Can't get RFM69 working

[carlierd]

hello,

How did you powered the rfm69 on the uno ? using the 3.3 from the uno or using a voltage regulator ?
I first used voltage regulator but I encountered some issues with the uno so I finally directly used the 3.3 from the uni board.

another thing, remove not used include such 'MyTransportNRF24' in your code.

I will post my gateway and sensor code thus evening as I can't do it from my phone now ...

[Sweebee]

The RFM is powered by the regulator. Havent tried to power it from the 3v from the arduino yet.

[carlierd]

Hello,

The code as promise.
For the gateway I don't change a lot of thing from the example provided in the lib:

/**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 */

/**************************************************************************************/
/* Serial gateway (RFM69 with encryption, soft signing and LEDs).                     */
/*                                                                                    */
/* Version     : 0.1.1                                                                */
/* Date        : 29/11/2015                                                           */
/* Modified by : David Carlier                                                        */
/**************************************************************************************/

#define NO_PORTB_PINCHANGES

#include <MyTransportRFM69.h>
#include <MyHwATMega328.h>
#include <MySigningAtsha204Soft.h>

#include <SPI.h>
#include <MyParserSerial.h>
#include <MySensor.h>
#include <stdarg.h>
#include <PinChangeInt.h>
#include "GatewayUtil.h"

#define INCLUSION_MODE_TIME 1 // Number of minutes inclusion mode is enabled
#define INCLUSION_MODE_PIN  3 // Digital pin used for inclusion mode button
#define RADIO_ERROR_LED_PIN 4  // Error led pin
#define RADIO_RX_LED_PIN    6  // Receive led pin
#define RADIO_TX_LED_PIN    5  // the PCB, on board LED

//Construct MySensors library
MySigningAtsha204Soft signer;
MyHwATMega328 hw;
MyTransportRFM69 transport;
MySensor gw(transport, hw, signer, RADIO_RX_LED_PIN, RADIO_TX_LED_PIN, RADIO_ERROR_LED_PIN);

//Variables
char inputString[MAX_RECEIVE_LENGTH] = "";
int inputPos = 0;
boolean commandComplete = false;

void parseAndSend(char *commandBuffer);

void output(const char *fmt, ... ) {
   va_list args;
   va_start (args, fmt );
   vsnprintf_P(serialBuffer, MAX_SEND_LENGTH, fmt, args);
   va_end (args);
   Serial.print(serialBuffer);
}

  
/**************************************************************************************/
/* Initialization                                                                     */
/**************************************************************************************/
void setup()
  {
  //Start MySensors
  gw.begin(incomingMessage, 0, true, 0);
  setupGateway(INCLUSION_MODE_PIN, INCLUSION_MODE_TIME, output);

  //Add interrupt for inclusion button to pin
  PCintPort::attachInterrupt(pinInclusion, startInclusionInterrupt, RISING);

  //Send startup log message on serial
  serial(PSTR("0;0;%d;0;%d;Gateway startup complete.\n"), C_INTERNAL, I_GATEWAY_READY);
  }

/**************************************************************************************/
/* Main loop                                                                          */
/**************************************************************************************/
void loop()
  {
  gw.process();

  checkButtonTriggeredInclusion();
  checkInclusionFinished();

  if (commandComplete)
    {
    //A command wass issued from serial interface
    //We will now try to send it to the actuator
    parseAndSend(gw, inputString);
    commandComplete = false;  
    inputPos = 0;
    }
  }

/*
  SerialEvent occurs whenever a new data comes in the
 hardware serial RX.  This routine is run between each
 time loop() runs, so using delay inside loop can delay
 response.  Multiple bytes of data may be available.
 */
void serialEvent() {
  while (Serial.available()) {
    // get the new byte:
    char inChar = (char)Serial.read(); 
    // if the incoming character is a newline, set a flag
    // so the main loop can do something about it:
    if (inputPos<MAX_RECEIVE_LENGTH-1 && !commandComplete) { 
      if (inChar == '\n') {
        inputString[inputPos] = 0;
        commandComplete = true;
      } else {
        // add it to the inputString:
        inputString[inputPos] = inChar;
        inputPos++;
      }
    } else {
       // Incoming message too long. Throw away 
        inputPos = 0;
    }
  }
}

For the sensor, there is more difference from the humidity example:

/**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 */

/**************************************************************************************/
/* Temperature, humidity and luminosity measurements.                                 */
/*                                                                                    */
/* Version     : 1.1.5                                                                */
/* Date        : 04/01/2016                                                           */
/* Modified by : David Carlier                                                        */
/**************************************************************************************/
/*                                ---------------                                     */
/*                            RST |             |  A5                                 */
/*                            RX  |             |  A4                                 */
/*                            TX  |   ARDUINO   |  A3                                 */
/*     RFM69 (DIO0) --------- D2  |     UNO     |  A2                                 */
/*            DHT22 --------- D3  |             |  A1                                 */
/*            Power --------- D4  | ATMEGA 328p |  A0 --------- Light dep. resistor   */
/*              +3v --------- VCC |             | GND --------- GND                   */
/*              GND --------- GND |  8MHz int.  | REF                                 */
/*                            OSC |             | VCC --------- +3v                   */
/*                            OSC |             | D13 --------- RFM69 (SCK)           */
/*                            D5  |             | D12 --------- RFM69 (MISO)          */
/*                            D6  |             | D11 --------- RFM69 (MOSI)          */
/*                            D7  |             | D10 --------- RFM69 (NSS)           */
/*                            D8  |             |  D9                                 */
/*                                ---------------                                     */
/*                                                                                    */
/* Power = Vcc for LDR and DHT22 et SWITCH.                                           */
/* +3v = 2*AA                                                                         */
/*                                                                                    */
/**************************************************************************************/

#include <SPI.h>
#include <MySensor.h>
#include <dht.h>
#include <MyTransportRFM69.h>
#include <MySigningAtsha204Soft.h>

#define CHILD_ID_HUM 0
#define CHILD_ID_TEMP 1
#define CHILD_ID_LIGHT 2
#define CHILD_ID_VOLTAGE 3
#define LIGHT_SENSOR_ANALOG_PIN 0
#define HUMIDITY_SENSOR_DIGITAL_PIN 3
#define POWER_PIN 4
unsigned long SLEEP_TIME = 275000; // Sleep time between reads (in milliseconds)

//Construct MySensors library
MySigningAtsha204Soft signer;
MyHwATMega328 hw;
MyTransportRFM69 transport;
MySensor gw(transport, hw, signer);
dht DHT;
MyMessage msgHum(CHILD_ID_HUM, V_HUM);
MyMessage msgTemp(CHILD_ID_TEMP, V_TEMP);
MyMessage msgLum(CHILD_ID_LIGHT, V_LEVEL);
MyMessage msgVolt(CHILD_ID_VOLTAGE, V_VOLTAGE);

/**************************************************************************************/
/* Initialization                                                                     */
/**************************************************************************************/
void setup()
  {
  //Get time (for setup duration)
  #ifdef DEBUG
    unsigned long startTime = millis();
  #endif

  //Start MySensors
  gw.begin();

  //Send the Sketch Version Information to the Gateway
  gw.sendSketchInfo("GHAS sensor", "1.1.5");

  //Register all sensors to gw (they will be created as child devices)
  gw.present(CHILD_ID_HUM, S_HUM);
  gw.present(CHILD_ID_TEMP, S_TEMP);
  gw.present(CHILD_ID_LIGHT, S_LIGHT_LEVEL);
  gw.present(CHILD_ID_VOLTAGE, S_MULTIMETER);

  //Delay for DHT22
  delay(1500);

  //Print setup debug
  #ifdef DEBUG
    int duration = millis() - startTime;
    Serial.print("[Setup duration: "); Serial.print(duration, DEC); Serial.println(" ms]");
  #endif
  }

/**************************************************************************************/
/* Main loop                                                                          */
/**************************************************************************************/
void loop()
  {
  //Get time (for a complete loop)
  #ifdef DEBUG
    unsigned long startTime = millis();
  #endif

  //Power on
  powerOnPeripherals();
  delay(2000);

  //Get DHT22 data
  int dht22Result = DHT.read22(HUMIDITY_SENSOR_DIGITAL_PIN);
  switch (dht22Result)
    {
    case DHTLIB_OK:  
                //Serial.println("OK,\t");
                break;
    case DHTLIB_ERROR_CHECKSUM:
                #ifdef DEBUG
                  Serial.println("Checksum error,\t");
                #endif
                break;
    case DHTLIB_ERROR_TIMEOUT:
                #ifdef DEBUG
                  Serial.println("Time out error,\t");
                #endif
                break;
    case DHTLIB_ERROR_CONNECT:
                #ifdef DEBUG
                  Serial.println("Connect error,\t");
                #endif
                break;
    case DHTLIB_ERROR_ACK_L:
                #ifdef DEBUG
                  Serial.println("Ack Low error,\t");
                #endif
                break;
    case DHTLIB_ERROR_ACK_H:
                #ifdef DEBUG
                  Serial.println("Ack High error,\t");
                #endif
                break;
    default:
                #ifdef DEBUG
                  Serial.println("Unknown error,\t");
                #endif
                break;
    }

  //Get temperature and humidity
  float temperature = 0;
  float humidity = 0;
  if (dht22Result == DHTLIB_OK)
    {
    temperature = DHT.temperature;
    humidity = DHT.humidity;
    }

  //Get power before luminosity to use real voltage
  float realVoltage = getVoltage() / 100.0;
  int batteryPcnt = realVoltage * 100 / 3.0;
  if (batteryPcnt > 100) {batteryPcnt = 100;}
  int lux = computeIlluminance(realVoltage);

  //Power off
  powerOffPeripherals();

  //Send data to gateway
  gw.send(msgHum.set(humidity, 1));
  gw.send(msgTemp.set(temperature, 1));
  gw.send(msgLum.set(lux));
  gw.send(msgVolt.set(realVoltage, 2));
  gw.sendBatteryLevel(batteryPcnt);

  //Print debug
  #ifdef DEBUG
    Serial.print(temperature, 1);
    Serial.print(" degC");
    Serial.print("   ");
    Serial.print(humidity, 1);
    Serial.print(" %");
    Serial.print("   ");
    Serial.print(lux);
    Serial.print(" lx");
    Serial.print("   ");
    Serial.print(realVoltage);
    Serial.print(" v");
    int duration = millis() - startTime;
    Serial.print("   ");
    Serial.print("["); Serial.print(duration, DEC); Serial.println(" ms]");
    Serial.flush();
  #endif

  //Sleep
  gw.sleep(SLEEP_TIME);
  }

/**************************************************************************************/
/* Allows to compute illuminance (in LUX) from LIGHT_SENSOR_ANALOG_PIN.               */
/**************************************************************************************/
int computeIlluminance(float realVoltage)
  {
  //Get luminosity
  int luminosity = analogRead(LIGHT_SENSOR_ANALOG_PIN);
  //Calculating the voltage in the input of the ADC
  double voltage = realVoltage * ((double)luminosity / 1024.0);
  //Calculating the resistance of the photoresistor in the voltage divider
  double resistance = (10.0 * realVoltage) / voltage - 10.0;
  //Calculating the intensity of light in lux and return it
  int illuminance = 255.84 * pow(resistance, -10/9);
  return illuminance;
  }

/**************************************************************************************/
/* Allows to get the real Vcc (return value * 100).                                   */
/**************************************************************************************/
int getVoltage()
  {
  const long InternalReferenceVoltage = 1056L;
  ADMUX = (0<<REFS1) | (1<<REFS0) | (0<<ADLAR) | (1<<MUX3) | (1<<MUX2) | (1<<MUX1) | (0<<MUX0);
  delay(50);  // Let mux settle a little to get a more stable A/D conversion
  //Start a conversion  
  ADCSRA |= _BV( ADSC );
  //Wait for it to complete
  while (((ADCSRA & (1<<ADSC)) != 0));
  //Scale the value
  int result = (((InternalReferenceVoltage * 1023L) / ADC) + 5L) / 10L;
  return result;
  }

/**************************************************************************************/
/* Allows to power ON peripherals.                                                    */
/**************************************************************************************/
void powerOnPeripherals()
  {
  //Power-up
  pinMode (POWER_PIN, OUTPUT);
  digitalWrite (POWER_PIN, HIGH);
  delay(1);
  }

/**************************************************************************************/
/* Allows to power OFF peripherals.                                                   */
/**************************************************************************************/
void powerOffPeripherals()
  {
  //Power off
  digitalWrite (HUMIDITY_SENSOR_DIGITAL_PIN, LOW);
  digitalWrite (POWER_PIN, LOW);
  pinMode (HUMIDITY_SENSOR_DIGITAL_PIN, INPUT);
  pinMode (POWER_PIN, INPUT);
  }

David

[Sweebee]

Thanks, will try it :)

[lafleur]

How do you change I/O pins define for the RFM69 if using a different platform??

will this work under 1.6 development ?

Thanks

[Sweebee]

@carlierd I tried to compile your gateway but i get this error:

Arduino: 1.6.5 (Mac OS X), Board:"Arduino Uno"

SerialGateway:52: error: no matching function for call to 'MySensor::MySensor(MyTransportRFM69&, MyHwATMega328&, MySigningAtsha204Soft&, int, int, int)'
SerialGateway.ino:52:91: note: candidates are:
In file included from SerialGateway.ino:37:0:
/Users/Wiebe/Documents/Arduino/libraries/MySensors/MySensor.h:158:2: note: MySensor::MySensor(MyTransport&, MyHw&)
  MySensor(MyTransport &radio =*new MyTransportNRF24(), MyHw &hw=*new MyHwDriver()
  ^
/Users/Wiebe/Documents/Arduino/libraries/MySensors/MySensor.h:158:2: note:   candidate expects 2 arguments, 6 provided
/Users/Wiebe/Documents/Arduino/libraries/MySensors/MySensor.h:149:7: note: MySensor::MySensor(const MySensor&)
 class MySensor
       ^
/Users/Wiebe/Documents/Arduino/libraries/MySensors/MySensor.h:149:7: note:   candidate expects 1 argument, 6 provided
no matching function for call to 'MySensor::MySensor(MyTransportRFM69&, MyHwATMega328&, MySigningAtsha204Soft&, int, int, int)'

[carlierd]

Hello,

I am using stable version of MySensors not the dev branch. What version are you using ?

David

[Sweebee]

@carlierd 1.5 https://github.com/mysensors/Arduino/tree/master

[carlierd]

@Sweebee said:

SerialGateway:52: error: no matching function for call to 'MySensor::MySensor(MyTransportRFM69&, MyHwATMega328&, MySigningAtsha204Soft&, int, int, int)'

Did you enabled signing feature in MyConfig.h : #define MY_SIGNING_FEATURE ??

[Sweebee]

I think the gateway works now, i removed the separate 5-3.3v converter and used the arduino 3.3v.

Now the sensor, i uploaden your sketch, but i get no init message?

[carlierd]

Did you connect the gateway to a controller ? or to MYSController ? You get the gateway ready message ?

For the sensor, you are using the sketch I upload ?
Debug mode is enable in MyConfig.h ?

You should have some debug messages in the console when connecting to the node.

David.

[Sweebee]

The problem is on the uno everything seems to work fine.

for the sensor i attached the RFM to a arduino pro mini 3.3v

double checked the wiring, tried 2 different RFM's, tried 2 arduino pro mini's.

uploaden the gateway to it and i get:

0;0;3;0;9;gateway started, id=0, parent=0, distance=0

but when i try to send something with the pro mini i get nothing back, while on the UNO I get:

0;0;3;0;9;send: 0-0-10-10 s=1,c=1,t=2,pt=0,l=1,sg=0,st=fail:1

So on the pro mini i get the init message, but no message when i try to send something.

[carlierd]

RFM69 or RFM69HW ?

For RFM69HW you have to modify MyTransportRFM69.hand enable HW model on line 33.
Replace bool isRFM69HW=falseby bool isRFM69HW=true.

Nothing on the serial output of the pro mini ??

[fets]

Do you use 4.7uF capacitor ?

[Sweebee]

Yes i have the HW versions, so i replaced bool isRFM69HW=false by bool isRFM69HW=true

added a capacitor.

refreshed and still no feedback after sending.

I get a serial output from the pro mini on start. but no more serial messages when i try to send a message.

[carlierd]

Put your arduino pro debug message to see what happens.

You used DHT22 ?

[Sweebee]

Its working now!

Gateway doesn't work on the pro mini, but your sensor sketch is working :D

now the next thing, i get a lot of fails:

send: 10-10-0-0 s=255,c=3,t=11,pt=0,l=11,sg=0,st=fail:GHAS sensor
send: 10-10-0-0 s=255,c=3,t=12,pt=0,l=5,sg=0,st=fail:1.1.5
send: 10-10-0-0 s=0,c=0,t=7,pt=0,l=0,sg=0,st=fail:
find parent
send: 10-10-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,st=bc:
send: 10-10-0-0 s=1,c=0,t=6,pt=0,l=0,sg=0,st=fail:
send: 10-10-0-0 s=2,c=0,t=16,pt=0,l=0,sg=0,st=fail:
send: 10-10-0-0 s=3,c=0,t=30,pt=0,l=0,sg=0,st=fail:
[Setup duration: 7385 ms]
send: 10-10-0-0 s=0,c=1,t=1,pt=7,l=5,sg=0,st=fail:0.0
send: 10-10-0-0 s=1,c=1,t=0,pt=7,l=5,sg=0,st=fail:0.0
send: 10-10-0-0 s=2,c=1,t=37,pt=2,l=2,sg=0,st=fail:9
find parent
send: 10-10-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,st=bc:
send: 10-10-0-0 s=3,c=1,t=38,pt=7,l=5,sg=0,st=fail:3.30
send: 10-10-0-0 s=255,c=3,t=0,pt=1,l=1,sg=0,st=fail:100
0.0 degC   0.0 %   9 lx   3.30 v   [4851 ms]

but the gateway receives everything fine?

22:13:05.403 [pimatic-mysensors] debug: <- Presented Node  [ '10', '0', '0', '0', '7', '' ]
22:13:05.451 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
22:13:05.497 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
22:13:05.538 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
22:13:05.980 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;send: 0-0-10-10 s=255,c=3,t=8,pt=1,l=1,sg=0,st=fail:0
22:13:06.115 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;send: 0-0-10-10 s=255,c=3,t=8,pt=1,l=1,sg=0,st=fail:0
22:13:06.246 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;send: 0-0-10-10 s=255,c=3,t=8,pt=1,l=1,sg=0,st=fail:0
22:13:07.594 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=1,c=0,t=6,pt=0,l=0,sg=0:
22:13:07.594 [pimatic-mysensors] debug: <- Presented Node  [ '10', '1', '0', '0', '6', '' ]
22:13:07.635 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=1,c=0,t=6,pt=0,l=0,sg=0:
22:13:07.639 [pimatic-mysensors] debug: <- Presented Node  [ '10', '1', '0', '0', '6', '' ]
22:13:07.680 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=1,c=0,t=6,pt=0,l=0,sg=0:
22:13:07.680 [pimatic-mysensors] debug: <- Presented Node  [ '10', '1', '0', '0', '6', '' ]
22:13:07.729 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=2,c=0,t=16,pt=0,l=0,sg=0:
22:13:07.729 [pimatic-mysensors] debug: <- Presented Node  [ '10', '2', '0', '0', '16', '' ]
22:13:07.774 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=2,c=0,t=16,pt=0,l=0,sg=0:
22:13:07.775 [pimatic-mysensors] debug: <- Presented Node  [ '10', '2', '0', '0', '16', '' ]
22:13:07.815 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=2,c=0,t=16,pt=0,l=0,sg=0:
22:13:07.816 [pimatic-mysensors] debug: <- Presented Node  [ '10', '2', '0', '0', '16', '' ]
22:13:07.864 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=3,c=0,t=30,pt=0,l=0,sg=0:
22:13:07.865 [pimatic-mysensors] debug: <- Presented Node  [ '10', '3', '0', '0', '30', '' ]
22:13:07.909 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=3,c=0,t=30,pt=0,l=0,sg=0:
22:13:07.909 [pimatic-mysensors] debug: <- Presented Node  [ '10', '3', '0', '0', '30', '' ]
22:13:07.950 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=3,c=0,t=30,pt=0,l=0,sg=0:
22:13:07.954 [pimatic-mysensors] debug: <- Presented Node  [ '10', '3', '0', '0', '30', '' ]
22:13:10.060 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=0,c=1,t=1,pt=7,l=5,sg=0:0.0
22:13:10.105 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=0,c=1,t=1,pt=7,l=5,sg=0:0.0
22:13:10.150 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=0,c=1,t=1,pt=7,l=5,sg=0:0.0
22:13:10.244 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=1,c=1,t=0,pt=7,l=5,sg=0:0.0
22:13:10.289 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=1,c=1,t=0,pt=7,l=5,sg=0:0.0
22:13:10.342 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=2,c=1,t=37,pt=2,l=2,sg=0:9
22:13:10.383 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=2,c=1,t=37,pt=2,l=2,sg=0:9
22:13:10.428 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=2,c=1,t=37,pt=2,l=2,sg=0:9
22:13:10.477 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
22:13:10.522 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
22:13:10.563 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
22:13:10.903 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;send: 0-0-10-10 s=255,c=3,t=8,pt=1,l=1,sg=0,st=fail:0
22:13:11.038 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;send: 0-0-10-10 s=255,c=3,t=8,pt=1,l=1,sg=0,st=fail:0
22:13:11.174 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;send: 0-0-10-10 s=255,c=3,t=8,pt=1,l=1,sg=0,st=fail:0
22:13:12.583 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=3,c=1,t=38,pt=7,l=5,sg=0:3.30
22:13:12.628 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=3,c=1,t=38,pt=7,l=5,sg=0:3.30
22:13:12.673 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=3,c=1,t=38,pt=7,l=5,sg=0:3.30
22:13:12.722 [pimatic-mysensors] debug: <- I_LOG_MESSAGE  0;0;3;0;9;read: 10-10-0 s=255,c=3,t=0,pt=1,l=1,sg=0:100

[carlierd]

It's perhaps due to the signing feature ...

May be you should disable it for the moment.

Disable the feature in MyConfig.h and replace the gateway constructor by:

MySensor gw(transport, hw /*, signer*/, RADIO_RX_LED_PIN, RADIO_TX_LED_PIN, RADIO_ERROR_LED_PIN);

[Sweebee]

Thanks! it working great now.

Why does signing not work? Because of the controller? or is this handled by the gateway?

Edit: Oh it was disabled on the gateway, now it works :)

[carlierd]

Good news !!

If you enable signing, don't forget to change MY_HMAC_KEYin MyConfig.h !

David.