Transmit problem
-
Today I try to test a node and sometimes I have a lot of packet wich not reach the gateway. I didn't move gateway and node. Both 1.5 (perhaps old version for gateway) master branch for node (sensebender). Sensebender sketch with FORCE_TRANSMIT_INTERVAL set to 0.
Doesn't know wath is the problem. During the last night only 1 lost packet. Is it wifi related ?
Currently I use default channel (76).
And last question for the gateway, power is set to LOW by default. Why ?
-
@Fabien said:
And last question for the gateway, power is set to LOW by default. Why ?
As a safety measure, because historically many people hooked up an amplified NRF-module without giving it enough juice. On a regular module the power setting doesn't matter.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login