Understanding the message

[diggs]

I have had a read through the general API info and I think I generally understand the message formats, but not sure why my system would always be sending the following string/payload and what it exactly means (think it is from the temp/humidity sensor reading.

0;0;3;0;9;read: 20-20-0;0;3;0;9;read: 20-20-0
s=1,c=1,t=0,pt=7,l=5,sg=0:5.0

The other message is OK which is from the straight temp sensor. That is easy to understand.

2;0;1;0;0;15.7

[ch3b7]

see this post

[diggs]

This post is deleted!

[diggs]

@ch3b7 Thanks for that.

When reading through the API info, the 0,0,3,0,9 message relates to an internal type message, which I get. However I don't understanding why I seem to get it continually occurring on my serial port when I monitor it (every few minutes). However when I am running MYSController, the only internal message that comes up is when the gate way reboots?

Wondering why I would see the difference.

Serial Output

MYSController Output with only two internal messages

[ch3b7]

@diggs to hide this 0,0,3,0,9 you need disable "#define DEBUG" replace with "//#define DEBUG" in libraries\MySensors\MyConfig.h and then upload sketch again

[tekka]

@diggs the internal/debug (=I_LOG) messages are filtered from the main tab and displayed in the MySensors Debug tab.

[diggs]

hi guys

thanks all for the responses. Tis all clear now and makes sense