Vera Inclusion Not Working

[hek]

@MisterE

The plugin has not yet been verified on UI6.

What does your Arduino Nano (<- important) Gateway say when you plug it into your computer and look at the serial output? Did you turn on debug prints when uploading SerialGateway sketch?

http://mysensors.org/build/debug

[MisterE]

In the serial window I'm getting "0;0;ô" followed by several "à" characters.

In the Arduino IDE, I'm seeing this in the bottom window:

Error inside Serial.serialEvent()
java.io.IOException: Bad file descriptor in nativeavailable
at gnu.io.RXTXPort.nativeavailable(Native Method)
at gnu.io.RXTXPort$SerialInputStream.available(RXTXPort.java:1532)
at processing.app.Serial.serialEvent(Serial.java:258)
at gnu.io.RXTXPort.sendEvent(RXTXPort.java:732)
at gnu.io.RXTXPort.eventLoop(Native Method)
at gnu.io.RXTXPort$MonitorThread.run(RXTXPort.java:1575)

I am using an Arduino Nano v3.0.

[Malx]

You must set the right baudrate in serial window, otherwise you will only get garbage.
(default 115200)

[MisterE]

@Malx Thanks. I checked the baud rate in the Serial Window. It is set to 115200.

[MisterE]

I've checked it on a fresh Arduino IDE install and I'm not seeing anything in the Serial Window. I've uncommented the debug line in config.h. If the Serial Gateway is working properly, should I see messages in the Serial Window?

Is anyone using MySensors with UI6?

[MisterE]

I switched to the Ethernet Gateway and I'm now able to see that the Inclusion mode is starting. The start button is highlighted and stays in Inclusion mode for 60 seconds. I haven't yet been able to get it to include a sensor and I'm seeing the following in the Vera log files:

0 04/15/14 9:09:04.140 luup_log:55: Arduino plugin: library L_Arduino loaded LEAK this:57344 start:57344 to 0x928000 <0x2c001680>
50 04/15/14 9:09:04.140 luup_log:55: Arduino: urn:upnp-arduino-cc:serviceId:arduino1,PluginVersion, 1.3, 55 <0x2c001680>
50 04/15/14 9:09:04.141 luup_log:55: Arduino: Using network connection: IP address is 192.168.1.77:5003 <0x2c001680>
50 04/15/14 9:09:04.243 luup_log:55: Arduino: Sending: 0;0;4;4;Get Version <0x2c001680>
50 04/15/14 9:09:04.256 luup_log:55: Arduino: urn:upnp-arduino-cc:serviceId:arduino1,ArduinoLibVersion, 1.2+, 55 LEAK this:24576 start:81920 to 0x92e000 <0x2e801680>
01 04/15/14 9:09:04.647 FileUtils::ReadURL 0/resp:404 ERROR:Resource doesn't exist size 29 https://us-device12.mios.com/device/device/device/35021529/kit LEAK this:73728 start:155648 to 0x940000 <0x2c001680>
01 04/15/14 9:09:04.650 JobHandler_LuaUPnP::DoFetchKits server: us-device12.mios.com error:404 unable to parse: (null) <0x2c001680>
01 04/15/14 9:09:05.027 FileUtils::ReadURL 0/resp:404 ERROR:Resource doesn't exist size 29 https://us-device11.mios.com/device/device/device/35021529/kit LEAK this:135168 start:290816 to 0x961000 <0x2c001680>
01 04/15/14 9:09:05.029 JobHandler_LuaUPnP::DoFetchKits server: us-device11.mios.com error:404 unable to parse: (null) <0x2c001680>
08 04/15/14 9:10:29.251 JobHandler_LuaUPnP::HandleActionRequest device: 55 service: urn:upnp-arduino-cc:serviceId:arduino1 action: StartInclusion LEAK this:69632 start:360448 to 0x972000 <0x2ec01680>

The 6th through 9th line are showing errors. Can anyone point me in the right direction?

Thanks,

Robert

[hek]

The errors is not related to Arduino plugin.

You seem to receive the version from your arduino (which means that communication between vera<->gw is working).

Please check the troubleshoot guide and post sensor debug logs for further assistance.

[BulldogLowell]

@MisterE

Are you using the capacitors on the radios?

[MisterE]

@HEK I went through the troubleshoot guide.

I am using the latest version of the MySensors library. The plugin version does not match the library version (Plugin Version 1.3 vs. Lib Version 1.2+). My understanding based upon another post, is that this discrepancy should be fine.
I've triple-checked the radio wiring.
I have not tried adding a decoupling capacitor.
I am not using an amplified version of the NRF24L01+ chip.

Below is a copy of the sensor debug logs:

These three lines appear about every second:

Relaying message back to gateway.
Tx: fr=255,to=0,la=255,ne=0,ci=255,mt=4,ty=5,cr=136:
Ack: receive timeout

These two lines appear every 10 seconds:

No relay nodes was found. Trying again in 10 seconds.
Tx: fr=255,to=255,la=255,ne=255,ci=255,mt=4,ty=9,cr=184:

@BULLDOGLOWELL I haven't tried the capacitors yet. I'll order some and give it a try. FWIW, I have the radios within a few feet of each other.

If there's anything else you can suggest, I'd greatly appreciate it.

Thanks,

Robert

[hek]

While waiting for the capacitors you can always try to switch radio (if you got the 10-pack) to rule out HW failure.
Which type of Arduino are you using for the sensor side? And what type of regulator (if any)?

[MisterE]

@hek That was it. I swapped the radio and all is well. Thank you for your patience HEK!

[hek]

@MisterE
Good!

If you try the "broken" radio with a capacitor it will probably work fine.