[Solved] Nodes ignore I_FIND_PARENT_RESPONSE message?

[b0rmann]

2.0.1-beta

mqtt client gateway (RPi) log:

TSF:MSG:READ,3-3-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
TSF:MSG:BC
TSF:MSG:FPAR REQ,ID=3
TSF:CHKUPL:OK,FCTRL
TSF:MSG:GWL OK
TSF:MSG:SEND,0-0-3-3,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
TSF:MSG:READ,2-2-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
TSF:MSG:BC
TSF:MSG:FPAR REQ,ID=2
TSF:CHKUPL:OK,FCTRL
TSF:MSG:GWL OK
TSF:MSG:SEND,0-0-2-2,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
TSF:MSG:READ,1-1-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
TSF:MSG:BC
TSF:MSG:FPAR REQ,ID=1
TSF:CHKUPL:OK,FCTRL
TSF:MSG:GWL OK
TSF:MSG:SEND,0-0-1-1,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
TSF:MSG:READ,3-3-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
TSF:MSG:BC
TSF:MSG:FPAR REQ,ID=3
TSF:CHKUPL:OK,FCTRL
TSF:MSG:GWL OK
TSF:MSG:SEND,0-0-3-3,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
TSF:MSG:READ,2-2-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
TSF:MSG:BC
TSF:MSG:FPAR REQ,ID=2
TSF:CHKUPL:OK,FCTRL
TSF:MSG:GWL OK
TSF:MSG:SEND,0-0-2-2,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
TSF:MSG:READ,2-2-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
TSF:MSG:BC
TSF:MSG:FPAR REQ,ID=2
TSF:CHKUPL:OK,FCTRL
TSF:MSG:GWL OK
TSF:MSG:SEND,0-0-2-2,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
TSF:MSG:READ,3-3-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
TSF:MSG:BC
TSF:MSG:FPAR REQ,ID=3
TSF:CHKUPL:OK,FCTRL
TSF:MSG:GWL OK
TSF:MSG:SEND,0-0-3-3,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
TSF:MSG:READ,2-2-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
TSF:MSG:BC
TSF:MSG:FPAR REQ,ID=2
TSF:CHKUPL:OK,FCTRL
TSF:MSG:GWL OK
TSF:MSG:SEND,0-0-2-2,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
TSF:MSG:READ,2-2-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
TSF:MSG:BC
TSF:MSG:FPAR REQ,ID=2
TSF:CHKUPL:OK,FCTRL
TSF:MSG:GWL OK
TSF:MSG:SEND,0-0-2-2,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0

[tekka]

@b0rmann With this piece of information it's hard to guess - please provide additional information such as sketch of your node(s) + full debug logs.

[b0rmann]

nopde #1 - only repeater...

#define MY_SPECIAL_DEBUG 
#define MY_BAUD_RATE 9600
#define MY_RADIO_NRF24
#define MY_NODE_ID 1
#define MY_PARENT_NODE_ID 0
#define MY_RF24_CE_PIN 9
#define MY_RF24_CS_PIN 10
#define MY_RF24_CHANNEL 1   
#define MY_REPEATER_FEATURE

#include <MySensors.h>

void setup() {}

void presentation() {
  sendSketchInfo("Repeater", "1.1");
}

void loop() {}

[tekka]

@tekka said:

@b0rmann With this piece of information it's hard to guess - please provide additional information such as sketch of your node(s) + full debug logs.

You really have to provide the requested information if you want to receive support from forum members.

Please provide sketches of node 2 and 3 and their debug logs.

[b0rmann]

@tekka
node 1, 2 and 3 have logging off :(
btw, problem not in the sketches.

#define MY_SPECIAL_DEBUG 
#define MY_BAUD_RATE 9600
#define MY_RADIO_NRF24
#define MY_NODE_ID 2
#define MY_PARENT_NODE_ID 0
#define MY_RF24_CE_PIN A0
#define MY_RF24_CS_PIN 10
#define MY_RF24_CHANNEL 1   
#define MY_REPEATER_FEATURE

#include <MySensors.h>
#include <DallasTemperature.h>
#include <OneWire.h>

#define PIN_ONE_WIRE 4 

#define MAX_ATTACHED_DS18B20 4
#define TEMPERATURE_PRECISION 11

#define MIN_TIMEOUT 600000ul
#define MAX_TIMEOUT 900000ul

// DS18B20
OneWire oneWire(PIN_ONE_WIRE);
DallasTemperature ds(&oneWire);

unsigned long ds_last_read;

DeviceAddress ds18b20[MAX_ATTACHED_DS18B20];
int numDS=0;

// Initialize temperature message
MyMessage msg_t(0, V_TEMP);

void sendDS ();

void before() {
    ds.begin();
    numDS = ds.getDeviceCount();
}

void setup() {}

void presentation() {
    wait(100);
    sendSketchInfo("Podlaha", "3.0");

    for ( int i = 0; i < MAX_ATTACHED_DS18B20; i++ ) {
        if ( ds.getAddress(ds18b20[i], i)) {
            ds.setResolution(ds18b20[i], TEMPERATURE_PRECISION);
            wait(100);
            present(ds18b20[i][7], S_TEMP, "DS18B20");
        }
    }
}
void loop() {
    unsigned long time = millis();

    if ( ds_last_read && time - ds_last_read < MIN_TIMEOUT ) return;

    ds_last_read = time;

    ds.requestTemperatures();

    for ( int i=0; i < numDS && i < MAX_ATTACHED_DS18B20; i++ ) {

        if ( ! ds18b20[i] ) continue;

        float temperature = ds.getTempC(ds18b20[i]);

        if ( temperature < -50 ) continue;
        if ( temperature > 120 ) continue;
        if ( temperature == 85 ) continue;

        send( msg_t.setSensor(ds18b20[i][7]).set(temperature, 1), false );
    }
}

[b0rmann]

node #5, with older mysensors library (2.0.0) work correctly

TSF:MSG:READ,5-5-0,s=3,c=1,t=24,pt=7,l=5,sg=0:678627392
Sending message on topic: MyGW1-out/5/3/1/0/24
TSF:MSG:READ,5-5-0,s=255,c=3,t=22,pt=5,l=4,sg=0:32231
Sending message on topic: MyGW1-out/5/255/3/0/22

[b0rmann]

log from node #3...

MCO:BGN:INIT REPEATER,CP=RNNRA--,VER=2.0.1-beta
TSM:INIT
TSM:INIT:TSP OK
TSM:INIT:STATID,ID=3
TSF:ASID:OK,ID=3
TSM:FPAR
TSF:MSG:SEND,3-3-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSF:MSG:READ,2-2-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
TSF:MSG:BC
TSF:MSG:READ,5-5-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
TSF:MSG:BC
TSF:MSG:READ,2-2-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
TSF:MSG:BC
!TSM:FPAR:NO REPLY
TSM:FPAR
TSF:MSG:SEND,3-3-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSF:MSG:READ,2-2-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
TSF:MSG:BC
!TSM:FPAR:NO REPLY
TSM:FPAR
TSF:MSG:SEND,3-3-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
!TSM:FPAR:NO REPLY
TSM:FPAR
TSF:MSG:SEND,3-3-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
!TSM:FPAR:FAIL
TSM:FAILURE
TSM:FAILURE:PDT

[tekka]

@b0rmann It's hard to analyse your problem if you do not provide the requested information. Please provide these information, in this order:
(1) Are all nodes + GW running the latest dev version, i.e. 2.0.1-beta?
(2) GW sketch
(3) GW full debug log
(4) node 2 full debug log

[b0rmann]

yes, it's too hard :)

1. yes
2. gw nave not "sketch", it's raspberry pi port of gw

...

problem solved by using external power source on radio (instead 3v3 raspberry pi output)

[tekka]

@b0rmann ok, great :)