Extract MySensors data to another system?
-
Sorry if this has been answered but I have searched and not found anything.
I am quite new to MySensors but I have a slowly growing system of sensors, a serial gateway and Domoticz on a Raspberry Pi, all working fine.I want to integrate my existing weather station which currently uses an Arduino Uno with hard-wired sensors (temperature, humidity, rain gauge, wind speed, wind direction) and an ethernet shield by adding a MySensors node to each sensor, collecting data into Domoticz.
As part of this I want to keep the ability of my station to upload my weather data to Weather Underground, but this means that I will need to somehow access the 'live' data from my network (or extract it from Domoticz, which I realise isn't anything that can be discussed here).
Does anyone have any ideas of how I could accomplish this? Can I build a 'listening' sensor which can extract and process data 'heard' on the network, or should I be looking at exporting it from the controller side?
Thanks in anticipation!
-
Answering my own question, this seems to be the way to go.
I don't know how I never found this before ..https://www.domoticz.com/wiki/Extracting_status_and_measuring_values_with_PHP
and
http://www.domoticz.com/wiki/Domoticz_API/JSON_URL's
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login