Home Assistant v 0.11.1 with switch support
-
Thank you, it works fine now. My main problem was related to the mqtt version: it must be 3.1.1, while linux default is an old version capable only 3.1.
-
Hi,
I installed Home-assistant and Setup a MySensor SerialGateWay + MySensor Switch.
Yet when I start HA It shows this Error:16-01-18 17:27:38 homeassistant.components.mysensors: Missing required configuration items in mysensors: gateways 16-01-18 17:27:38 homeassistant.bootstrap: component mysensors failed to initialize```Config:
mysensors 1: gateways: - port: '/dev/ttyUSB0' persistence_file: 'hass_log/mysensors.json' debug: true persistence: true version: '1.5'
-
Hi!
You should only have one mysensors domain, so remove the "1" after "mysensors" in your config:
mysensors: gateways: - port: '/dev/ttyUSB0' persistence_file: 'hass_log/mysensors.json' debug: true persistence: true version: '1.5'
-
@martinhjelmare
Thank you!
Seems to Load now
I disabled persistence because I did not seem to need it right now.
I am getting the following log when I Push the Wireless Button, it seems to work.
But I dont see any now nodes / Sensor on the Dashboard. Did I forget something?INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=3,c=1,t=16,pt=2,l=2,sg=0:1 INFO:homeassistant.components.mysensors:update sensor_update: node 1 INFO:homeassistant.components.mysensors:No sketch_name: node 1 INFO:homeassistant.components.mysensors:No sketch_name: node 1 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=3,c=1,t=16,pt=2,l=2,sg=0:0 INFO:homeassistant.components.mysensors:update sensor_update: node 1 INFO:homeassistant.components.mysensors:No sketch_name: node 1 INFO:homeassistant.components.mysensors:No sketch_name: node 1
-
INFO:homeassistant.components.mysensors:No sketch_name: node 1This indicates that the gateway hasn't received all presentation messages from node 1. It's missing sketch name for this node.
If you disable persistence you have to restart your nodes each time you restart home assistant, to resend the presentation messages.
-
@martinhjelmare
Got that worked out, changed the Name in the Persistence File that HA created!
But it still does not show up.
HA Log:INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=3,c=1,t=16,pt=2,l=2,sg=0:1 INFO:homeassistant.components.mysensors:update sensor_update: node 1 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=3,c=1,t=16,pt=2,l=2,sg=0:0 INFO:homeassistant.components.mysensors:update sensor_update: node 1 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=3,c=1,t=16,pt=2,l=2,sg=0:1 INFO:homeassistant.components.mysensors:update sensor_update: node 1 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=3,c=1,t=16,pt=2,l=2,sg=0:0 INFO:homeassistant.components.mysensors:update sensor_update: node 1Persistence File:
{"1": {"sketch_version": null, "children": {"3": {"type": 0, "values": {"16": "0"}, "id": 3}}, "sketch_name": "testgateway", "battery_level": 0, "sensor_id": 1, "type": 17}}
-
I can't see anything obviously wrong with the persistence file, except for sketch version being null, although that is not used by HA. Try changing that to "1.0" and restart.
-
Btw, your values are setup for a door sensor and not a switch. Maybe that was your intention?
-
@martinhjelmare
I Changed the Version, yet there is nothing added to the dashboard.
I used the sample BinarySwitch example sketch of MYS. The Sensor Arduino has a button connected to Pin 3.
I'm relativly new here so maybe I missed something. And I don't know what Values you mean.
-
Can you post your sketch and the complete log of HA after start? You can censor any sensitive info.
-
A clarification: In home assistant a switch is something you can turn on/off from home assistant, an actuator. The BinarySwitch example in mysensors examples is something you turn on/off by the node, a sensor.
It should work anyhow, but I was a bit confused at first.
-
The Whole log is:
screenlog.txt
The Sketch is:
BinarySwitchSensor.ino
The Sketch was not modified and should be the same as the one of the MYS download Page.Do I maybe have to add anything to my config.yaml besides the plattform thing?
-
Unfortunately, I've realized this is a bug caused by me. There will be a bugfix release soon, so I hope we can have a fix for this in there. Sorry for the inconvenience!
Right now the binary sensors are missing in the sensor platform. I think it's due to me planning to do a binary sensor platform, but then changing my mind, and posponing that. Again sorry!
-
Alright then, I started to feel a bit dumb
If you need any help let me know!
Thank you for looking into the issue
-
Thanks for testing and reporting the problem. All feedback is very welcome and important, cause even though I try to test most scenarios, it's easy to miss something. In this case, though, I feel a bit embarrassed.
I've submitted a tested pull request which fixes this, and it has already been merged. Hopefully the bugfix release will be live very soon.
-
Update: Bugfix release 0.11.1 is now out.
-
Nice!
Thank you, I installed it, works like a charm!
Going to try a HA switch tomorrow!
Are 1-Wire Components like AM2301 Temp-Sensor already supported?
-
I'm not sure that the library provided with mysensors supports DHT21 (AM2301). The readme for DHT library only mentions "DHT11 and DHT22, AM2302, RHT03".
But I found this post, where the adafruit library is used together with mysensors:
http://forum.mysensors.org/topic/841/solar-powered-mini-weather-station/53As long as you get your temp/hum sensors going with the correct library there shouldn't be a problem of presenting them as mysensors sensors to home assistant.
-
Well I will look into, thank you!
I do not know if this is the right place for further problems, if not tell me.
I tried to remote control a relay today
I used the official sketch of MYS at https://github.com/mysensors/Arduino/blob/master/libraries/MySensors/examples/RelayActuator/RelayActuator.inoEven though it Looks like they are properly connected, there is no switch appearing on HA-Dashboard.
Log of the Sensor-Arduino Running RelayActuator.ino:send: 1-1-0-0 s=255,c=0,t=18,pt=0,l=5,sg=0,st=ok:1.5.1 send: 1-1-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0 read: 0-0-1 s=255,c=3,t=6,pt=0,l=1,sg=0:M repeater started, id=1, parent=0, distance=1 send: 1-1-0-0 s=255,c=3,t=11,pt=0,l=5,sg=0,st=ok:Relay send: 1-1-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,st=ok:1.0 send: 1-1-0-0 s=1,c=0,t=3,pt=0,l=0,sg=0,st=ok:Log of HA:
INFO:mysensors.mysensors:/dev/ttyUSB0 is open... INFO:mysensors.mysensors:Connected to /dev/ttyUSB0 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:gateway started, id=0, parent=0, distance=0 INFO:homeassistant.components.sensor:Updating sensor entities INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=0,t=18,pt=0,l=5,sg=0:1.5.1 INFO:homeassistant.components.mysensors:update sensor_update: node 1 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:send: 0-0-1-1 s=255,c=3,t=6,pt=0,l=1,sg=0,st=ok:M INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=11,pt=0,l=5,sg=0:Relay INFO:homeassistant.components.mysensors:update sensor_update: node 1 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=12,pt=0,l=3,sg=0:1.0 INFO:homeassistant.components.mysensors:update sensor_update: node 1 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=1,c=0,t=3,pt=0,l=0,sg=0: INFO:homeassistant.components.mysensors:update sensor_update: node 1 INFO:homeassistant.components.device_tracker.nmap_tracker:Scanning INFO:homeassistant.components.device_tracker.nmap_tracker:No MAC address found for 192.168.2.111 INFO:homeassistant.components.device_tracker.nmap_tracker:nmap scan successful INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=0,t=18,pt=0,l=5,sg=0:1.5.1 INFO:homeassistant.components.mysensors:update sensor_update: node 1 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:send: 0-0-1-1 s=255,c=3,t=6,pt=0,l=1,sg=0,st=ok:M INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=11,pt=0,l=5,sg=0:Relay INFO:homeassistant.components.mysensors:update sensor_update: node 1 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=12,pt=0,l=3,sg=0:1.0 INFO:homeassistant.components.mysensors:update sensor_update: node 1 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=1,c=0,t=3,pt=0,l=0,sg=0: INFO:homeassistant.components.mysensors:update sensor_update: node 1```
-
Sorry, I forgot to ask, is it implemented yet?
I just scrambled through the code at HA
https://github.com/balloob/home-assistant/blob/dev/homeassistant/components/switch/mysensors.py
and I could not detect the RELAY type. But than again I do not know alot of both of the systems, just guessing.
-
You should send a value from the node child to set initial state also. I think that's what's missing.
Read my post here:
http://forum.mysensors.org/topic/2388/home-assistant-how-to-recognize-mysensors-nodes/27
-
@martinhjelmare
Would you mind to elaborate a bit more?
I am not sure how to alter the script.
-
For example:
... MySensor gw; MyMessage msgArray[NUMBER_OF_RELAYS]; for (int sensor=1; sensor<=NUMBER_OF_RELAYS;sensor++) { msgArray[sensor-1] = msg(sensor, V_STATUS); } void setup() { ... gw.begin(); for (int sensor=1; sensor<=NUMBER_OF_RELAYS;sensor++) { gw.present(sensor, S_BINARY); gw.send(msgArray[sensor-1].set(0)); } ... }If you don't need to send any more messages after the setup funtion, ie access the message variables in the array anywhere else, you can move the assigning of the array in the first for loop to the second for loop in the setup function, to avoid code duplication.
You need to send at least one value per child to populate all data structures in home assistant.
Edit: You can actually move the assigning of the array and only have one for loop, inside the setup funtion, anyhow, since the array is initialized separately outside the functions.
-
I have installed 0.11.1 and added the lines to configuration.yaml, but my sensors are bit showing in ha itself. The ID of the nodes is being passed to ha in the log, but nothing else. Trying to set to a pir, temp/humid, and relay switches.
-
Please show me the home assistant log. I can't really say anything useful without it.
-
here is the output from /home/pi/.homeassistant/home-assistant.log:
6-01-24 15:08:16 netdisco.ssdp: Found malformed XML at http://192.168.86.142:9080: status=okThis is my configuration.yaml
homeassistant: # Name of the location where Home Assistant is running name: Home # Location required to calculate the time the sun rises and sets latitude: longitude: # C for Celcius, F for Fahrenheit temperature_unit: C # Pick yours from here: http://en.wikipedia.org/wiki/List_of_tz_database_time_zones time_zone: America/Halifax # Enables the frontend frontend: # Checks for available updates updater: # View all events in a logbook logbook: # Track the sun sun: # Enables support for tracking state changes over time. history: # Show links to resources in log and frontend #introduction: # Allows you to issue voice commands from the frontend conversation: # Discover some devices automatically discovery: # Webcams camera 1: platform: mjpeg mjpeg_url: http://192.168.86.117:10012/videofeed name: LivingRoom Camera username: root password: groot # Squeezebox Server media_player 1: platform: squeezebox host: 192.168.86.113 port: 9090 # MySensors Serial Gateway mysensors: gateways: - port: '/dev/ttyUSB0' persistence_file: '/home/pi/.homeassistant/mysensors.json' # debug: true persistence: true version: '1.5'Would it be because my nodes are set for manual ID and not auto?
-
The log file only outputs errors as default. Try starting home assistant from the command line with
hassand then copy the output. It should be a lot more than one line.You should shut down home assistant first if you have it running as a service.
Activate debug first for mysensors though.
-
Here is the .log file
16-01-24 15:25:28 mysensors.mysensors: Error decoding message from gateway, probably received bad byte.And from the SSH console after running hass as instructed
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state media_player.master_bedroom=off; supported_media_commands=1021, friendly_name=Master Bedroom @ 15:25:41 24-01-2016>, entity_id=media_player.master_bedroom> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state media_player.man_cave=off; supported_media_commands=1021, friendly_name=Man Cave @ 15:25:41 24-01-2016>, entity_id=media_player.man_cave> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:pywemo.subscribe:Subscribing to events from <WeMo Switch "CatFan"> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:pywemo.subscribe:Subscribing to events from <WeMo Switch "LivingRoomLamp"> INFO:pywemo.subscribe:Resubscribe for <WeMo Switch "CatFan"> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state media_player.living_room=off; supported_media_commands=1021, friendly_name=Living Room @ 15:25:41 24-01-2016>, entity_id=media_player.living_room> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state switch.catfan=off; friendly_name=CatFan @ 15:25:41 24-01-2016>, entity_id=switch.catfan> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_switches=unknown; auto=True, entity_id=[], friendly_name=all switches @ 15:25:41 24-01-2016>, entity_id=group.all_switches> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_switches=off; auto=True, entity_id=('switch.catfan',), friendly_name=all switches @ 15:25:41 24-01-2016>, entity_id=group.all_switches> INFO:pywemo.subscribe:Resubscribe for <WeMo Switch "LivingRoomLamp"> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:pywemo.subscribe:Received event from <WeMo Switch "CatFan">(192.168.86.108) INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:homeassistant.components.switch.wemo:Subscription update for <WeMo Switch "CatFan"> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state switch.livingroomlamp=off; friendly_name=LivingRoomLamp @ 15:25:42 24-01-2016>, entity_id=switch.livingroomlamp> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_switches=off; auto=True, entity_id=('switch.catfan', 'switch.livingroomlamp'), friendly_name=all switches @ 15:25:42 24-01-2016>, entity_id=group.all_switches> INFO:pywemo.subscribe:Received event from <WeMo Switch "LivingRoomLamp">(192.168.86.163) INFO:homeassistant.components.switch.wemo:Subscription update for <WeMo Switch "LivingRoomLamp"> INFO:pywemo.subscribe:Subscribing to events from <WeMo Insight "Christmas Tree Lights"> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:pywemo.subscribe:Resubscribe for <WeMo Insight "Christmas Tree Lights"> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state switch.christmas_tree_lights=off; friendly_name=Christmas Tree Lights @ 15:25:42 24-01-2016>, entity_id=switch.christmas_tree_lights> INFO:pywemo.subscribe:Received event from <WeMo Insight "Christmas Tree Lights">(192.168.86.111) INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_switches=off; auto=True, entity_id=('switch.christmas_tree_lights', 'switch.catfan', 'switch.livingroomlamp'), friendly_name=all switches @ 15:25:42 24-01-2016>, entity_id=group.all_switches> INFO:homeassistant.components.switch.wemo:Subscription update for <WeMo Insight "Christmas Tree Lights"> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:pywemo.subscribe:Received event from <WeMo Insight "Christmas Tree Lights">(192.168.86.111) INFO:homeassistant.components.switch.wemo:Subscription update for <WeMo Insight "Christmas Tree Lights"> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117 INFO:homeassistant.components.http:"GET /states HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /static/frontend-1003c31441ec44b3db84b49980f736a7.html HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /static/favicon-192x192.png HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /static/favicon.ico HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /api/bootstrap HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /api/stream?api_password=no_password_set&restrict=state_changed,component_loaded,service_registered HTTP/1.1" 200 - INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117 INFO:homeassistant.components.media_player:Updating media_player entities INFO:homeassistant.components.http:"GET /api/error_log HTTP/1.1" 200 - INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1 INFO:homeassistant.components.media_player:Updating media_player entities INFO:homeassistant.components.light:Updating light entities INFO:homeassistant.components.camera:Updating camera entities INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663560.5128732, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, old_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663530.5116684, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, entity_id=camera.livingroom_camera> INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=255,c=0,t=17,pt=0,l=5,sg=0:1.5.1 INFO:homeassistant.components.mysensors:update sensor_update: node 3 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:send: 0-0-3-3 s=255,c=3,t=6,pt=0,l=1,sg=0,st=ok:M INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=255,c=3,t=11,pt=0,l=25,sg=0:2 Door bell/chime INFO:homeassistant.components.mysensors:update sensor_update: node 3 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=255,c=3,t=12,pt=0,l=3,sg=0:1.0 INFO:homeassistant.components.mysensors:update sensor_update: node 3 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=1,c=0,t=3,pt=0,l=0,sg=0: INFO:homeassistant.components.mysensors:update sensor_update: node 3 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=0,c=0,t=1,pt=0,l=0,sg=0: INFO:homeassistant.components.mysensors:update sensor_update: node 3 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=3,c=0,t=3,pt=0,l=0,sg=0: INFO:homeassistant.components.mysensors:update sensor_update: node 3 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=2,c=0,t=1,pt=0,l=0,sg=0: INFO:homeassistant.components.mysensors:update sensor_update: node 3 INFO:homeassistant.components.media_player:Updating media_player entities INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117 INFO:homeassistant.components.http:"GET /states HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /static/frontend-1003c31441ec44b3db84b49980f736a7.html HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /static/favicon-192x192.png HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /static/favicon.ico HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /api/bootstrap HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /api/stream?api_password=no_password_set&restrict=state_changed,component_loaded,service_registered HTTP/1.1" 200 - INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117 INFO:homeassistant.components.api:Found broken event stream to 192.168.86.162, cleaning up INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1 INFO:homeassistant.components.media_player:Updating media_player entities INFO:homeassistant.components.media_player:Updating media_player entities INFO:homeassistant.components.light:Updating light entities INFO:homeassistant.components.camera:Updating camera entities INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663590.5271018, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, old_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663560.5128732, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, entity_id=camera.livingroom_camera> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117 INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state sun.sun=above_horizon; next_rising=11:43:05 25-01-2016, elevation=14.76, next_setting=21:15:13 24-01-2016, friendly_name=Sun @ 15:25:24 24-01-2016>, old_state=<state sun.sun=above_horizon; next_rising=11:43:05 25-01-2016, elevation=14.88, next_setting=21:15:13 24-01-2016, friendly_name=Sun @ 15:25:24 24-01-2016>, entity_id=sun.sun> INFO:homeassistant.components.api:Found broken event stream to 192.168.86.162, cleaning up INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=0,c=1,t=1,pt=7,l=5,sg=0:46.5 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1 INFO:homeassistant.components.media_player:Updating media_player entities INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1 INFO:homeassistant.components.media_player:Updating media_player entities INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=0,c=1,t=1,pt=7,l=5,sg=0:46.6 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1 INFO:homeassistant.components.media_player:Updating media_player entities INFO:homeassistant.components.light:Updating light entities INFO:homeassistant.components.camera:Updating camera entities INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663620.51471, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, old_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663590.5271018, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, entity_id=camera.livingroom_camera> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1 INFO:homeassistant.components.media_player:Updating media_player entities INFO:homeassistant.components.media_player:Updating media_player entities INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1 INFO:homeassistant.components.media_player:Updating media_player entities INFO:homeassistant.components.light:Updating light entities INFO:homeassistant.components.camera:Updating camera entities INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663650.5204854, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, old_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663620.51471, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, entity_id=camera.livingroom_camera> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state sun.sun=above_horizon; next_rising=11:43:05 25-01-2016, elevation=14.63, next_setting=21:15:13 24-01-2016, friendly_name=Sun @ 15:25:24 24-01-2016>, old_state=<state sun.sun=above_horizon; next_rising=11:43:05 25-01-2016, elevation=14.76, next_setting=21:15:13 24-01-2016, friendly_name=Sun @ 15:25:24 24-01-2016>, entity_id=sun.sun> INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=0,c=1,t=1,pt=7,l=5,sg=0:46.5 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
-
Is it node 3 that is missing for you? It seems you're presenting it fine but never send the needed value for the four sensors, 0-3, on the node.
Then you also have node 1 with two sensors 0 and 2 that seems to update, but you haven't posted the beginning of the log where those are presented or loaded from persistence. I'm also missing the gateway started confirmation in the log.
-
the file /home/pi/.homeassistant/home-assistant.log has no errors in it, and it's all of my nodes that are missing (1 through 4 and 6), Node 5 isn't online right now.
Is that what you are looking for at the top?
INFO:homeassistant.components.recorder:Closing database pi@home-assistant:~/.homeassistant $ clear pi@home-assistant:~/.homeassistant $ hass Config directory: /home/pi/.homeassistant WARNING:homeassistant.bootstrap:Colorlog package not found, console coloring disabled INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=turn_off> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=turn_on> INFO:homeassistant.bootstrap:Home Assistant core initialized INFO:homeassistant.loader:Loaded mysensors from homeassistant.components.mysensors INFO:homeassistant.loader:Loaded media_player from homeassistant.components.media_player INFO:homeassistant.loader:Loaded sun from homeassistant.components.sun INFO:homeassistant.loader:Loaded updater from homeassistant.components.updater INFO:homeassistant.loader:Loaded discovery from homeassistant.components.discovery INFO:homeassistant.loader:Loaded conversation from homeassistant.components.conversation INFO:homeassistant.loader:Loaded frontend from homeassistant.components.frontend INFO:homeassistant.loader:Loaded api from homeassistant.components.api INFO:homeassistant.loader:Loaded http from homeassistant.components.http INFO:homeassistant.loader:Loaded logbook from homeassistant.components.logbook INFO:homeassistant.loader:Loaded recorder from homeassistant.components.recorder INFO:homeassistant.loader:Loaded history from homeassistant.components.history INFO:homeassistant.loader:Loaded camera from homeassistant.components.camera INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=recorder> INFO:homeassistant.loader:Loaded sensor from homeassistant.components.sensor INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=sensor> INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=mysensors.sensors, discovered=> INFO:homeassistant.loader:Loaded switch from homeassistant.components.switch INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=switch, service=turn_off> INFO:homeassistant.loader:Loaded sensor.mysensors from homeassistant.components.sensor.mysensors INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=switch, service=turn_on> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=switch> INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=mysensors.switches, discovered=> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=mysensors> INFO:homeassistant.loader:Loaded switch.mysensors from homeassistant.components.switch.mysensors INFO:homeassistant.loader:Loaded media_player.squeezebox from homeassistant.components.media_player.squeezebox INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state media_player.airspeaker=off; friendly_name=AirSpeaker, supported_media_commands=447 @ 17:05:03 24-01-2016>, entity_id=media_player.airspeaker> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=media_play> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=volume_down> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=media_play_pause> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=media_pause> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=volume_up> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=media_previous_track> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=turn_off> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=play_media> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=media_next_track> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=turn_on> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=volume_set> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=volume_mute> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=media_seek> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=start_fireplace> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=start_epic_sax> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=play_youtube_video> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=play_media> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=media_player> INFO:urllib3.connectionpool:Starting new HTTP connection (1): maps.googleapis.com INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state sun.sun=above_horizon; next_setting=21:15:13 24-01-2016, next_rising=11:43:05 25-01-2016, friendly_name=Sun, elevation=1.17 @ 17:05:03 24-01-2016>, entity_id=sun.sun> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=sun> INFO:urllib3.connectionpool:Starting new HTTPS connection (1): pypi.python.org INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=updater> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=discovery> /home/pi/.homeassistant/lib/fuzzywuzzy/fuzz.py:33: UserWarning: Using slow pure-python SequenceMatcher. Install python-Levenshtein to remove this warning warnings.warn('Using slow pure-python SequenceMatcher. Install python-Levenshtein to remove this warning') INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=conversation, service=process> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=conversation> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=http> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=api> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=frontend> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=logbook> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=history> INFO:homeassistant.loader:Loaded camera.mjpeg from homeassistant.components.camera.mjpeg INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; friendly_name=LivingRoom Camera, entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453669504.2007444 @ 17:05:04 24-01-2016>, entity_id=camera.livingroom_camera> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=camera> INFO:homeassistant.core:Starting Home Assistant (17 threads) INFO:homeassistant.core:Bus:Handling <Event homeassistant_start[L]> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=stop> INFO:mysensors.mysensors:Trying to connect to /dev/ttyUSB0 INFO:homeassistant.core:Timer:starting INFO:homeassistant.components.http:Starting web interface at http://0.0.0.0:8123 INFO:homeassistant.components.mysensors:update persistence: node 2 INFO:homeassistant.components.mysensors:No sketch_name: node 2 INFO:homeassistant.components.mysensors:No sketch_name: node 2 INFO:homeassistant.components.mysensors:update persistence: node 3 INFO:netdisco.service:Scanning INFO:homeassistant.components.http:"GET /api/stream?api_password=no_password_set&restrict=state_changed,component_loaded,service_registered HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /api/bootstrap HTTP/1.1" 200 - INFO:mysensors.mysensors:/dev/ttyUSB0 is open... INFO:mysensors.mysensors:Connected to /dev/ttyUSB0 WARNING:mysensors.mysensors:Error decoding message from gateway, probably received bad byte. INFO:homeassistant.components.media_player:Updating media_player entities INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.4 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.1 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.113 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.113 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.101 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.142 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.199 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.102 INFO:homeassistant.components.discovery:Found new service: DLNA http://192.168.86.4:32469/DeviceDescription.xml INFO:homeassistant.components.discovery:Found new service: DLNA http://192.168.86.113:9000/plugins/UPnP/MediaServer.xml INFO:homeassistant.components.discovery:Found new service: google_cast ('192.168.86.101', 8009) INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=google_cast, discovered=('192.168.86.101', 8009)> INFO:homeassistant.components.discovery:Found new service: google_cast ('192.168.86.102', 8009) INFO:homeassistant.loader:Loaded media_player.cast from homeassistant.components.media_player.cast INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=google_cast, discovered=('192.168.86.102', 8009)> INFO:homeassistant.components.discovery:Found new service: belkin_wemo ('Christmas Tree Lights', 'Insight', 'http://192.168.86.111:49153/setup.xml', '94103E395F2C') INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=belkin_wemo, discovered=('Christmas Tree Lights', 'Insight', 'http://192.168.86.111:49153/setup.xml', '94103E395F2C')> INFO:homeassistant.components.discovery:Found new service: belkin_wemo ('CatFan', 'Socket', 'http://192.168.86.108:49153/setup.xml', '94103E30CDBC') INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=belkin_wemo, discovered=('CatFan', 'Socket', 'http://192.168.86.108:49153/setup.xml', '94103E30CDBC')> INFO:homeassistant.components.discovery:Found new service: belkin_wemo ('LivingRoomLamp', 'Socket', 'http://192.168.86.163:49153/setup.xml', '94103E30C688') INFO:homeassistant.loader:Loaded switch.wemo from homeassistant.components.switch.wemo INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=belkin_wemo, discovered=('LivingRoomLamp', 'Socket', 'http://192.168.86.163:49153/setup.xml', '94103E30C688')> INFO:homeassistant.loader:Loaded switch.wemo from homeassistant.components.switch.wemo ERROR:homeassistant.components.switch:Error while setting up platform wemo Traceback (most recent call last): File "/usr/local/lib/python3.4/dist-packages/homeassistant/helpers/entity_component.py", line 145, in _setup_platform self.hass, platform_config, self.add_entities, discovery_info) File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/switch/wemo.py", line 25, in setup_platform import pywemo.discovery as discovery AttributeError: 'module' object has no attribute 'discovery' ERROR:homeassistant.components.switch:Error while setting up platform wemo Traceback (most recent call last): File "/usr/local/lib/python3.4/dist-packages/homeassistant/helpers/entity_component.py", line 145, in _setup_platform self.hass, platform_config, self.add_entities, discovery_info) File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/switch/wemo.py", line 25, in setup_platform import pywemo.discovery as discovery AttributeError: 'module' object has no attribute 'discovery' ERROR:homeassistant.components.switch:Error while setting up platform wemo Traceback (most recent call last): File "/usr/local/lib/python3.4/dist-packages/homeassistant/helpers/entity_component.py", line 145, in _setup_platform self.hass, platform_config, self.add_entities, discovery_info) File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/switch/wemo.py", line 25, in setup_platform import pywemo.discovery as discovery AttributeError: 'module' object has no attribute 'discovery' INFO:pychromecast:Querying device status INFO:pychromecast:Querying device status INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.102 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.101 INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state media_player.man_cave=off; friendly_name=Man Cave, supported_media_commands=1021 @ 17:05:19 24-01-2016>, entity_id=media_player.man_cave> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state media_player.master_bedroom=off; friendly_name=Master Bedroom, supported_media_commands=1021 @ 17:05:19 24-01-2016>, entity_id=media_player.master_bedroom> INFO:homeassistant.components.discovery:Found new service: plex_mediaserver ('Rocknet Server', 'https://192.168.86.4:32400') INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=plex_mediaserver, discovered=('Rocknet Server', 'https://192.168.86.4:32400')> INFO:homeassistant.components.discovery:Found new service: philips_hue ('Philips hue (192.168.86.199)', 'http://192.168.86.199:80/') INFO:homeassistant.loader:Loaded media_player.plex from homeassistant.components.media_player.plex INFO:homeassistant.loader:Loaded light from homeassistant.components.light INFO:homeassistant.components.media_player:Updating media_player entities INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=light, service=turn_on> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=light, service=turn_off> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=light> INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=philips_hue, discovered=('Philips hue (192.168.86.199)', 'http://192.168.86.199:80/')> INFO:homeassistant.loader:Loaded light.hue from homeassistant.components.light.hue INFO:phue:Attempting to connect to the bridge... INFO:phue:Using ip: 192.168.86.199 INFO:phue:Using username from config: 30f609e6210320e41f0dfc32220a525f Exception in thread Thread-25: Traceback (most recent call last): File "/usr/lib/python3.4/threading.py", line 920, in _bootstrap_inner self.run() File "/home/pi/.homeassistant/lib/zeroconf.py", line 1063, in run handler(self.zc) File "/home/pi/.homeassistant/lib/zeroconf.py", line 1014, in <lambda> state_change=state_change, File "/home/pi/.homeassistant/lib/zeroconf.py", line 931, in fire h(**kwargs) File "/home/pi/.homeassistant/lib/zeroconf.py", line 989, in on_change listener.add_service(*args) File "/home/pi/.homeassistant/lib/netdisco/discoverables/__init__.py", line 84, in add_service service = zconf.get_service_info(typ, name) File "/home/pi/.homeassistant/lib/zeroconf.py", line 1404, in get_service_info if info.request(self, timeout): File "/home/pi/.homeassistant/lib/zeroconf.py", line 1221, in request zc.send(out) File "/home/pi/.homeassistant/lib/zeroconf.py", line 1663, in send bytes_sent = s.sendto(packet, 0, (addr, port)) OSError: [Errno 9] Bad file descriptor INFO:plexapi:GET http://192.168.86.4:32400/ INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.4 INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.master_bedroom_1=off; friendly_name=Master bedroom 1 @ 17:05:20 24-01-2016>, entity_id=light.master_bedroom_1> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.master_bedroom_2=off; friendly_name=Master bedroom 2 @ 17:05:20 24-01-2016>, entity_id=light.master_bedroom_2> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.aprils_lamp=off; friendly_name=April's lamp @ 17:05:20 24-01-2016>, entity_id=light.aprils_lamp> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.living_room_light_1=off; friendly_name=Living room light 1 @ 17:05:20 24-01-2016>, entity_id=light.living_room_light_1> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.master_bedroom_light_strip=off; friendly_name=Master bedroom light strip @ 17:05:20 24-01-2016>, entity_id=light.master_bedroom_light_strip> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.living_room_light_2=off; friendly_name=Living room light 2 @ 17:05:20 24-01-2016>, entity_id=light.living_room_light_2> INFO:homeassistant.components.media_player.plex:Connected to: htts://192.168.86.4:32400 INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.master_bedroom_3=off; friendly_name=Master bedroom 3 @ 17:05:20 24-01-2016>, entity_id=light.master_bedroom_3> INFO:plexapi:GET http://192.168.86.4:32400/clients INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_lights=unknown; entity_id=[], friendly_name=all lights, auto=True @ 17:05:20 24-01-2016>, entity_id=group.all_lights> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_lights=off; entity_id=('light.living_room_light_1', 'light.living_room_light_2', 'light.master_bedroom_3', 'light.master_bedroom_2', 'light.master_bedroom_1', 'light.master_bedroom_light_strip', 'light.aprils_lamp'), friendly_name=all lights, auto=True @ 17:05:20 24-01-2016>, entity_id=group.all_lights> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.4 INFO:plexapi:GET http://192.168.86.4:32400/status/sessions INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.4 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1 INFO:homeassistant.components.camera:Updating camera entities INFO:homeassistant.components.light:Updating light entities INFO:homeassistant.components.media_player:Updating media_player entities INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; friendly_name=LivingRoom Camera, entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453669530.5242217 @ 17:05:04 24-01-2016>, entity_id=camera.livingroom_camera, old_state=<state camera.livingroom_camera=idle; friendly_name=LivingRoom Camera, entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453669504.2007444 @ 17:05:04 24-01-2016>> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state sun.sun=above_horizon; next_setting=21:15:13 24-01-2016, next_rising=11:43:05 25-01-2016, friendly_name=Sun, elevation=1.1 @ 17:05:03 24-01-2016>, entity_id=sun.sun, old_state=<state sun.sun=above_horizon; next_setting=21:15:13 24-01-2016, next_rising=11:43:05 25-01-2016, friendly_name=Sun, elevation=1.17 @ 17:05:03 24-01-2016>> INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=255,c=0,t=17,pt=0,l=5,sg=0:1.5.1 INFO:homeassistant.components.mysensors:update sensor_update: node 3 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:send: 0-0-3-3 s=255,c=3,t=6,pt=0,l=1,sg=0,st=ok:M INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=255,c=3,t=11,pt=0,l=25,sg=0:2 Door bell/chime INFO:homeassistant.components.mysensors:update sensor_update: node 3 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=255,c=3,t=12,pt=0,l=3,sg=0:1.0 INFO:homeassistant.components.mysensors:update sensor_update: node 3 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=1,c=0,t=3,pt=0,l=0,sg=0: INFO:homeassistant.components.mysensors:update sensor_update: node 3 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=0,c=0,t=1,pt=0,l=0,sg=0: INFO:homeassistant.components.mysensors:update sensor_update: node 3 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=3,c=0,t=3,pt=0,l=0,sg=0: INFO:homeassistant.components.mysensors:update sensor_update: node 3 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=2,c=0,t=1,pt=0,l=0,sg=0: INFO:homeassistant.components.mysensors:update sensor_update: node 3 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117 INFO:homeassistant.components.media_player:Updating media_player entities INFO:homeassistant.components.http:"GET /states HTTP/1.1" 200 - INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1 INFO:homeassistant.components.http:"GET /static/frontend-1003c31441ec44b3db84b49980f736a7.html HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /static/favicon-192x192.png HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /static/favicon.ico HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /api/bootstrap HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /api/stream?api_password=no_password_set&restrict=state_changed,component_loaded,service_registered HTTP/1.1" 200 - INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117 INFO:homeassistant.core:Bus:Handling <Event call_service[L]: domain=homeassistant, entity_id=light.living_room_light_1, service_call_id=1981876976-1, service=turn_on> INFO:homeassistant.loader:Loaded group from homeassistant.components.group INFO:homeassistant.core:Bus:Handling <Event call_service[L]: domain=light, entity_id=['light.living_room_light_1'], service_call_id=1981876976-2, service=turn_on> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.living_room_light_1=on; brightness=254, friendly_name=Living room light 1 @ 17:05:47 24-01-2016>, entity_id=light.living_room_light_1, old_state=<state light.living_room_light_1=off; friendly_name=Living room light 1 @ 17:05:20 24-01-2016>> INFO:homeassistant.core:Bus:Handling <Event service_executed[L]: service_call_id=1981876976-2> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_lights=on; entity_id=('light.living_room_light_1', 'light.living_room_light_2', 'light.master_bedroom_3', 'light.master_bedroom_2', 'light.master_bedroom_1', 'light.master_bedroom_light_strip', 'light.aprils_lamp'), friendly_name=all lights, auto=True @ 17:05:47 24-01-2016>, entity_id=group.all_lights, old_state=<state group.all_lights=off; entity_id=('light.living_room_light_1', 'light.living_room_light_2', 'light.master_bedroom_3', 'light.master_bedroom_2', 'light.master_bedroom_1', 'light.master_bedroom_light_strip', 'light.aprils_lamp'), friendly_name=all lights, auto=True @ 17:05:20 24-01-2016>> INFO:homeassistant.core:Bus:Handling <Event service_executed[L]: service_call_id=1981876976-1> INFO:homeassistant.components.api:Found broken event stream to 192.168.86.162, cleaning up INFO:homeassistant.components.http:"POST /api/services/homeassistant/turn_on HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /api/history/period?filter_entity_id=light.living_room_light_2 HTTP/1.1" 200 - INFO:homeassistant.core:Bus:Handling <Event call_service[L]: domain=homeassistant, entity_id=light.living_room_light_2, service_call_id=1981876976-3, service=turn_on> INFO:homeassistant.core:Bus:Handling <Event call_service[L]: domain=light, entity_id=['light.living_room_light_2'], service_call_id=1981876976-4, service=turn_on> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.living_room_light_2=on; brightness=254, friendly_name=Living room light 2 @ 17:05:49 24-01-2016>, entity_id=light.living_room_light_2, old_state=<state light.living_room_light_2=off; friendly_name=Living room light 2 @ 17:05:20 24-01-2016>> INFO:homeassistant.core:Bus:Handling <Event service_executed[L]: service_call_id=1981876976-4> INFO:homeassistant.core:Bus:Handling <Event service_executed[L]: service_call_id=1981876976-3> INFO:homeassistant.components.http:"POST /api/services/homeassistant/turn_on HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /api/history/period?filter_entity_id=light.living_room_light_1 HTTP/1.1" 200 - INFO:homeassistant.components.media_player:Updating media_player entities INFO:homeassistant.components.http:"GET /states HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /static/frontend-1003c31441ec44b3db84b49980f736a7.html HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /static/favicon-192x192.png HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /static/favicon.ico HTTP/1.1" 200 - INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1 INFO:homeassistant.components.http:"GET /api/bootstrap HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /api/stream?api_password=no_password_set&restrict=state_changed,component_loaded,service_registered HTTP/1.1" 200 - INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117 INFO:homeassistant.components.http:"GET /api/error_log HTTP/1.1" 200 - INFO:homeassistant.components.camera:Updating camera entities INFO:homeassistant.components.light:Updating light entities INFO:homeassistant.components.media_player:Updating media_player entities INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; friendly_name=LivingRoom Camera, entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453669560.5092123 @ 17:05:04 24-01-2016>, entity_id=camera.livingroom_camera, old_state=<state camera.livingroom_camera=idle; friendly_name=LivingRoom Camera, entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453669530.5242217 @ 17:05:04 24-01-2016>> INFO:homeassistant.components.http:"GET /devInfo HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /static/frontend-1003c31441ec44b3db84b49980f736a7.html HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /static/favicon-192x192.png HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /static/favicon.ico HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /api/bootstrap HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /api/stream?api_password=no_password_set&restrict=state_changed,component_loaded,service_registered HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /api/error_log HTTP/1.1" 200 - INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1 INFO:homeassistant.components.media_player:Updating media_player entities ^CINFO:homeassistant.core:Stopping INFO:homeassistant.core:Bus:Handling <Event homeassistant_stop[L]> INFO:mysensors.mysensors:Disconnecting from /dev/ttyUSB0 INFO:mysensors.mysensors:Stopping thread INFO:homeassistant.components.recorder:Closing database pi@home-assistant:~/.homeassistant $
-
I'm still trying to get this to work, with mixed results. Noticed on startup sometimes that HA was starting before my Serial port was initialized. Added a .timer file to delay the start of HA until the Pi is fully booted. Still having problems, but now i'm getting this in the HA logs:
16-01-24 18:37:40 homeassistant.core: BusHandler:Exception doing job Traceback (most recent call last): File "/usr/local/lib/python3.4/dist-packages/homeassistant/core.py", line 829, in job_handler func(arg) File "/usr/local/lib/python3.4/dist-packages/homeassistant/core.py", line 302, in onetime_listener listener(event) File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/mysensors.py", line 104, in gw_start gateway.event_callback('persistence', node_id) File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/mysensors.py", line 226, in node_update callback(self, node_id) File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/mysensors.py", line 165, in mysensors_callback add_devices(devices[node_id]) File "/usr/local/lib/python3.4/dist-packages/homeassistant/helpers/entity_component.py", line 81, in add_entities entity.update_ha_state() File "/usr/local/lib/python3.4/dist-packages/homeassistant/helpers/entity.py", line 108, in update_ha_state self.unit_of_measurement is not None: File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/sensor/mysensors.py", line 137, in unit_of_measurement self.value_type == self.gateway.const.SetReq.V_PERCENTAGE or \ File "/usr/lib/python3.4/enum.py", line 255, in __getattr__ raise AttributeError(name) from None AttributeError: V_PERCENTAGE 16-01-24 18:37:43 mysensors.mysensors: Error decoding message from gateway, probably received bad byte.
-
I think you need to delete the persistence file and start over and present your sensors. You should do this while looking at the output from hass so you get feedback if it's working or not.
From the top of your log output there was a warning about bad byte from the gateway. The gateway started confirmation was never logged. You should see this before you start your sensors. If you don't get the gateway confirmation, try restarting home assistant.
Also in the log, the persistence file loaded sensor 2 and 3, but some data was missing, probably. There was a note about missing sketch name for one of the sensors.
You need to present the sensors properly, including sketch name and then send one value per sensor before they show up in the gui.
-
Hey @drock1985 , would you please update the thread if you are able to work around this ? I am experiencing something similar after my latest upgrade: None of the sensors appear in the UI. I have disabled persistence and removed the json files, and presented the nodes again, but still nothing appears. In debug mode I can see the messages from the Humidity sensor, for instance, but that's all.
-
Hi @asm and @martinhjelmare
Still having issues after multiple restarts and two different nano's and NRF radios. I am like you, can see the messages but whatever I try I can't get rid of the bad byte error in the beginning.
Going to try a uno next and see if that changes anything.
-
What version of pyserial do you have installed?
pip show pyserialTry version 2.5, which has been the least buggy for me.
pip3 install pyserial==2.5pip showwill not output anything if you have version 2.5 of pyserial installed.
-
@martinhjelmare said:
pip3 install pyserial==2.5
I have 2.7 installed right now; installing 2.5 and i'll reboot and see what happens.
-
I have installed pyserial2.5, but I still get errors. This is the latest when using an Arduino Uno (not genuine, but pretty close) and I do not see the unexpected byte messages anymore. Still not getting anything to show though.
hass Config directory: /home/pi/.homeassistant WARNING:homeassistant.bootstrap:Colorlog package not found, console coloring dis abled INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeas sistant, service=turn_off> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeas sistant, service=turn_on> INFO:homeassistant.bootstrap:Home Assistant core initialized INFO:homeassistant.loader:Loaded logbook from homeassistant.components.logbook INFO:homeassistant.loader:Loaded recorder from homeassistant.components.recorder INFO:homeassistant.loader:Loaded http from homeassistant.components.http INFO:homeassistant.loader:Loaded sun from homeassistant.components.sun INFO:homeassistant.loader:Loaded updater from homeassistant.components.updater INFO:homeassistant.loader:Loaded discovery from homeassistant.components.discove ry INFO:homeassistant.loader:Loaded camera from homeassistant.components.camera INFO:homeassistant.loader:Loaded frontend from homeassistant.components.frontend INFO:homeassistant.loader:Loaded api from homeassistant.components.api INFO:homeassistant.loader:Loaded history from homeassistant.components.history INFO:homeassistant.loader:Loaded mysensors from homeassistant.components.mysenso rs INFO:homeassistant.loader:Loaded conversation from homeassistant.components.conv ersation INFO:homeassistant.loader:Loaded media_player from homeassistant.components.medi a_player INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=recor der> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=http> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=logbo ok> INFO:urllib3.connectionpool:Starting new HTTP connection (1): maps.googleapis.co m INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state s un.sun=below_horizon; elevation=-12.86, next_setting=21:17:57 26-01-2016, friend ly_name=Sun, next_rising=11:42:09 26-01-2016 @ 18:28:34 25-01-2016>, entity_id=s un.sun> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=sun> INFO:urllib3.connectionpool:Starting new HTTPS connection (1): pypi.python.org INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=updat er> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=disco very> INFO:homeassistant.loader:Loaded camera.mjpeg from homeassistant.components.came ra.mjpeg INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state c amera.livingroom_camera=idle; friendly_name=LivingRoom Camera, entity_picture=/a pi/camera_proxy/camera.livingroom_camera?time=1453760914.813284 @ 18:28:34 25-01 -2016>, entity_id=camera.livingroom_camera> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=camer a> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=api> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=front end> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=histo ry> INFO:mysensors.mysensors:File does not exist or is not readable: /home/pi/.homea ssistant/mysensors1.pickle INFO:homeassistant.loader:Loaded sensor from homeassistant.components.sensor INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=senso r> INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=myse nsors.sensors, discovered=> INFO:homeassistant.loader:Loaded switch from homeassistant.components.switch INFO:homeassistant.loader:Loaded sensor.mysensors from homeassistant.components. sensor.mysensors INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=switch , service=turn_off> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=switch , service=turn_on> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=switc h> INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=myse nsors.switches, discovered=> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=mysen sors> INFO:homeassistant.loader:Loaded switch.mysensors from homeassistant.components. switch.mysensors /home/pi/.homeassistant/lib/fuzzywuzzy/fuzz.py:33: UserWarning: Using slow pure- python SequenceMatcher. Install python-Levenshtein to remove this warning warnings.warn('Using slow pure-python SequenceMatcher. Install python-Levensht ein to remove this warning') INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=conver sation, service=process> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=conve rsation> INFO:homeassistant.loader:Loaded media_player.squeezebox from homeassistant.comp onents.media_player.squeezebox INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state m edia_player.airspeaker=off; friendly_name=AirSpeaker, supported_media_commands=4 47 @ 18:28:35 25-01-2016>, entity_id=media_player.airspeaker> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_ player, service=media_next_track> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_ player, service=media_play> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_ player, service=volume_up> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_ player, service=media_pause> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_ player, service=turn_on> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_ player, service=turn_off> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_ player, service=volume_down> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_ player, service=media_play_pause> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_ player, service=play_media> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_ player, service=media_previous_track> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_ player, service=volume_set> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_ player, service=volume_mute> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_ player, service=media_seek> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_ player, service=start_fireplace> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_ player, service=start_epic_sax> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_ player, service=play_youtube_video> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_ player, service=play_media> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=media _player> INFO:homeassistant.core:Starting Home Assistant (17 threads) INFO:homeassistant.core:Bus:Handling <Event homeassistant_start[L]> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeas sistant, service=stop> INFO:mysensors.mysensors:Trying to connect to /dev/ttyUSB0 INFO:homeassistant.components.http:Starting web interface at http://0.0.0.0:8123 INFO:homeassistant.core:Timer:starting INFO:homeassistant.components.http:"GET /api/stream?api_password=no_password_set &restrict=state_changed,component_loaded,service_registered HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /api/bootstrap HTTP/1.1" 200 - INFO:netdisco.service:Scanning INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117 INFO:mysensors.mysensors:/dev/ttyUSB0 is open... INFO:mysensors.mysensors:Connected to /dev/ttyUSB0 Exception in thread Thread-14: Traceback (most recent call last): File "/usr/lib/python3.4/threading.py", line 920, in _bootstrap_inner self.run() File "/home/pi/.homeassistant/lib/mysensors/mysensors.py", line 312, in run response = self.handle_queue() File "/home/pi/.homeassistant/lib/mysensors/mysensors.py", line 222, in handle _queue reply = func(*args, **kwargs) File "/home/pi/.homeassistant/lib/mysensors/mysensors.py", line 105, in logic msg = Message(data) File "/home/pi/.homeassistant/lib/mysensors/mysensors.py", line 397, in __init __ self.decode(data) File "/home/pi/.homeassistant/lib/mysensors/mysensors.py", line 417, in decode self.sub_type) = [int(f) for f in data] File "/home/pi/.homeassistant/lib/mysensors/mysensors.py", line 417, in <listc omp> self.sub_type) = [int(f) for f in data] ValueError: invalid literal for int() with base 10: '\x00\x00\x00\x00\x00\x00\x0 0\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x0 0\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x0 0\x00\x00\x0 INFO:homeassistant.components.media_player:Updating media_player entities INFO:homeassistant.components.http:"GET /api/error_log HTTP/1.1" 200 - INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.4 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.101 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.1 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.113 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.142 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.102 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.199 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.113 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:homeassistant.components.discovery:Found new service: philips_hue ('Philips hue (192.168.86.199)', 'http://192.168.86.199:80/') INFO:homeassistant.loader:Loaded light from homeassistant.components.light INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=light, service=turn_on> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=light, service=turn_off> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=light > INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=phil ips_hue, discovered=('Philips hue (192.168.86.199)', 'http://192.168.86.199:80/' )> INFO:homeassistant.components.discovery:Found new service: belkin_wemo ('CatFan' , 'Socket', 'http://192.168.86.108:49153/setup.xml', '94103E30CDBC') INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=belk in_wemo, discovered=('CatFan', 'Socket', 'http://192.168.86.108:49153/setup.xml' , '94103E30CDBC')> INFO:homeassistant.components.discovery:Found new service: belkin_wemo ('LivingR oomLamp', 'Socket', 'http://192.168.86.163:49153/setup.xml', '94103E30C688') INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=belk in_wemo, discovered=('LivingRoomLamp', 'Socket', 'http://192.168.86.163:49153/se tup.xml', '94103E30C688')> INFO:homeassistant.components.discovery:Found new service: DLNA http://192.168.8 6.113:9000/plugins/UPnP/MediaServer.xml INFO:homeassistant.components.discovery:Found new service: DLNA http://192.168.8 6.4:32469/DeviceDescription.xml INFO:homeassistant.loader:Loaded light.hue from homeassistant.components.light.h ue INFO:homeassistant.loader:Loaded switch.wemo from homeassistant.components.switc h.wemo INFO:homeassistant.loader:Loaded switch.wemo from homeassistant.components.switc h.wemo INFO:homeassistant.components.media_player:Updating media_player entities INFO:phue:Attempting to connect to the bridge... INFO:phue:Using ip: 192.168.86.199 INFO:phue:Using username from config: 30f609e6210320e41f0dfc32220a525f INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state l ight.aprils_lamp=off; friendly_name=April's lamp @ 18:28:50 25-01-2016>, entity_ id=light.aprils_lamp> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state l ight.master_bedroom_3=off; friendly_name=Master bedroom 3 @ 18:28:50 25-01-2016> , entity_id=light.master_bedroom_3> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state l ight.master_bedroom_2=off; friendly_name=Master bedroom 2 @ 18:28:50 25-01-2016> , entity_id=light.master_bedroom_2> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state l ight.living_room_light_2=on; brightness=254, friendly_name=Living room light 2 @ 18:28:50 25-01-2016>, entity_id=light.living_room_light_2> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state l ight.master_bedroom_1=off; friendly_name=Master bedroom 1 @ 18:28:50 25-01-2016> , entity_id=light.master_bedroom_1> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state l ight.living_room_light_1=on; brightness=254, friendly_name=Living room light 1 @ 18:28:50 25-01-2016>, entity_id=light.living_room_light_1> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state l ight.master_bedroom_light_strip=off; friendly_name=Master bedroom light strip @ 18:28:50 25-01-2016>, entity_id=light.master_bedroom_light_strip> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state g roup.all_lights=unknown; friendly_name=all lights, entity_id=[], auto=True @ 18: 28:50 25-01-2016>, entity_id=group.all_lights> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state g roup.all_lights=on; friendly_name=all lights, entity_id=('light.living_room_ligh t_1', 'light.aprils_lamp', 'light.master_bedroom_light_strip', 'light.living_roo m_light_2', 'light.master_bedroom_1', 'light.master_bedroom_2', 'light.master_be droom_3'), auto=True @ 18:28:50 25-01-2016>, entity_id=group.all_lights> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:pywemo.subscribe:Listening on port 8989 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:homeassistant.components.discovery:Found new service: plex_mediaserver ('Ro cknet Server', 'https://192.168.86.4:32400') INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=plex _mediaserver, discovered=('Rocknet Server', 'https://192.168.86.4:32400')> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:homeassistant.components.discovery:Found new service: google_cast ('192.168 .86.101', 8009) INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:homeassistant.loader:Loaded media_player.plex from homeassistant.components .media_player.plex INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=goog le_cast, discovered=('192.168.86.101', 8009)> INFO:homeassistant.components.discovery:Found new service: google_cast ('192.168 .86.142', 8009) INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=goog le_cast, discovered=('192.168.86.142', 8009)> INFO:homeassistant.components.discovery:Found new service: google_cast ('192.168 .86.102', 8009) INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=goog le_cast, discovered=('192.168.86.102', 8009)> INFO:homeassistant.loader:Loaded media_player.cast from homeassistant.components .media_player.cast INFO:homeassistant.loader:Loaded media_player.cast from homeassistant.components .media_player.cast INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:pywemo.subscribe:Subscribing to events from <WeMo Switch "CatFan"> INFO:pywemo.subscribe:Resubscribe for <WeMo Switch "CatFan"> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:pywemo.subscribe:Subscribing to events from <WeMo Switch "LivingRoomLamp"> INFO:pywemo.subscribe:Resubscribe for <WeMo Switch "LivingRoomLamp"> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state s witch.catfan=off; friendly_name=CatFan @ 18:28:51 25-01-2016>, entity_id=switch. catfan> INFO:pywemo.subscribe:Received event from <WeMo Switch "CatFan">(192.168.86.108) INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state g roup.all_switches=unknown; friendly_name=all switches, entity_id=[], auto=True @ 18:28:51 25-01-2016>, entity_id=group.all_switches> INFO:homeassistant.components.switch.wemo:Subscription update for <WeMo Switch "CatFan"> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state g roup.all_switches=off; friendly_name=all switches, entity_id=('switch.catfan',), auto=True @ 18:28:52 25-01-2016>, entity_id=group.all_switches> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state s witch.livingroomlamp=on; friendly_name=LivingRoomLamp @ 18:28:52 25-01-2016>, en tity_id=switch.livingroomlamp> INFO:pywemo.subscribe:Received event from <WeMo Switch "LivingRoomLamp">(192.168 .86.163) INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state g roup.all_switches=on; friendly_name=all switches, entity_id=('switch.catfan', 's witch.livingroomlamp'), auto=True @ 18:28:52 25-01-2016>, entity_id=group.all_sw itches> INFO:plexapi:GET http://192.168.86.4:32400/ INFO:homeassistant.components.switch.wemo:Subscription update for <WeMo Switch "LivingRoomLamp"> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.4 INFO:homeassistant.components.media_player.plex:Connected to: htts://192.168.86. 4:32400 INFO:plexapi:GET http://192.168.86.4:32400/clients INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.4 INFO:plexapi:GET http://192.168.86.4:32400/status/sessions INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.4 INFO:pychromecast:Querying device status INFO:pychromecast:Querying device status INFO:pychromecast:Querying device status INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.101 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.102 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.142 INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state m edia_player.man_cave=off; friendly_name=Man Cave, supported_media_commands=1021 @ 18:28:52 25-01-2016>, entity_id=media_player.man_cave> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state m edia_player.master_bedroom=off; friendly_name=Master Bedroom, supported_media_co mmands=1021 @ 18:28:52 25-01-2016>, entity_id=media_player.master_bedroom> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state m edia_player.living_room=off; friendly_name=Living Room, supported_media_commands =1021 @ 18:28:53 25-01-2016>, entity_id=media_player.living_room> ^CINFO:homeassistant.core:Stopping INFO:homeassistant.core:Bus:Handling <Event homeassistant_stop[L]> INFO:homeassistant.components.switch.wemo:Shutting down subscriptions. INFO:mysensors.mysensors:Disconnecting from /dev/ttyUSB0 INFO:mysensors.mysensors:Stopping thread INFO:homeassistant.components.recorder:Closing database pi@home-assistant:~ $
-
Ok, here is a better log. I decided to set up a new node, one that would auto get the node_ID to see if there was atleast some communication both ways. There seems to be, as the gateway did assign a node_ID, but it didn't show up in HA on the web at all.
Maybe I need to start HA all over again, just keep the configuration.yaml file?
pi@home-assistant:~/.homeassistant $ hass Config directory: /home/pi/.homeassistant WARNING:homeassistant.bootstrap:Colorlog package not found, console coloring disabled INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=turn_off> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=turn_on> INFO:homeassistant.bootstrap:Home Assistant core initialized INFO:homeassistant.loader:Loaded logbook from homeassistant.components.logbook INFO:homeassistant.loader:Loaded recorder from homeassistant.components.recorder INFO:homeassistant.loader:Loaded http from homeassistant.components.http INFO:homeassistant.loader:Loaded history from homeassistant.components.history INFO:homeassistant.loader:Loaded discovery from homeassistant.components.discovery INFO:homeassistant.loader:Loaded camera from homeassistant.components.camera INFO:homeassistant.loader:Loaded updater from homeassistant.components.updater INFO:homeassistant.loader:Loaded sun from homeassistant.components.sun INFO:homeassistant.loader:Loaded frontend from homeassistant.components.frontend INFO:homeassistant.loader:Loaded api from homeassistant.components.api INFO:homeassistant.loader:Loaded media_player from homeassistant.components.media_player INFO:homeassistant.loader:Loaded mysensors from homeassistant.components.mysensors INFO:homeassistant.loader:Loaded conversation from homeassistant.components.conversation INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=recorder> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=http> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=logbook> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=history> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=discovery> INFO:homeassistant.loader:Loaded camera.mjpeg from homeassistant.components.camera.mjpeg INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453761305.5420914, friendly_name=LivingRoom Camera @ 18:35:05 25-01-2016>, entity_id=camera.livingroom_camera> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=camera> INFO:urllib3.connectionpool:Starting new HTTPS connection (1): pypi.python.org INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=updater> INFO:urllib3.connectionpool:Starting new HTTP connection (1): maps.googleapis.com INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state sun.sun=below_horizon; friendly_name=Sun, next_rising=11:42:09 26-01-2016, next_setting=21:17:57 26-01-2016, elevation=-14.01 @ 18:35:11 25-01-2016>, entity_id=sun.sun> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=sun> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=api> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=frontend> INFO:homeassistant.loader:Loaded media_player.squeezebox from homeassistant.components.media_player.squeezebox INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state media_player.airspeaker=off; supported_media_commands=447, friendly_name=AirSpeaker @ 18:35:11 25-01-2016>, entity_id=media_player.airspeaker> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=media_play> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=media_pause> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=turn_on> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=play_media> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=turn_off> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=volume_up> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=volume_down> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=media_play_pause> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=media_next_track> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=media_previous_track> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=volume_set> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=volume_mute> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=media_seek> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=start_fireplace> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=start_epic_sax> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=play_youtube_video> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=play_media> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=media_player> INFO:mysensors.mysensors:File does not exist or is not readable: /home/pi/.homeassistant/mysensors1.pickle INFO:homeassistant.loader:Loaded sensor from homeassistant.components.sensor INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=sensor> INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: discovered=, service=mysensors.sensors> INFO:homeassistant.loader:Loaded switch from homeassistant.components.switch INFO:homeassistant.loader:Loaded sensor.mysensors from homeassistant.components.sensor.mysensors INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=switch, service=turn_off> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=switch, service=turn_on> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=switch> INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: discovered=, service=mysensors.switches> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=mysensors> INFO:homeassistant.loader:Loaded switch.mysensors from homeassistant.components.switch.mysensors /home/pi/.homeassistant/lib/fuzzywuzzy/fuzz.py:33: UserWarning: Using slow pure-python SequenceMatcher. Install python-Levenshtein to remove this warning warnings.warn('Using slow pure-python SequenceMatcher. Install python-Levenshtein to remove this warning') INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=conversation, service=process> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=conversation> INFO:homeassistant.core:Starting Home Assistant (17 threads) INFO:homeassistant.core:Bus:Handling <Event homeassistant_start[L]> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=stop> INFO:mysensors.mysensors:Trying to connect to /dev/ttyUSB0 INFO:homeassistant.components.http:Starting web interface at http://0.0.0.0:8123 INFO:homeassistant.core:Timer:starting INFO:homeassistant.components.http:"GET /api/stream?api_password=no_password_set&restrict=state_changed,component_loaded,service_registered HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /api/bootstrap HTTP/1.1" 200 - INFO:netdisco.service:Scanning WARNING:homeassistant.components.recorder:Found unfinished sessions INFO:mysensors.mysensors:/dev/ttyUSB0 is open... INFO:mysensors.mysensors:Connected to /dev/ttyUSB0 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:gateway started, id=0, parent=0, distance=0 INFO:homeassistant.components.media_player:Updating media_player entities INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.4 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.102 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.1 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.199 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.113 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.101 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.113 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:homeassistant.components.discovery:Found new service: DLNA http://192.168.86.4:32469/DeviceDescription.xml INFO:homeassistant.components.discovery:Found new service: DLNA http://192.168.86.113:9000/plugins/UPnP/MediaServer.xml INFO:homeassistant.components.discovery:Found new service: plex_mediaserver ('Rocknet Server', 'https://192.168.86.4:32400') INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: discovered=('Rocknet Server', 'https://192.168.86.4:32400'), service=plex_mediaserver> INFO:homeassistant.components.discovery:Found new service: google_cast ('192.168.86.102', 8009) INFO:homeassistant.loader:Loaded media_player.plex from homeassistant.components.media_player.plex INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: discovered=('192.168.86.102', 8009), service=google_cast> INFO:homeassistant.components.discovery:Found new service: google_cast ('192.168.86.142', 8009) INFO:homeassistant.loader:Loaded media_player.cast from homeassistant.components.media_player.cast INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: discovered=('192.168.86.142', 8009), service=google_cast> INFO:homeassistant.components.discovery:Found new service: google_cast ('192.168.86.101', 8009) INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: discovered=('192.168.86.101', 8009), service=google_cast> INFO:homeassistant.components.discovery:Found new service: belkin_wemo ('Christmas Tree Lights', 'Insight', 'http://192.168.86.111:49153/setup.xml', '94103E395F2C') INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: discovered=('Christmas Tree Lights', 'Insight', 'http://192.168.86.111:49153/setup.xml', '94103E395F2C'), service=belkin_wemo> INFO:homeassistant.components.discovery:Found new service: belkin_wemo ('LivingRoomLamp', 'Socket', 'http://192.168.86.163:49153/setup.xml', '94103E30C688') INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: discovered=('LivingRoomLamp', 'Socket', 'http://192.168.86.163:49153/setup.xml', '94103E30C688'), service=belkin_wemo> INFO:homeassistant.components.discovery:Found new service: belkin_wemo ('CatFan', 'Socket', 'http://192.168.86.108:49153/setup.xml', '94103E30CDBC') INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: discovered=('CatFan', 'Socket', 'http://192.168.86.108:49153/setup.xml', '94103E30CDBC'), service=belkin_wemo> INFO:homeassistant.components.discovery:Found new service: philips_hue ('Philips hue (192.168.86.199)', 'http://192.168.86.199:80/') INFO:homeassistant.loader:Loaded switch.wemo from homeassistant.components.switch.wemo INFO:homeassistant.loader:Loaded switch.wemo from homeassistant.components.switch.wemo INFO:homeassistant.loader:Loaded switch.wemo from homeassistant.components.switch.wemo INFO:homeassistant.loader:Loaded light from homeassistant.components.light INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=light, service=turn_on> INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=light, service=turn_off> INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=light> INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: discovered=('Philips hue (192.168.86.199)', 'http://192.168.86.199:80/'), service=philips_hue> INFO:homeassistant.loader:Loaded light.hue from homeassistant.components.light.hue INFO:phue:Attempting to connect to the bridge... INFO:phue:Using ip: 192.168.86.199 INFO:phue:Using username from config: 30f609e6210320e41f0dfc32220a525f INFO:plexapi:GET http://192.168.86.4:32400/ INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.4 INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.master_bedroom_1=off; friendly_name=Master bedroom 1 @ 18:35:27 25-01-2016>, entity_id=light.master_bedroom_1> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.aprils_lamp=off; friendly_name=April's lamp @ 18:35:27 25-01-2016>, entity_id=light.aprils_lamp> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.master_bedroom_2=off; friendly_name=Master bedroom 2 @ 18:35:27 25-01-2016>, entity_id=light.master_bedroom_2> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.master_bedroom_light_strip=off; friendly_name=Master bedroom light strip @ 18:35:27 25-01-2016>, entity_id=light.master_bedroom_light_strip> INFO:homeassistant.components.media_player.plex:Connected to: htts://192.168.86.4:32400 INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.living_room_light_2=on; brightness=254, friendly_name=Living room light 2 @ 18:35:27 25-01-2016>, entity_id=light.living_room_light_2> INFO:plexapi:GET http://192.168.86.4:32400/clients INFO:pywemo.subscribe:Listening on port 8989 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.master_bedroom_3=off; friendly_name=Master bedroom 3 @ 18:35:27 25-01-2016>, entity_id=light.master_bedroom_3> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.4 INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.living_room_light_1=on; brightness=254, friendly_name=Living room light 1 @ 18:35:27 25-01-2016>, entity_id=light.living_room_light_1> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_lights=unknown; entity_id=[], auto=True, friendly_name=all lights @ 18:35:27 25-01-2016>, entity_id=group.all_lights> INFO:plexapi:GET http://192.168.86.4:32400/status/sessions INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_lights=on; entity_id=('light.aprils_lamp', 'light.master_bedroom_1', 'light.living_room_light_1', 'light.living_room_light_2', 'light.master_bedroom_light_strip', 'light.master_bedroom_3', 'light.master_bedroom_2'), auto=True, friendly_name=all lights @ 18:35:27 25-01-2016>, entity_id=group.all_lights> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.4 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 ERROR:homeassistant.components.media_player:Error while setting up platform cast Traceback (most recent call last): File "/usr/local/lib/python3.4/dist-packages/homeassistant/helpers/entity_component.py", line 145, in _setup_platform self.hass, platform_config, self.add_entities, discovery_info) File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/media_player/cast.py", line 39, in setup_platform import pychromecast File "/home/pi/.homeassistant/lib/pychromecast/__init__.py", line 14, in <module> from . import socket_client ImportError: cannot import name 'socket_client' INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 ERROR:homeassistant.components.media_player:Error while setting up platform cast Traceback (most recent call last): File "/usr/local/lib/python3.4/dist-packages/homeassistant/helpers/entity_component.py", line 145, in _setup_platform self.hass, platform_config, self.add_entities, discovery_info) File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/media_player/cast.py", line 39, in setup_platform import pychromecast File "/home/pi/.homeassistant/lib/pychromecast/__init__.py", line 14, in <module> from . import socket_client ImportError: cannot import name 'socket_client' ERROR:homeassistant.components.media_player:Error while setting up platform cast Traceback (most recent call last): File "/usr/local/lib/python3.4/dist-packages/homeassistant/helpers/entity_component.py", line 145, in _setup_platform self.hass, platform_config, self.add_entities, discovery_info) File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/media_player/cast.py", line 68, in setup_platform casts.append(CastDevice(host)) File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/media_player/cast.py", line 84, in __init__ import pychromecast.controllers.youtube as youtube AttributeError: 'module' object has no attribute 'controllers' INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:pywemo.subscribe:Subscribing to events from <WeMo Switch "CatFan"> INFO:pywemo.subscribe:Resubscribe for <WeMo Switch "CatFan"> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state switch.catfan=off; friendly_name=CatFan @ 18:35:29 25-01-2016>, entity_id=switch.catfan> INFO:pywemo.subscribe:Received event from <WeMo Switch "CatFan">(192.168.86.108) INFO:pywemo.subscribe:Subscribing to events from <WeMo Switch "LivingRoomLamp"> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_switches=unknown; entity_id=[], auto=True, friendly_name=all switches @ 18:35:29 25-01-2016>, entity_id=group.all_switches> INFO:homeassistant.components.switch.wemo:Subscription update for <WeMo Switch "CatFan"> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_switches=off; entity_id=('switch.catfan',), auto=True, friendly_name=all switches @ 18:35:29 25-01-2016>, entity_id=group.all_switches> INFO:pywemo.subscribe:Subscribing to events from <WeMo Insight "Christmas Tree Lights"> INFO:pywemo.subscribe:Resubscribe for <WeMo Switch "LivingRoomLamp"> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:pywemo.subscribe:Resubscribe for <WeMo Insight "Christmas Tree Lights"> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state switch.livingroomlamp=on; friendly_name=LivingRoomLamp @ 18:35:29 25-01-2016>, entity_id=switch.livingroomlamp> INFO:pywemo.subscribe:Received event from <WeMo Switch "LivingRoomLamp">(192.168.86.163) INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_switches=on; entity_id=('switch.livingroomlamp', 'switch.catfan'), auto=True, friendly_name=all switches @ 18:35:29 25-01-2016>, entity_id=group.all_switches> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:homeassistant.components.switch.wemo:Subscription update for <WeMo Switch "LivingRoomLamp"> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state switch.christmas_tree_lights=off; friendly_name=Christmas Tree Lights @ 18:35:29 25-01-2016>, entity_id=switch.christmas_tree_lights> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_switches=on; entity_id=('switch.livingroomlamp', 'switch.christmas_tree_lights', 'switch.catfan'), auto=True, friendly_name=all switches @ 18:35:29 25-01-2016>, entity_id=group.all_switches> INFO:pywemo.subscribe:Received event from <WeMo Insight "Christmas Tree Lights">(192.168.86.111) INFO:homeassistant.components.switch.wemo:Subscription update for <WeMo Insight "Christmas Tree Lights"> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:homeassistant.components.media_player:Updating media_player entities INFO:homeassistant.components.light:Updating light entities INFO:homeassistant.components.camera:Updating camera entities INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453761330.5161493, friendly_name=LivingRoom Camera @ 18:35:05 25-01-2016>, entity_id=camera.livingroom_camera, old_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453761305.5420914, friendly_name=LivingRoom Camera @ 18:35:05 25-01-2016>> INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state sun.sun=below_horizon; friendly_name=Sun, next_rising=11:42:09 26-01-2016, next_setting=21:17:57 26-01-2016, elevation=-14.07 @ 18:35:11 25-01-2016>, entity_id=sun.sun, old_state=<state sun.sun=below_horizon; friendly_name=Sun, next_rising=11:42:09 26-01-2016, next_setting=21:17:57 26-01-2016, elevation=-14.01 @ 18:35:11 25-01-2016>> INFO:pywemo.subscribe:Received event from <WeMo Insight "Christmas Tree Lights">(192.168.86.111) INFO:homeassistant.components.switch.wemo:Subscription update for <WeMo Insight "Christmas Tree Lights"> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 INFO:homeassistant.components.media_player:Updating media_player entities INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=0,t=17,pt=0,l=5,sg=0:1.5.1 INFO:homeassistant.components.mysensors:update sensor_update: node 1 INFO:homeassistant.components.mysensors:No sketch_name: node 1 INFO:homeassistant.components.mysensors:No sketch_name: node 1 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:send: 0-0-1-1 s=255,c=3,t=6,pt=0,l=1,sg=0,st=ok:M INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=11,pt=0,l=13,sg=0:Motion Sensor INFO:homeassistant.components.mysensors:update sensor_update: node 1 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=12,pt=0,l=3,sg=0:1.0 INFO:homeassistant.components.mysensors:update sensor_update: node 1 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=1,c=0,t=1,pt=0,l=0,sg=0: INFO:homeassistant.components.mysensors:update sensor_update: node 1 INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=1,c=1,t=16,pt=0,l=1,sg=0:1 INFO:homeassistant.components.mysensors:update sensor_update: node 1 INFO:homeassistant.components.media_player:Updating media_player entities INFO:homeassistant.components.http:"GET /api/error_log HTTP/1.1" 200 - INFO:homeassistant.components.media_player:Updating media_player entities INFO:homeassistant.components.light:Updating light entities INFO:homeassistant.components.camera:Updating camera entities INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453761360.5125034, friendly_name=LivingRoom Camera @ 18:35:05 25-01-2016>, entity_id=camera.livingroom_camera, old_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453761330.5161493, friendly_name=LivingRoom Camera @ 18:35:05 25-01-2016>> INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117 INFO:homeassistant.components.media_player:Updating media_player entities INFO:homeassistant.components.http:"GET /states HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /static/frontend-1003c31441ec44b3db84b49980f736a7.html HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /static/favicon-192x192.png HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /static/favicon.ico HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /api/bootstrap HTTP/1.1" 200 - INFO:homeassistant.components.http:"GET /api/stream?api_password=no_password_set&restrict=state_changed,component_loaded,service_registered HTTP/1.1" 200 - INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117 INFO:homeassistant.components.http:"GET /api/error_log HTTP/1.1" 200 - ^CINFO:homeassistant.core:Stopping INFO:homeassistant.core:Bus:Handling <Event homeassistant_stop[L]> INFO:homeassistant.components.switch.wemo:Shutting down subscriptions. INFO:mysensors.mysensors:Disconnecting from /dev/ttyUSB0 INFO:mysensors.mysensors:Stopping thread INFO:homeassistant.components.recorder:Closing database pi@home-assistant:~/.homeassistant $
-
@drock1985 Interesting ! I restarted a few times too with persistence enabled and at some point the json file gets populated. Another restart and the sensor appears in the UI ...
-
Hi @asm
Glad to hear you had some luck. I'm getting closer (i think), getting different errors in the log now. The Motion sensor shows up in terminal, and even identifies it just not in the GUI.
ARG! I bet it is something so small it's not funny anymore!
Jan 25 19:03:23 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTPS connection (1): pypi.python.org Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=updater> Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=history> Jan 25 19:03:24 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): maps.googleapis.com Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: entity_id=sun.sun, new_state=<state sun.sun=below_horizon; elevation=-18.97, next_setting=21:17:57 26-01-2016, friendly_name=Sun, next_rising=11:42:09 26-01-2016 @ 19:03:24 25-01-2016>> Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=sun> Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.loader:Loaded sensor from homeassistant.components.sensor Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=sensor> Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=mysensors.sensors, discovered=> Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.loader:Loaded sensor.mysensors from homeassistant.components.sensor.mysensors Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.loader:Loaded switch from homeassistant.components.switch Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: service=turn_off, domain=switch> Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: service=turn_on, domain=switch> Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=switch> Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=mysensors.switches, discovered=> Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=mysensors> Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.loader:Loaded switch.mysensors from homeassistant.components.switch.mysensors Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=discovery> Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.core:Starting Home Assistant (17 threads) Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event homeassistant_start[L]> Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: service=stop, domain=homeassistant> Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.components.http:Starting web interface at http://0.0.0.0:8123 Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.core:Timer:starting Jan 25 19:03:24 home-assistant hass[1416]: INFO:mysensors.mysensors:Trying to connect to /dev/ttyUSB0 Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.components.mysensors:update persistence: node 1 Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.components.mysensors:No sketch_name: node 1 Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.components.http:"GET /api/stream?api_password=no_password_set&restrict=state_changed,component_loaded,service_registered HTTP/1.1" 200 - Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.components.mysensors:No sketch_name: node 1 Jan 25 19:03:24 home-assistant hass[1416]: INFO:netdisco.service:Scanning Jan 25 19:03:24 home-assistant hass[1416]: INFO:homeassistant.components.http:"GET /api/bootstrap HTTP/1.1" 200 - Jan 25 19:03:27 home-assistant hass[1416]: INFO:mysensors.mysensors:/dev/ttyUSB0 is open... Jan 25 19:03:27 home-assistant hass[1416]: INFO:mysensors.mysensors:Connected to /dev/ttyUSB0 Jan 25 19:03:27 home-assistant hass[1416]: INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:gateway started, id=0, parent=0, distance=0 Jan 25 19:03:30 home-assistant hass[1416]: INFO:homeassistant.components.media_player:Updating media_player entities Jan 25 19:03:30 home-assistant hass[1416]: INFO:homeassistant.components.camera:Updating camera entities Jan 25 19:03:30 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: old_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453763003.501535, friendly_name=LivingRoom Camera @ 19:03:23 25-01-2016>, entity_id=camera.livingroom_camera, new_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453763010.532438, friendly_name=LivingRoom Camera @ 19:03:23 25-01-2016>> Jan 25 19:03:30 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: old_state=<state sun.sun=below_horizon; elevation=-18.97, next_setting=21:17:57 26-01-2016, friendly_name=Sun, next_rising=11:42:09 26-01-2016 @ 19:03:24 25-01-2016>, entity_id=sun.sun, new_state=<state sun.sun=below_horizon; elevation=-18.99, next_setting=21:17:57 26-01-2016, friendly_name=Sun, next_rising=11:42:09 26-01-2016 @ 19:03:24 25-01-2016>> Jan 25 19:03:37 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.1 Jan 25 19:03:37 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.101 Jan 25 19:03:37 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.113 Jan 25 19:03:38 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.142 Jan 25 19:03:38 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.199 Jan 25 19:03:38 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.113 Jan 25 19:03:38 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.102 Jan 25 19:03:38 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108 Jan 25 19:03:38 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 Jan 25 19:03:38 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111 Jan 25 19:03:38 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.4 Jan 25 19:03:38 home-assistant hass[1416]: INFO:homeassistant.components.discovery:Found new service: DLNA http://192.168.86.113:9000/plugins/UPnP/MediaServer.xml Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.components.discovery:Found new service: plex_mediaserver ('Rocknet Server', 'https://192.168.86.4:32400') Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=plex_mediaserver, discovered=('Rocknet Server', 'https://192.168.86.4:32400')> Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.components.discovery:Found new service: google_cast ('192.168.86.142', 8009) Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=google_cast, discovered=('192.168.86.142', 8009)> Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.components.discovery:Found new service: google_cast ('192.168.86.101', 8009) Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=google_cast, discovered=('192.168.86.101', 8009)> Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.components.discovery:Found new service: google_cast ('192.168.86.102', 8009) Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=google_cast, discovered=('192.168.86.102', 8009)> Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.components.discovery:Found new service: belkin_wemo ('LivingRoomLamp', 'Socket', 'http://192.168.86.163:49153/setup.xml', '94103E30C688') Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=belkin_wemo, discovered=('LivingRoomLamp', 'Socket', 'http://192.168.86.163:49153/setup.xml', '94103E30C688')> Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.loader:Loaded media_player.plex from homeassistant.components.media_player.plex Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.loader:Loaded media_player.cast from homeassistant.components.media_player.cast Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.loader:Loaded media_player.cast from homeassistant.components.media_player.cast Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.loader:Loaded media_player.cast from homeassistant.components.media_player.cast Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.components.discovery:Found new service: belkin_wemo ('Christmas Tree Lights', 'Insight', 'http://192.168.86.111:49153/setup.xml', '94103E395F2C') Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=belkin_wemo, discovered=('Christmas Tree Lights', 'Insight', 'http://192.168.86.111:49153/setup.xml', '94103E395F2C')> Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.loader:Loaded switch.wemo from homeassistant.components.switch.wemo Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.components.discovery:Found new service: belkin_wemo ('CatFan', 'Socket', 'http://192.168.86.108:49153/setup.xml', '94103E30CDBC') Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.loader:Loaded switch.wemo from homeassistant.components.switch.wemo Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=belkin_wemo, discovered=('CatFan', 'Socket', 'http://192.168.86.108:49153/setup.xml', '94103E30CDBC')> Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.components.discovery:Found new service: philips_hue ('Philips hue (192.168.86.199)', 'http://192.168.86.199:80/') Jan 25 19:03:39 home-assistant hass[1416]: INFO:homeassistant.loader:Loaded light from homeassistant.components.light Jan 25 19:03:40 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: service=turn_on, domain=light> Jan 25 19:03:40 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: service=turn_off, domain=light> Jan 25 19:03:40 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=light> Jan 25 19:03:40 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=philips_hue, discovered=('Philips hue (192.168.86.199)', 'http://192.168.86.199:80/')> Jan 25 19:03:40 home-assistant hass[1416]: INFO:homeassistant.loader:Loaded light.hue from homeassistant.components.light.hue Jan 25 19:03:40 home-assistant hass[1416]: INFO:phue:Attempting to connect to the bridge... Jan 25 19:03:40 home-assistant hass[1416]: INFO:phue:Using ip: 192.168.86.199 Jan 25 19:03:40 home-assistant hass[1416]: INFO:phue:Using username from config: 30f609e6210320e41f0dfc32220a525f Jan 25 19:03:40 home-assistant hass[1416]: INFO:plexapi:GET http://192.168.86.4:32400/ Jan 25 19:03:40 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.4 Jan 25 19:03:40 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: entity_id=light.master_bedroom_1, new_state=<state light.master_bedroom_1=off; friendly_name=Master bedroom 1 @ 19:03:40 25-01-2016>> Jan 25 19:03:40 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: entity_id=light.master_bedroom_light_strip, new_state=<state light.master_bedroom_light_strip=off; friendly_name=Master bedroom light strip @ 19:03:40 25-01-2016>> Jan 25 19:03:40 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: entity_id=light.master_bedroom_3, new_state=<state light.master_bedroom_3=off; friendly_name=Master bedroom 3 @ 19:03:40 25-01-2016>> Jan 25 19:03:40 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: entity_id=light.master_bedroom_2, new_state=<state light.master_bedroom_2=off; friendly_name=Master bedroom 2 @ 19:03:40 25-01-2016>> Jan 25 19:03:40 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: entity_id=light.living_room_light_1, new_state=<state light.living_room_light_1=on; friendly_name=Living room light 1, brightness=254 @ 19:03:40 25-01-2016>> Jan 25 19:03:40 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: entity_id=light.aprils_lamp, new_state=<state light.aprils_lamp=on; friendly_name=April's lamp, brightness=254 @ 19:03:40 25-01-2016>> Jan 25 19:03:40 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: entity_id=light.living_room_light_2, new_state=<state light.living_room_light_2=on; friendly_name=Living room light 2, brightness=254 @ 19:03:40 25-01-2016>> Jan 25 19:03:40 home-assistant hass[1416]: INFO:homeassistant.components.media_player.plex:Connected to: htts://192.168.86.4:32400 Jan 25 19:03:40 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: entity_id=group.all_lights, new_state=<state group.all_lights=unknown; entity_id=[], auto=True, friendly_name=all lights @ 19:03:40 25-01-2016>> Jan 25 19:03:40 home-assistant hass[1416]: INFO:plexapi:GET http://192.168.86.4:32400/clients Jan 25 19:03:40 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: entity_id=group.all_lights, new_state=<state group.all_lights=on; entity_id=('light.master_bedroom_3', 'light.aprils_lamp', 'light.living_room_light_1', 'light.master_bedroom_1', 'light.master_bedroom_2', 'light.master_bedroom_light_strip', 'light.living_room_light_2'), auto=True, friendly_name=all lights @ 19:03:40 25-01-2016>> Jan 25 19:03:40 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.4 Jan 25 19:03:40 home-assistant hass[1416]: INFO:plexapi:GET http://192.168.86.4:32400/status/sessions Jan 25 19:03:40 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.4 Jan 25 19:03:40 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 Jan 25 19:03:40 home-assistant hass[1416]: ERROR:homeassistant.components.switch:Error while setting up platform wemo Jan 25 19:03:40 home-assistant hass[1416]: Traceback (most recent call last): Jan 25 19:03:40 home-assistant hass[1416]: File "/usr/local/lib/python3.4/dist-packages/homeassistant/helpers/entity_component.py", line 145, in _setup_platform Jan 25 19:03:40 home-assistant hass[1416]: self.hass, platform_config, self.add_entities, discovery_info) Jan 25 19:03:40 home-assistant hass[1416]: File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/switch/wemo.py", line 25, in setup_platform Jan 25 19:03:40 home-assistant hass[1416]: import pywemo.discovery as discovery Jan 25 19:03:40 home-assistant hass[1416]: AttributeError: 'module' object has no attribute 'discovery' Jan 25 19:03:40 home-assistant hass[1416]: INFO:pywemo.subscribe:Listening on port 8989 Jan 25 19:03:40 home-assistant hass[1416]: ERROR:homeassistant.components.switch:Error while setting up platform wemo Jan 25 19:03:40 home-assistant hass[1416]: Traceback (most recent call last): Jan 25 19:03:40 home-assistant hass[1416]: File "/usr/local/lib/python3.4/dist-packages/homeassistant/helpers/entity_component.py", line 145, in _setup_platform Jan 25 19:03:40 home-assistant hass[1416]: self.hass, platform_config, self.add_entities, discovery_info) Jan 25 19:03:40 home-assistant hass[1416]: File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/switch/wemo.py", line 25, in setup_platform Jan 25 19:03:40 home-assistant hass[1416]: import pywemo.discovery as discovery Jan 25 19:03:40 home-assistant hass[1416]: AttributeError: 'module' object has no attribute 'discovery' Jan 25 19:03:40 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 Jan 25 19:03:40 home-assistant hass[1416]: INFO:homeassistant.components.media_player:Updating media_player entities Jan 25 19:03:40 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 Jan 25 19:03:40 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 Jan 25 19:03:40 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 Jan 25 19:03:40 home-assistant hass[1416]: INFO:pychromecast:Querying device status Jan 25 19:03:40 home-assistant hass[1416]: INFO:pychromecast:Querying device status Jan 25 19:03:40 home-assistant hass[1416]: INFO:pychromecast:Querying device status Jan 25 19:03:40 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.102 Jan 25 19:03:40 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.101 Jan 25 19:03:40 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.142 Jan 25 19:03:40 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 Jan 25 19:03:40 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 Jan 25 19:03:40 home-assistant hass[1416]: INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=1,c=1,t=16,pt=0,l=1,sg=0:0 Jan 25 19:03:40 home-assistant hass[1416]: INFO:homeassistant.components.mysensors:update sensor_update: node 1 Jan 25 19:03:40 home-assistant hass[1416]: INFO:homeassistant.components.mysensors:No sketch_name: node 1 Jan 25 19:03:40 home-assistant hass[1416]: INFO:homeassistant.components.mysensors:No sketch_name: node 1 Jan 25 19:03:41 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: entity_id=media_player.man_cave, new_state=<state media_player.man_cave=off; supported_media_commands=1021, friendly_name=Man Cave @ 19:03:40 25-01-2016>> Jan 25 19:03:41 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 Jan 25 19:03:41 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 Jan 25 19:03:41 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: entity_id=media_player.master_bedroom, new_state=<state media_player.master_bedroom=off; supported_media_commands=1021, friendly_name=Master Bedroom @ 19:03:41 25-01-2016>> Jan 25 19:03:41 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 Jan 25 19:03:41 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 Jan 25 19:03:41 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 Jan 25 19:03:41 home-assistant hass[1416]: INFO:pywemo.subscribe:Subscribing to events from <WeMo Switch "LivingRoomLamp"> Jan 25 19:03:41 home-assistant hass[1416]: INFO:pywemo.subscribe:Resubscribe for <WeMo Switch "LivingRoomLamp"> Jan 25 19:03:41 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 Jan 25 19:03:41 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 Jan 25 19:03:41 home-assistant hass[1416]: INFO:pywemo.subscribe:Received event from <WeMo Switch "LivingRoomLamp">(192.168.86.163) Jan 25 19:03:41 home-assistant hass[1416]: INFO:homeassistant.components.switch.wemo:Subscription update for <WeMo Switch "LivingRoomLamp"> Jan 25 19:03:41 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: entity_id=switch.livingroomlamp, new_state=<state switch.livingroomlamp=on; friendly_name=LivingRoomLamp @ 19:03:41 25-01-2016>> Jan 25 19:03:41 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: entity_id=group.all_switches, new_state=<state group.all_switches=unknown; entity_id=[], auto=True, friendly_name=all switches @ 19:03:41 25-01-2016>> Jan 25 19:03:41 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: entity_id=group.all_switches, new_state=<state group.all_switches=on; entity_id=('switch.livingroomlamp',), auto=True, friendly_name=all switches @ 19:03:41 25-01-2016>> Jan 25 19:03:41 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163 Jan 25 19:03:41 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: entity_id=media_player.living_room, new_state=<state media_player.living_room=off; supported_media_commands=1021, friendly_name=Living Room @ 19:03:41 25-01-2016>> Jan 25 19:03:45 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117 Jan 25 19:03:50 home-assistant hass[1416]: INFO:homeassistant.components.media_player:Updating media_player entities Jan 25 19:03:51 home-assistant hass[1416]: INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=0,t=17,pt=0,l=5,sg=0:1.5.1 Jan 25 19:03:51 home-assistant hass[1416]: INFO:homeassistant.components.mysensors:update sensor_update: node 1 Jan 25 19:03:51 home-assistant hass[1416]: INFO:homeassistant.components.mysensors:No sketch_name: node 1 Jan 25 19:03:51 home-assistant hass[1416]: INFO:homeassistant.components.mysensors:No sketch_name: node 1 Jan 25 19:03:51 home-assistant hass[1416]: INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0 Jan 25 19:03:51 home-assistant hass[1416]: INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:send: 0-0-1-1 s=255,c=3,t=6,pt=0,l=1,sg=0,st=ok:M Jan 25 19:03:53 home-assistant hass[1416]: INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=11,pt=0,l=13,sg=0:Motion Sensor Jan 25 19:03:53 home-assistant hass[1416]: INFO:homeassistant.components.mysensors:update sensor_update: node 1 Jan 25 19:03:53 home-assistant hass[1416]: INFO:homeassistant.components.mysensors:adding new devices: [<Entity Motion Sensor 1.1: >] Jan 25 19:04:00 home-assistant hass[1416]: Exception in thread Thread-15: Jan 25 19:04:00 home-assistant hass[1416]: Traceback (most recent call last): Jan 25 19:04:00 home-assistant hass[1416]: File "/usr/lib/python3.4/threading.py", line 920, in _bootstrap_inner Jan 25 19:04:00 home-assistant hass[1416]: self.run() Jan 25 19:04:00 home-assistant hass[1416]: File "/home/pi/.homeassistant/lib/mysensors/mysensors.py", line 312, in run Jan 25 19:04:00 home-assistant hass[1416]: response = self.handle_queue() Jan 25 19:04:00 home-assistant hass[1416]: File "/home/pi/.homeassistant/lib/mysensors/mysensors.py", line 222, in handle_queue Jan 25 19:04:00 home-assistant hass[1416]: reply = func(*args, **kwargs) Jan 25 19:04:00 home-assistant hass[1416]: File "/home/pi/.homeassistant/lib/mysensors/mysensors.py", line 112, in logic Jan 25 19:04:00 home-assistant hass[1416]: return self._handle_internal(msg) Jan 25 19:04:00 home-assistant hass[1416]: File "/home/pi/.homeassistant/lib/mysensors/mysensors.py", line 74, in _handle_internal Jan 25 19:04:00 home-assistant hass[1416]: self.alert(msg.node_id) Jan 25 19:04:00 home-assistant hass[1416]: File "/home/pi/.homeassistant/lib/mysensors/mysensors.py", line 175, in alert Jan 25 19:04:00 home-assistant hass[1416]: self.event_callback("sensor_update", nid) Jan 25 19:04:00 home-assistant hass[1416]: File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/mysensors.py", line 226, in node_update Jan 25 19:04:00 home-assistant hass[1416]: callback(self, node_id) Jan 25 19:04:00 home-assistant hass[1416]: File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/mysensors.py", line 165, in mysensors_callback Jan 25 19:04:00 home-assistant hass[1416]: add_devices(devices[node_id]) Jan 25 19:04:00 home-assistant hass[1416]: File "/usr/local/lib/python3.4/dist-packages/homeassistant/helpers/entity_component.py", line 81, in add_entities Jan 25 19:04:00 home-assistant hass[1416]: entity.update_ha_state() Jan 25 19:04:00 home-assistant hass[1416]: File "/usr/local/lib/python3.4/dist-packages/homeassistant/helpers/entity.py", line 108, in update_ha_state Jan 25 19:04:00 home-assistant hass[1416]: self.unit_of_measurement is not None: Jan 25 19:04:00 home-assistant hass[1416]: File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/sensor/mysensors.py", line 137, in unit_of_measurement Jan 25 19:04:00 home-assistant hass[1416]: self.value_type == self.gateway.const.SetReq.V_PERCENTAGE or \ Jan 25 19:04:00 home-assistant hass[1416]: File "/usr/lib/python3.4/enum.py", line 255, in __getattr__ Jan 25 19:04:00 home-assistant hass[1416]: raise AttributeError(name) from None Jan 25 19:04:00 home-assistant hass[1416]: AttributeError: V_PERCENTAGE Jan 25 19:04:00 home-assistant hass[1416]: INFO:homeassistant.components.media_player:Updating media_player entities Jan 25 19:04:00 home-assistant hass[1416]: INFO:homeassistant.components.light:Updating light entities Jan 25 19:04:00 home-assistant hass[1416]: INFO:homeassistant.components.camera:Updating camera entities Jan 25 19:04:00 home-assistant hass[1416]: INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: old_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453763010.532438, friendly_name=LivingRoom Camera @ 19:03:23 25-01-2016>, entity_id=camera.livingroom_camera, new_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453763040.5191662, friendly_name=LivingRoom Camera @ 19:03:23 25-01-2016>> Jan 25 19:04:00 home-assistant hass[1416]: INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117
-
All the messages logged from the gateway look good in the latest log output without errors. Only thing missing is a log line saying "adding new devices...". There are three main reasons why this doesn't happen when the code executes:
- A device with the same node id is already added.
- Some node/sensor data is missing in the data stuctures, sketch name, child id, S_TYPE, V_TYPE.
- The S_TYPE and V_TYPE for the child sensor is not handled by any of the platforms that home assistant supports.
All pure sensors in version 1.5 are currently supported by the sensor platform. The switch platform supports:
S_DOOR,
S_MOTION,
S_SMOKE,
S_LIGHT,
S_LOCK,
S_BINARY,
S_SPRINKLER,
S_WATER_LEAK,
S_SOUND,
S_VIBRATION,
S_MOISTURE,
V_ARMED,
V_LIGHT,
V_LOCK_STATUS,
V_STATUSThere's a bug if you don't specify version 1.5 in the config of home assistant. It's related to the V_PERCENTAGE attribute error. I'm fixing that now. But I don't think that's your problem here. My guess is point 1 or 2 above is the problem.
You could try the following:
- Remove any json or pickle persistence files from your config directory.
- Activate persistence in your config (and set version 1.5).
- Connect your gateway
- Start hass
- Wait for "gateway started" log line
- Connect the sensor
- If no errors occur, open the newly generated persistence file and copy/paste the contents here. This might give us more clues.
-
I'm trying to replicate the problem, and there seem to be some issue with adding devices "on the fly" and not from the persistence file.
A workaround seems to be, as @asm reported:
- Activate persistence
- Present sensors and send a value per sensor
- Restart home assistant
I'll try to figure out the cause and make a fix.
-
Ok, I've found the bug. I'll make the fix and pull request to home assistant. It should make the next release.
Until then the workaround above should be usable, at least.
Make sure you present the sensors and send at least one value per sensor, and the persistence file will be populated. Then after the restart of home assistant your sensors should show in the gui.
Sorry for the inconvenience, and thanks for helping me troubleshoot this! I really appreciate all feedback and also any criticism, which in the end will make the controller and plugin better.
-
@martinhjelmare thank you !
Yesterday I finally got all the sensors in the UI using the workaround, so now it looks fine, but I'll update when the fix is available.
Thanks again!
-
Hi @martinhjelmare and @asm
Confirmed: I have the one node i set for auto-id working now. I had to still add the 1.5 version info to configuration.yaml for it to show properly though - so all lines that are on the Components page of the HA wiki are NEEDED. And the reboot of HA worked after enabling persistence and the v1.5
I'll work with my manually assigned ID's on the weekend - got too many courses/work to do the rest of the week. Thank you both again for your help, it was very much appreciated.
And @martinhjelmare keep up the great work on the addon, loving it. And if any advice, the only thing I wish is there was an option to have an ethernet gateway over the serial.
-
@drock1985 said:
And @martinhjelmare keep up the great work on the addon, loving it. And if any advice, the only thing I wish is there was an option to have an ethernet gateway over the serial.
I'm not following completely. How do you mean ethernet gateway over serial? I know @Yveaux has made a Perl script to interface serial with mqtt. Is that what you mean?
-
@martinhjelmare said:
@drock1985 said:
And @martinhjelmare keep up the great work on the addon, loving it. And if any advice, the only thing I wish is there was an option to have an ethernet gateway over the serial.
I'm not following completely. How do you mean ethernet gateway over serial? I know @Yveaux has made a Perl script to interface serial with mqtt. Is that what you mean?
Hi,
I mean that I would rather Home Assistant had an Ethernet Gateway over the Serial one. Don't know why but personally I find the Ethernet Gateway to be more stable/compatible than Serial (that goes for any home automation controller i've tried).
-
Oh, ok. I'm working on an ethernet gateway plugin. Needs some more testing, before I can submit it.
If you want to beta test, I can ping you when its more or less ready?
-
I would love to beta test a gateway, no problem. Let me know when you need testing.
Also just a quick general Home-assistant question. Is it possible to rename devices? Not a big deal, but I notice that the sketch name is the default name of the device, and wasn't too sure if HA allows you to give them nick names or the like.
Thanks,
-
Yes, it's possible to rename devices and also customize icons etc.
See my post here:
http://forum.mysensors.org/topic/2388/home-assistant-how-to-recognize-mysensors-nodes/64
