Repeater

[Dragon]

How do i do a repeater node? I cant found it in the code anymore?

[mfalkvidd]

@Dragon the instructions on https://www.mysensors.org/download/sensor_api_20#create-repeating-nodes should be all you need - have you seen it?

[Dragon]

@mfalkvidd thanks i missed that. So i only need to write this in the code #define MY_REPEATER_FEATURE

[mfalkvidd]

@Dragon yes, and no sleeping because a sleeping node can not receive messages.

[Dragon]

@mfalkvidd Thanks

[รอเรือ]

Then I guess the following code will do just fine.

#define MY_DEBUG 
#define NODE_ID 7 // Set node ID here
#define SKETCH_NAME "Repeater Node"
#define SKETCH_VERSION "1.1"

	
// Enable and select radio type attached
#define MY_RADIO_NRF24
//#define MY_RADIO_RFM69

// Enabled repeater feature for this node
#define MY_REPEATER_FEATURE

#include <SPI.h>
#include <MySensors.h>

void setup() {
  
}

void presentation()  
{  
  //Send the sensor node sketch version information to the gateway
  sendSketchInfo(SKETCH_NAME, SKETCH_VERSION);
}

void loop() 
{
}

[manutremo]

@รอเรือ I think some things are missing in that code. This is the one I'm using.

#define MY_DEBUG 
#define MY_NODE_ID 2 // Set node ID here, or remove for Auto
#define SKETCH_NAME "Repeater Node"
#define SKETCH_VERSION "2.1.1"
#define CHILD_ID 1

// Enable and select radio type attached
#define MY_RADIO_NRF24
//Set other radio options here if needed
//#define MY_RADIO_RFM69

// Enabled repeater feature for this node
#define MY_REPEATER_FEATURE

#include <SPI.h>
#include <MySensors.h>

void presentation()  
{  
  //Send the sensor node sketch version information to the gateway
  sendSketchInfo(SKETCH_NAME, SKETCH_VERSION);
  present(CHILD_ID, S_ARDUINO_REPEATER_NODE);
}

void loop() 
{
}

[รอเรือ]

thank You @manutremo :blush: