Transmit problem
-
Today I try to test a node and sometimes I have a lot of packet wich not reach the gateway. I didn't move gateway and node. Both 1.5 (perhaps old version for gateway) master branch for node (sensebender). Sensebender sketch with FORCE_TRANSMIT_INTERVAL set to 0.
Doesn't know wath is the problem. During the last night only 1 lost packet. Is it wifi related ?
Currently I use default channel (76).
And last question for the gateway, power is set to LOW by default. Why ?
-
@Fabien said:
And last question for the gateway, power is set to LOW by default. Why ?
As a safety measure, because historically many people hooked up an amplified NRF-module without giving it enough juice. On a regular module the power setting doesn't matter.
-
Ok thank you. I try with another sensebender and radio from Itead. Will see in 24 hours if it's better. I change network to channel 120 too. Seems to work, but for how many time ...
-
Works fine with channel 120. No more lost packets.
Suggested Topics
-
Day 1 - Status report
Announcements • 23 Mar 2014, 22:45 • hek 24 Mar 2014, 20:12 -
Compiling Sensor code using BME280 and ESP8266
Troubleshooting • 26 Feb 2025, 00:32 • dpcons 26 Feb 2025, 06:22 -
Can not compile MySensors on esp8266
Troubleshooting • 24 Aug 2024, 15:35 • TheoL 29 Aug 2024, 20:47 -
Raspberry Pi 5: invalid GPIO 9
Troubleshooting • 27 Aug 2024, 13:20 • igo 27 Aug 2024, 13:20 -
JSN SR04T - Temperature Influencing Readings
Troubleshooting • 6 Sept 2019, 07:51 • Timbergetter 12 days ago -
NODs stop responding, but ping works.
Troubleshooting • 8 Mar 2025, 19:47 • Marcin 8 Mar 2025, 19:47
