Removing Gateway and Nodes from Vera



  • So, i ran some tests and got things working, everything is great. Now i want to break it all apart and start from scratch for some other tests. I've searched high and low on the proper way to remove the nodes and the gateway from Vera, but i have not found anything. can someone give me some pointers. My assumption is to delete them from vera and clearing the eeprom on all components and adding them in again. Any clues?


  • Admin

    If you remove gateway device all children should be deleted as well.

    Clearing EEPROM is good if you want to remove the nodes ids.



  • Continuing the theme. In order to use the same node this other sensors (to make some tests, especially with mergering several sensors on one board) I had to delete sensors from Vera, without deleting the node. Is it?


  • Admin

    @virgus1970

    Yep, no need to remove the "Node"-device.



  • Thanks. But as for me sometimes for some reason it doesn't work (however sometimes everything OK). Then I clear EEPROM of Arduino board (sensor) I have the same problem


  • Admin

    If you clear eeprom you have to remove node device also (which is tied to the id you're removing).


Log in to reply
 

Suggested Topics

  • 1
  • 2
  • 1
  • 10
  • 5

25
Online

11.2k
Users

11.1k
Topics

112.5k
Posts