Understanding the message
-
I have had a read through the general API info and I think I generally understand the message formats, but not sure why my system would always be sending the following string/payload and what it exactly means (think it is from the temp/humidity sensor reading.
0;0;3;0;9;read: 20-20-0;0;3;0;9;read: 20-20-0
s=1,c=1,t=0,pt=7,l=5,sg=0:5.0The other message is OK which is from the straight temp sensor. That is easy to understand.
2;0;1;0;0;15.7
-
@ch3b7 Thanks for that.
When reading through the API info, the 0,0,3,0,9 message relates to an internal type message, which I get. However I don't understanding why I seem to get it continually occurring on my serial port when I monitor it (every few minutes). However when I am running MYSController, the only internal message that comes up is when the gate way reboots?
Wondering why I would see the difference.
Serial Output
MYSController Output with only two internal messages
-
@ch3b7 Thanks for that.
When reading through the API info, the 0,0,3,0,9 message relates to an internal type message, which I get. However I don't understanding why I seem to get it continually occurring on my serial port when I monitor it (every few minutes). However when I am running MYSController, the only internal message that comes up is when the gate way reboots?
Wondering why I would see the difference.
Serial Output
MYSController Output with only two internal messages
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login