or state is off
      if state is true then _state = 1  else _state = 0
      datas = {}
      datas =
      {
        "destination": @config.nodeid,
        "sensor": @config.sensorid,
        "type"  : V_LIGHT,
        "value" : _state,
        "ack"   : 1
      }
      @board._rfWrite(datas).then ( () =>
        @_setState(state)
      )

But i get :
Could not initialize the plugin "mysensors": MySensorsDevDimmer is not defined

I know that this won`t actually work because of the :

 state = (if parseInt(result.value) is 1 then on else off) 

and the :

  if state is true then _state = 1  else _state = 0

What I don't get is why does it throw me that error. (Don't go hard on me, I just learned the basics of coffee script only for this)

[Dheeraj]

@Vladut-Grecu said:

if state is true then _state = 1 else

check the pimatic-daemon.log file and what kind of error exception your are getting . not sure if you have enable the "logLevel": "debug", in config.json for pimatic.

Also, you need to add entry in device-config-schema.coffee schema file.
if nothing works share the log file with me..

I'm also new to coffee or nodejs and struggled a lot understanding the coffee script , basically, still in learning phase..

[Sebastien Vayrette-Gavard]

@Dheeraj, I have been looking all day for how to configure static node id , meanwhile I heard of mysensors last night so pardon me if I didn't find the doc that explain it. Can you point me in the right direction?

[Sebastien Vayrette-Gavard]

I didn't search enough, http://forum.mysensors.org/topic/753/static-node-id-and-other-unanswered-questions

[Dheeraj]

@Sebastien-Vayrette-Gavard said:

I didn't find the doc that explain it. Can you point me in the right di
follow the below instruction

for pimatic installation:
http://www.pimatic.org/guide/getting-started/installation/

plugin instruction:
https://github.com/DheerajKhajuria/pimatic-mysensors

[jurasek]

Hello, I am new with controler. I already have some temperature sensors and other controls, but until now I did not use any controller,
I am not familiar with linux, and I need help with instalation of controler on raspbery 2.
I am done with OS instalation, I am using image NOOBS.
I try to install Pimatic acording this procedure, http://pimatic.org/guide/getting-started/installation/
And now I am not sure what next.
Please can anybody help me?
Thanks