Mysensors bootloader
-
I would like to start using this bootloader on all my mysensors boards as I put some in tricky to reach areas and it is a PITA to have to change them!
I read a couple threads with some instructions but I wondering is there an official page? That has caveats etc? Seems like a no brainer to use the bootloader.
Also what hardware do I need to program it?
Thanks muchly!
-
There isn't any official page for this yet as this has mostly been experimental features. We should probably set one up at some time.
To send out an OTA firmware I would recommend using the MYSController which has a nice GUI for it.
But you still need to compile your code and grab the hex-file to send. All this isn't exactly beginner-level stuff. Would have been nice if someone could wrap all this up and incorporate it in the Arduino IDE or something.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login