S_RAIN

[BulldogLowell]

it glitches out the UI and I can't seem to get it working.

if I uncomment out the S_RAIN I get the attached.

Comment it out, and the rest present fine

#include <Sleep_n0m1.h>
#include <SPI.h>
#include <EEPROM.h>  
#include <DallasTemperature.h>
#include <OneWire.h>
#include <RF24.h>
#include <Sensor.h>  

#define ONE_WIRE_BUS 3 // Pin where dallase sensor is connected 
#define MAX_ATTACHED_DS18B20 16
unsigned long SLEEP_TIME = 30; // Sleep time between reads (in seconds)

OneWire oneWire(ONE_WIRE_BUS);
DallasTemperature sensors(&oneWire);
Sensor gw;
Sleep sleep;
float lastTemperature[MAX_ATTACHED_DS18B20];
int numSensors=0;
boolean metric; 
float rainLevel = 0.25;
float tempSensor = 72.5;
float pressure = 10000;
float humidity = 50;

void setup()  
{ 
  sensors.begin();
  gw.begin(); 
  gw.sendSketchInfo("Rain Guage", "0.9a"); 
  gw.sendSensorPresentation(0, S_TEMP);
  //gw.sendSensorPresentation(1, S_RAIN);
  gw.sendSensorPresentation(2, S_BARO);
  gw.sendSensorPresentation(3, S_HUM);
  gw.sendSensorPresentation(4, S_MOTION);
  metric = gw.isMetricSystem();
  
  delay(2000);
  gw.sendVariable(0, V_TEMP, tempSensor,1);
  //gw.sendVariable(1, V_RAIN, ".25");
  gw.sendVariable(2, V_PRESSURE, "11000");
  gw.sendVariable(3, V_HUM, "45");
  gw.sendVariable(4, V_TRIPPED, 1);
  
}

void loop()     
{ 
}

[Yveaux]

@BulldogLowell I don't have any Vera experience, but could it have something to do with the value you sent for V_RAIN? Maybe try 0.25 or an integer value and see what happens.

[BulldogLowell]

@Yveaux

thanks, it doesn't present right even of I don't send it a value (i.e. comment out the gwsendVariable)

[hek]

You are the first to use these devices. Fragments of the MySensors Versa plugin came from from the RFXtrx-plugin (especially the list of devices).

What happens if you upload the device-files from here?
http://code.mios.com/trac/mios_rfxtrx/browser/trunk

[BulldogLowell]

@hek said:

You are the first to use these devices. Fragments of the MySensors Versa plugin came from from the RFXtrx-plugin (especially the list of devices).

What happens if you upload the device-files from here?
http://code.mios.com/trac/mios_rfxtrx/browser/trunk

that makes sense, you need the device vera-side.

I tried that and it did the same thing.

Where is the connection between the device(vera) and the S_RAIN variable in the sketch? Is it in the library files? at the gateway?

[hek]

The connection is actually made in MySenosrs Vera plugin file:
https://github.com/mysensors/Vera/blob/master/L_Arduino.lua#L81

And this describes how it should be displayed:
http://code.mios.com/trac/mios_rfxtrx/browser/trunk/D_RainSensor1.json

[BulldogLowell]

@hek

perhaps there is a problem with the json or xml file on lolodomo's last edit?

I can check with him in the vera forum...

[BulldogLowell]

@BulldogLowell said:

@hek

perhaps there is a problem with the json or xml file on lolodomo's last edit?

I can check with him in the vera forum...

I tried other sensor types which I had not had on Vera before and cannot seem to get any of them to work/display (e.g. S_WIND).

I must be missing a file vera-side, no?

[hek]

Could be. Anything in vera log?

[BulldogLowell]

@hek

Can you create a RAIN device?

the log is here. Note that Lua restarts over and over.

I confirmed with lolodomo that I need all three files D_RainSensor1.xml D_RainSensor1.json and S_RainSensor1.xml, which I installed.

19655 root 0 Z [GetNetworkState]
19674 root 1676 R ps axf
03 06/08/14 7:37:00.955 LuaUPNP: starting bLogUPnP 0 <0x2ac9f000>
02 06/08/14 7:37:00.975 JobHandler_LuaUPnP::Run: pid 14768 didn't exit <0x2ac9f000>
02 06/08/14 7:37:01.168 UserData::LoadUserData previous: 0 from 1.5.622 <0x2ac9f000>
09 06/08/14 7:37:01.169 UserData::ParseRooms 1 Exterior <0x2ac9f000>
09 06/08/14 7:37:01.169 UserData::ParseRooms 2 Living Room <0x2ac9f000>
09 06/08/14 7:37:01.169 UserData::ParseRooms 3 Family Room <0x2ac9f000>
09 06/08/14 7:37:01.170 UserData::ParseRooms 4 PlayRoom <0x2ac9f000>
09 06/08/14 7:37:01.170 UserData::ParseRooms 5 Dining Room <0x2ac9f000>
09 06/08/14 7:37:01.170 UserData::ParseRooms 6 Hallway <0x2ac9f000>
03 06/08/14 7:37:01.247 UserData::LoadUserData BuildVersion: 1.5.622 SvnVersion: 7546 Model: 33 MiCasaVerde VeraLite flush: 0 changed: 0 resync: 9227 syncdevice:0 <0x2ac9f000>
01 06/08/14 7:37:01.582 Device_LuaUPnP::LoadDeviceDoc ixmlParseBufferEx /etc/cmh-ludl//D_RainSensor1.xml size 15875 ret 106 <0x2ac9f000>
01 06/08/14 7:37:01.583 JobHandler_LuaUPnP::CreateDevice_LuaUPnP failed to load 79/D_RainSensor1.xml so device 16 is offline <0x2ac9f000>
01 06/08/14 7:37:02.010 Device_LuaUPnP::CreateServices Aborting device 16 because the topmost device has no interface <0x2ac9f000>
01 06/08/14 7:37:02.010 JobHandler_LuaUPnP::CreateAllServices failed to create 16 <0x2ac9f000>
01 06/08/14 7:37:02.055 Device_LuaUPnP::CreateServices Aborting device 48 because the topmost device has no interface <0x2ac9f000>
01 06/08/14 7:37:02.056 JobHandler_LuaUPnP::CreateAllServices failed to create 48 <0x2ac9f000>
01 06/08/14 7:37:02.056 Device_LuaUPnP::CreateServices Aborting device 49 because the topmost device has no interface <0x2ac9f000>
01 06/08/14 7:37:02.056 JobHandler_LuaUPnP::CreateAllServices failed to create 49 <0x2ac9f000>
01 06/08/14 7:37:02.056 Device_LuaUPnP::CreateServices Aborting device 50 because the topmost device has no interface <0x2ac9f000>
01 06/08/14 7:37:02.056 JobHandler_LuaUPnP::CreateAllServices failed to create 50 <0x2ac9f000>
01 06/08/14 7:37:02.057 Device_LuaUPnP::CreateServices Aborting device 51 because the topmost device has no interface <0x2ac9f000>
01 06/08/14 7:37:02.057 JobHandler_LuaUPnP::CreateAllServices failed to create 51 <0x2ac9f000>
01 06/08/14 7:37:02.057 Device_LuaUPnP::CreateServices Aborting device 52 because the topmost device has no interface <0x2ac9f000>
01 06/08/14 7:37:02.057 JobHandler_LuaUPnP::CreateAllServices failed to create 52 <0x2ac9f000>
01 06/08/14 7:37:02.057 Device_LuaUPnP::CreateServices Aborting device 53 because the topmost device has no interface <0x2ac9f000>
01 06/08/14 7:37:02.058 JobHandler_LuaUPnP::CreateAllServices failed to create 53 <0x2ac9f000>
01 06/08/14 7:37:02.058 Device_LuaUPnP::CreateServices Aborting device 54 because the topmost device has no interface <0x2ac9f000>
01 06/08/14 7:37:02.058 JobHandler_LuaUPnP::CreateAllServices failed to create 54 <0x2ac9f000>
01 06/08/14 7:37:02.058 Device_LuaUPnP::CreateServices Aborting device 55 because the topmost device has no interface <0x2ac9f000>
01 06/08/14 7:37:02.059 JobHandler_LuaUPnP::CreateAllServices failed to create 55 <0x2ac9f000>
01 06/08/14 7:37:02.059 Device_LuaUPnP::CreateServices Aborting device 56 because the topmost device has no interface <0x2ac9f000>
01 06/08/14 7:37:02.059 JobHandler_LuaUPnP::CreateAllServices failed to create 56 <0x2ac9f000>
01 06/08/14 7:37:02.144 Device_LuaUPnP::CreateServices Aborting device 64 because the topmost device has no interface <0x2ac9f000>
01 06/08/14 7:37:02.144 JobHandler_LuaUPnP::CreateAllServices failed to create 64 <0x2ac9f000>
01 06/08/14 7:37:02.144 Device_LuaUPnP::CreateServices Aborting device 67 because the topmost device has no interface <0x2ac9f000>
01 06/08/14 7:37:02.144 JobHandler_LuaUPnP::CreateAllServices failed to create 67 <0x2ac9f000>
01 06/08/14 7:37:02.145 Device_LuaUPnP::CreateServices Aborting device 68 because the topmost device has no interface <0x2ac9f000>
01 06/08/14 7:37:02.145 JobHandler_LuaUPnP::CreateAllServices failed to create 68 <0x2ac9f000>
01 06/08/14 7:37:02.145 Device_LuaUPnP::CreateServices Aborting device 69 because the topmost device has no interface <0x2ac9f000>
01 06/08/14 7:37:02.145 JobHandler_LuaUPnP::CreateAllServices failed to create 69 <0x2ac9f000>
01 06/08/14 7:37:02.152 Device_LuaUPnP::CreateServices Aborting device 74 because the topmost device has no interface <0x2ac9f000>
01 06/08/14 7:37:02.152 JobHandler_LuaUPnP::CreateAllServices failed to create 74 <0x2ac9f000>
01 06/08/14 7:37:02.152 Device_LuaUPnP::CreateServices Aborting device 75 because the topmost device has no interface <0x2ac9f000>
01 06/08/14 7:37:02.152 JobHandler_LuaUPnP::CreateAllServices failed to create 75 <0x2ac9f000>
01 06/08/14 7:37:02.152 Device_LuaUPnP::CreateServices Aborting device 76 because the topmost device has no interface <0x2ac9f000>
01 06/08/14 7:37:02.153 JobHandler_LuaUPnP::CreateAllServices failed to create 76 <0x2ac9f000>
01 06/08/14 7:37:02.153 Device_LuaUPnP::CreateServices Aborting device 77 because the topmost device has no interface <0x2ac9f000>
01 06/08/14 7:37:02.153 JobHandler_LuaUPnP::CreateAllServices failed to create 77 <0x2ac9f000>
01 06/08/14 7:37:02.153 Device_LuaUPnP::CreateServices Aborting device 78 because the topmost device has no interface <0x2ac9f000>
01 06/08/14 7:37:02.154 JobHandler_LuaUPnP::CreateAllServices failed to create 78 <0x2ac9f000>
01 06/08/14 7:37:02.154 Device_LuaUPnP::CreateServices Aborting device 79 because the topmost device has no interface <0x2ac9f000>
01 06/08/14 7:37:02.154 JobHandler_LuaUPnP::CreateAllServices failed to create 79 <0x2ac9f000>
02 06/08/14 7:37:02.182 Device_Service::MatchupUpnpServices no upnp service for urn:micasaverde-com:serviceId:ZWaveDevice1 <0x2ac9f000>
02 06/08/14 7:37:02.184 Device_Service::MatchupUpnpServices no upnp service for urn:micasaverde-com:serviceId:ZWaveDevice1 <0x2ac9f000>
02 06/08/14 7:37:02.186 Device_Service::MatchupUpnpServices no upnp service for urn:micasaverde-com:serviceId:ZWaveDevice1 <0x2ac9f000>
02 06/08/14 7:37:02.188 Device_Service::MatchupUpnpServices no upnp service for urn:micasaverde-com:serviceId:ZWaveDevice1 <0x2ac9f000>
02 06/08/14 7:37:02.198 Device_Service::MatchupUpnpServices no upnp service for urn:upnp-org:serviceID:VContainer1 <0x2ac9f000>

[BulldogLowell]

@hek

I think it would be most helpful if you could confirm you are able to create a S_RAIN device.

RainGuage.ino

[hek]

It pops up for me... (just tried adding a device manually)

Did you download the device.files as a zip.file (you'll find the download-link at the bottom of the page) ? Looks like the rain-xml file is corrupt.. it can happen if you download them one-by-one.

[BulldogLowell]

@hek

THANKS!!!

it was that simple....